On Tue, Feb 04, 2014 at 01:40:43PM +0000, Lee Jones wrote: > > The BCM59056 is a multi-function power management unit used with the > > BCM281xx family of SoCs. This series adds an MFD and voltage regulator > > driver to support the BCM59056. The bcm28155-ap DT support is updated > > to enable use of regulators on the otg and sdhci peripherals. > > > > Matt Porter (6): > > i2c: bcm-kona: register with subsys_initcall > > regulator: add bcm59056 pmu DT binding > > mfd: add bcm59056 pmu driver > > regulator: add bcm59056 regulator driver > > ARM: configs: bcm_defconfig: enable bcm59056 regulator support > > ARM: dts: add bcm59056 pmu support and enable for bcm28155-ap > > > > .../devicetree/bindings/regulator/bcm59056.txt | 37 ++ > > arch/arm/boot/dts/bcm28155-ap.dts | 41 ++ > > arch/arm/boot/dts/bcm59056.dtsi | 158 ++++++++ > > arch/arm/configs/bcm_defconfig | 7 + > > drivers/i2c/busses/i2c-bcm-kona.c | 14 +- > > drivers/mfd/Kconfig | 8 + > > drivers/mfd/Makefile | 1 + > > drivers/mfd/bcm59056.c | 119 ++++++ > > drivers/regulator/Kconfig | 8 + > > drivers/regulator/Makefile | 1 + > > drivers/regulator/bcm59056-regulator.c | 445 +++++++++++++++++++++ > > include/linux/mfd/bcm59056.h | 35 ++ > > 12 files changed, 873 insertions(+), 1 deletion(-) > > create mode 100644 Documentation/devicetree/bindings/regulator/bcm59056.txt > > create mode 100644 arch/arm/boot/dts/bcm59056.dtsi > > create mode 100644 drivers/mfd/bcm59056.c > > create mode 100644 drivers/regulator/bcm59056-regulator.c > > create mode 100644 include/linux/mfd/bcm59056.h > > FYI: Mark's email address is not correct. Not sure where you pulled > this one up from, but he doesn't have access to it anymore. Thanks, I already updated (it was a stale .mutt/aliases entry here) it after the bounces. -Matt -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
