Re: [PATCH 3/4] i2c: rcar: do not print error if device nacks transfer

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 24/01/14 17:11, Wolfram Sang wrote:
On Fri, Jan 17, 2014 at 06:11:37PM +0000, Ben Dooks wrote:
The i2c-rcar driver currently prints an error message if the master_xfer
callback fails. However if the bus is being probed then lots of NAKs
will be generated, causing the output of a number of errors printed.

To solve this, disable the print if the error is not -EREMOTEIO.

Basically OK. Yet, according to 'fault-codes" it should be -ENXIO. May
be a good time to fix this as well.

Also, you might want to print for -EIO only? Or do you want to see
-EAGAIN, too?

Ok, although the change to the error code should probably be a separate
patch instead of modifying this one.

--
Ben Dooks				http://www.codethink.co.uk/
Senior Engineer				Codethink - Providing Genius
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux