On Monday 23 December 2013 11:51:12 Martin Mokrejs wrote:
> Thanks for the note, was just compiling a new 3.10.24 kernel to test it.
> ;-)
>
> So far just booted an old 3.9 kernel and after plugging in an external
> USB3 drive I got the message, just to be sure I am still able to reproduce
> the error and that I have the right .config in the running kernel.
>
> Will wait for another fix instead.
> Martin
There is still one thing I do not fully understand, how should
dev_set_drvdata and dev_get_drvdata be used? For the devices passed
to probe functions, the core takes care of setting to NULL on error.
Then device_unregister frees the memory, right?
Now, what if the dev_set_drvdata (or aliases such as pci_set_drvdata,
i2c_set_adapinfo, etc.) are manually called outside probe functions?
Or inside the probe function, but not for the device that is being
probed (such as is the case with the i801 i2c driver)?
The VFIO driver also does something odd, it clears the driver data,
but the device holding it is freed using kfree():
static void vfio_device_release(struct kref *kref) {
struct vfio_device *device = container_of(kref,
struct vfio_device, kref);
struct vfio_group *group = device->group;
list_del(&device->group_next);
mutex_unlock(&group->device_lock);
dev_set_drvdata(device->dev, NULL);
kfree(device);
Is a memory leak also present here since dev_set_drvdata() always tries to
allocate memory?
Regards,
Peter
> Peter Wu wrote:
> > Nevermind this patch, it does not really fix the memleak because
> > i2c_set_adapdata() calls dev_set_drvdata() which allocates memory.
> > (I must have ran kmemleak too early, right after boot it did not
> > give any warnings, now it does).
> >
> > RFC: what about dropping i2c_set_adapdata() from the probe function
> > and replacing i2c_get_adapdata(adapter) by
> > pci_get_drvdata(adapter->pci_dev) on top of this patch? I am not
> > sure what the purpose is for i2c_set_adapdata, hence this question.
> >
> > Regards,
> > Peter
> >
> > On Monday 23 December 2013 10:39:38 Peter Wu wrote:
> >> The driver-specific data for i801 was only set for the device on
> >> success, that led to a memory leak on error paths (for instance, when
> >> there is a resource conflict with ACPI). (The driver core clears the
> >> driver data (if set) if the probe routine fails).
> >>
> >> Fix it by setting the driver data right after successful memory
> >> allocation, before reaching any error paths.
> >>
> >> References: http://lkml.org/lkml/2013/1/23/191
> >> Reported-by: Martin Mokrejs <mmokrejs@xxxxxxxxxxxxxxxxxx>
> >> Tested-by: Peter Wu <lekensteyn@xxxxxxxxx> [ACPI conflict error path]
> >> Signed-off-by: Peter Wu <lekensteyn@xxxxxxxxx>
> >> ---
> >> Hi Jean,
> >>
> >> This memleak issue is still present in v3.13-rc4-256-gb7000ad.
> >> From kmemleak:
> >>
> >> unreferenced object 0xffff88022f501a00 (size 256):
> >> comm "systemd-udevd", pid 209, jiffies 4294896115 (age 2872.520s)
> >> hex dump (first 32 bytes):
> >> 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N..........
> >> ff ff ff ff ff ff ff ff f4 e2 53 82 ff ff ff ff ..........S.....
> >> backtrace:
> >> [<ffffffff815d29ce>] kmemleak_alloc+0x4e/0xb0
> >> [<ffffffff8116ea5a>] kmem_cache_alloc_trace+0xfa/0x1e0
> >> [<ffffffff813efc63>] device_private_init+0x23/0x80
> >> [<ffffffff813f2b49>] dev_set_drvdata+0x39/0x50
> >> [<ffffffffa0294539>] i801_probe+0x59/0x528 [i2c_i801]
> >> [<ffffffff81332d95>] local_pci_probe+0x45/0xa0
> >> [<ffffffff81333be9>] pci_device_probe+0xd9/0x130
> >> [<ffffffff813f30e7>] driver_probe_device+0x87/0x390
> >> [<ffffffff813f34c3>] __driver_attach+0x93/0xa0
> >> [<ffffffff813f102b>] bus_for_each_dev+0x6b/0xb0
> >> [<ffffffff813f2b0e>] driver_attach+0x1e/0x20
> >> [<ffffffff813f26e8>] bus_add_driver+0x188/0x260
> >> [<ffffffff813f3b04>] driver_register+0x64/0xf0
> >> [<ffffffff81332930>] __pci_register_driver+0x60/0x70
> >> [<ffffffffa02990af>] 0xffffffffa02990af
> >> [<ffffffff81000312>] do_one_initcall+0xf2/0x1a0
> >>
> >> The dmesg for this laptop also contains a resource conflict message,
> >> just like the reporter (Martin Mokrejs):
> >>
> >> [ 15.409772] ACPI Warning: 0x0000000000001840-0x000000000000185f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251)
> >> [ 15.413439] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> >>
> >> With this patch applied on top of almost 3.13-rc5 (v3.13-rc4-256-gb7000ad),
> >> the memleak is gone.
> >>
> >> Regards,
> >> Peter
> >> ---
> >> drivers/i2c/busses/i2c-i801.c | 3 +--
> >> 1 file changed, 1 insertion(+), 2 deletions(-)
> >>
> >> diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
> >> index 737e298..a7096bf 100644
> >> --- a/drivers/i2c/busses/i2c-i801.c
> >> +++ b/drivers/i2c/busses/i2c-i801.c
> >> @@ -1117,6 +1117,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
> >> if (!priv)
> >> return -ENOMEM;
> >>
> >> + pci_set_drvdata(dev, priv);
> >> i2c_set_adapdata(&priv->adapter, priv);
> >> priv->adapter.owner = THIS_MODULE;
> >> priv->adapter.class = i801_get_adapter_class(priv);
> >> @@ -1236,8 +1237,6 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
> >> /* We ignore errors - multiplexing is optional */
> >> i801_add_mux(priv);
> >>
> >> - pci_set_drvdata(dev, priv);
> >> -
> >> return 0;
> >>
> >> exit_free_irq:
> >>
> >
> >
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
