The previous diolan adapter uses other out/in endpoints than
the current DLN-2-U2C in compatibility mode.
They changed from 0x2/0x84 to 0x3/0x83.
This patch gets the endpoints from the usb interface, instead
of hardcode them in the driver.
This was tested on a current DLN-2-U2C board.
Signed-off-by: Martin Vogt <mvogt1@xxxxxxxxx>
---
drivers/i2c/busses/i2c-diolan-u2c.c | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)
diff --git a/drivers/i2c/busses/i2c-diolan-u2c.c b/drivers/i2c/busses/i2c-diolan-u2c.c
index dae3ddf..721f7eb 100644
--- a/drivers/i2c/busses/i2c-diolan-u2c.c
+++ b/drivers/i2c/busses/i2c-diolan-u2c.c
@@ -25,8 +25,6 @@
#define USB_VENDOR_ID_DIOLAN 0x0abf
#define USB_DEVICE_ID_DIOLAN_U2C 0x3370
-#define DIOLAN_OUT_EP 0x02
-#define DIOLAN_IN_EP 0x84
/* commands via USB, must match command ids in the firmware */
#define CMD_I2C_READ 0x01
@@ -84,6 +82,7 @@
struct i2c_diolan_u2c {
u8 obuffer[DIOLAN_OUTBUF_LEN]; /* output buffer */
u8 ibuffer[DIOLAN_INBUF_LEN]; /* input buffer */
+ int ep_in, ep_out; /* Endpoints */
struct usb_device *usb_dev; /* the usb device for this device */
struct usb_interface *interface;/* the interface for this device */
struct i2c_adapter adapter; /* i2c related things */
@@ -109,7 +108,7 @@ static int diolan_usb_transfer(struct i2c_diolan_u2c *dev)
return -EINVAL;
ret = usb_bulk_msg(dev->usb_dev,
- usb_sndbulkpipe(dev->usb_dev, DIOLAN_OUT_EP),
+ usb_sndbulkpipe(dev->usb_dev, dev->ep_out),
dev->obuffer, dev->olen, &actual,
DIOLAN_USB_TIMEOUT);
if (!ret) {
@@ -118,7 +117,7 @@ static int diolan_usb_transfer(struct i2c_diolan_u2c *dev)
tmpret = usb_bulk_msg(dev->usb_dev,
usb_rcvbulkpipe(dev->usb_dev,
- DIOLAN_IN_EP),
+ dev->ep_in),
dev->ibuffer,
sizeof(dev->ibuffer), &actual,
DIOLAN_USB_TIMEOUT);
@@ -210,7 +209,7 @@ static void diolan_flush_input(struct i2c_diolan_u2c *dev)
int ret;
ret = usb_bulk_msg(dev->usb_dev,
- usb_rcvbulkpipe(dev->usb_dev, DIOLAN_IN_EP),
+ usb_rcvbulkpipe(dev->usb_dev, dev->ep_in),
dev->ibuffer, sizeof(dev->ibuffer), &actual,
DIOLAN_USB_TIMEOUT);
if (ret < 0 || actual == 0)
@@ -445,9 +444,14 @@ static void diolan_u2c_free(struct i2c_diolan_u2c *dev)
static int diolan_u2c_probe(struct usb_interface *interface,
const struct usb_device_id *id)
{
+ struct usb_host_interface *hostif = interface->cur_altsetting;
struct i2c_diolan_u2c *dev;
int ret;
+ if (hostif->desc.bInterfaceNumber != 0
+ || hostif->desc.bNumEndpoints < 2)
+ return -ENODEV;
+
/* allocate memory for our device state and initialize it */
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (dev == NULL) {
@@ -455,6 +459,8 @@ static int diolan_u2c_probe(struct usb_interface *interface,
ret = -ENOMEM;
goto error;
}
+ dev->ep_out = hostif->endpoint[0].desc.bEndpointAddress;
+ dev->ep_in = hostif->endpoint[1].desc.bEndpointAddress;
dev->usb_dev = usb_get_dev(interface_to_usbdev(interface));
dev->interface = interface;
--
1.8.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
