> This patch adds the support of the I2C_SMBUS_I2C_BLOCK_DATA
> transaction type for the iSMT SMBus Controller.
>
> Signed-off-by: Robert Valiquette <robert.valiquette@xxxxxxxxx>
> ---
> --- a/drivers/i2c/busses/i2c-ismt.c 2013-11-14 11:36:15.830322000 -0500
> +++ b/drivers/i2c/busses/i2c-ismt.c 2013-11-14 16:01:56.532356000 -0500
> @@ -344,6 +344,7 @@
> data->word = dma_buffer[0] | (dma_buffer[1] << 8);
> break;
> case I2C_SMBUS_BLOCK_DATA:
> + case I2C_SMBUS_I2C_BLOCK_DATA:
> memcpy(&data->block[1], dma_buffer, desc-
> >rxbytes);
> data->block[0] = desc->rxbytes;
> break;
> @@ -509,6 +510,41 @@
> }
> break;
>
> + case I2C_SMBUS_I2C_BLOCK_DATA:
> + /* Make sure the lenght is valid */
> + if (data->block[0] < 1)
> + data->block[0] = 1;
> +
> + if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
> + data->block[0] = I2C_SMBUS_BLOCK_MAX;
> +
> + if (read_write == I2C_SMBUS_WRITE) {
> + /* i2c Block Write */
> + dev_dbg(dev, "I2C_SMBUS_I2C_BLOCK_DATA:
> WRITE\n");
> + dma_size = data->block[0] + 1;
> + dma_direction = DMA_TO_DEVICE;
> + desc->wr_len_cmd = dma_size;
> + desc->control |= ISMT_DESC_I2C;
> + priv->dma_buffer[0] = command;
> + memcpy(&priv->dma_buffer[1], &data->block[1],
> dma_size);
> + } else {
> + /* i2c Block Read */
> + dev_dbg(dev, "I2C_SMBUS_I2C_BLOCK_DATA:
> READ\n");
> + dma_size = data->block[0];
> + dma_direction = DMA_FROM_DEVICE;
> + desc->rd_len = dma_size;
> + desc->wr_len_cmd = command;
> + desc->control |= (ISMT_DESC_I2C |
> ISMT_DESC_CWRL);
> + /*
> + * Per the "Table 15-15. I2C Commands",
> + * in the External Design Specification (EDS),
> + * (Document Number: 508084, Revision: 2.0),
> + * the _rw bit must be 0
> + */
> + desc->tgtaddr_rw = ISMT_DESC_ADDR_RW(addr, 0);
> + }
> + break;
> +
> default:
> dev_err(dev, "Unsupported transaction %d\n",
> size);
> @@ -582,6 +618,7 @@
> I2C_FUNC_SMBUS_WORD_DATA |
> I2C_FUNC_SMBUS_PROC_CALL |
> I2C_FUNC_SMBUS_BLOCK_DATA |
> + I2C_FUNC_SMBUS_I2C_BLOCK |
> I2C_FUNC_SMBUS_PEC;
> }
>
Acked-by: Seth Heasley <seth.heasley@xxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
