Re: [PATCH] I2C: busses: Do not print error message in syslog if no ACK received

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 2013-11-13 at 20:24 +0100, Marek Vasut wrote:
> > On Tue, Nov 12, 2013 at 07:33:40PM +0100, Marek Vasut wrote:
> > > > > That is because if you look at the only caller of this function,
> > > > > which is pch_i2c_wait_for_check_xfer(), you will see that at the
> > > > > only place where pch_i2c_getack() is called there is already
> > > > > pch_dbg():
> > > > > 
> > > > > 369         if (pch_i2c_getack(adap)) {
> > > > > 370                 pch_dbg(adap, "Receive NACK for slave address"
> > > > > 371                         "setting\n");
> > > > > 372                 return -EIO;
> > > > > 373         }
> > 
> > Sorry i misunderstood that. You are absolutly right, thats the best
> > solution for that. Remove the pch_err at getack so that only the pch_dbg
> > get printed where getack is called. This should be enough information.
> 
> No problem ;-)

If this is the approach taken, please coalesce the format.
As is there's a missing space between address and setting.
This should be:

		pch_dbg(adap, "Received NACK for slave address setting\n");


--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux