From: Duncan Laurie <dlaurie@xxxxxxxxxxxx>
Add the necessary PCI Device IDs to use the Haswell ULT
I2C controller in PCI mode.
Set the bus numbers to -1 so it will use dynamic assignment
rather than hardcoded.
Signed-off-by: Duncan Laurie <dlaurie@xxxxxxxxxxxx>
Signed-off-by: Benson Leung <bleung@xxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-designware-pcidrv.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index f6ed06c..e4cbbdf 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -54,6 +54,9 @@ enum dw_pci_ctl_id_t {
medfield_3,
medfield_4,
medfield_5,
+
+ haswell_0,
+ haswell_1,
};
struct dw_pci_controller {
@@ -132,6 +135,20 @@ static struct dw_pci_controller dw_pci_controllers[] = {
.rx_fifo_depth = 32,
.clk_khz = 25000,
},
+ [haswell_0] = {
+ .bus_num = -1,
+ .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_STD,
+ .tx_fifo_depth = 32,
+ .rx_fifo_depth = 32,
+ .clk_khz = 25000,
+ },
+ [haswell_1] = {
+ .bus_num = -1,
+ .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_STD,
+ .tx_fifo_depth = 32,
+ .rx_fifo_depth = 32,
+ .clk_khz = 25000,
+ },
};
static struct i2c_algorithm i2c_dw_algo = {
.master_xfer = i2c_dw_xfer,
@@ -321,6 +338,9 @@ static DEFINE_PCI_DEVICE_TABLE(i2_designware_pci_ids) = {
{ PCI_VDEVICE(INTEL, 0x082C), medfield_0 },
{ PCI_VDEVICE(INTEL, 0x082D), medfield_1 },
{ PCI_VDEVICE(INTEL, 0x082E), medfield_2 },
+ /* Haswell ULT */
+ { PCI_VDEVICE(INTEL, 0x9c61), haswell_0 },
+ { PCI_VDEVICE(INTEL, 0x9c62), haswell_1 },
{ 0,}
};
MODULE_DEVICE_TABLE(pci, i2_designware_pci_ids);
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
