On 17/10/13 15:19, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 10:33 Thu 17 Oct , srinivas kandagatla wrote:
>> On 17/10/13 08:27, Maxime COQUELIN wrote:
>>> ...
>>>>>>> +
>>>>>>> +static struct of_device_id st_i2c_match[] = {
>>>>>>> + { .compatible = "st,comms-ssc-i2c", },
>>>>> the rules is to put the first soc that use the ip in the compatible
>>>>> as st,sti7100-scc-i2c
>>> Ok. There are no plans to upstream the SH4 platforms, it will only
>>> remains in stlinux.com.
>>> Maybe I can set the first ARM platform (STiH415)?
>>> That would give st,stih415-ssc-i2c.
>> NAK, for st,stih415-ssc-i2c naming.
>>
>> IMO, this makes sense when the same IP integration done on different SOC
>> changes slightly/very differently.
>>
>> But in this case the "comms" IP remains unchanged across all the SOCs.
>>
>> I would still prefer "st,comms-ssc-i2c", allowing a single device driver
>> to match against several SoCs. ST "comms" IP it is integrated across all
>> the STi series of SoCs, so we don't want to add new entry in compatible
>> for every new SOC.
>
> you never need this you always the first SoC that's all
Sorry to ask this but, Where is this requirement coming from?
I have not spotted any thing as such in ePAPR specs.
All the spec says is.
===
The compatible property value consists of one or more strings that
define the specific programming model for the device. This list of
strings should be used by a client program for device driver selection.
The property value consists of a concatenated list of null terminated
strings, *from most specific to most general.* They allow a device to
express its compatibility with a family of similar devices, potentially
allowing a single device driver to match against several devices.
The recommended format is “manufacturer,model”, where manufacturer is a
string describing the name of the manufacturer (such as an OUI), and
model specifies the model number.
Example:
compatible = “fsl,mpc8641-uart”, “ns16550";
In this example, an operating system would first try to locate a device
driver that supported fsl,mpc8641-uart. If a driver was not found, it
would then try to locate a driver that supported the more general
ns16550 device type.
===
The more general compatible string in this case is "st,comms-ssc-i2c",
rather than the first soc name.
How can a first SOC name be more general?
As this driver is not very specific to StiH415, it is generic driver for
ST comms-ssc-i2c block.
Thanks,
srini
>
> see other bindings on at91 as example sorry NACK
>
> Best Regards,
> J.
>>
>>
>> Thanks,
>> srini
>>
>>>
>>> Thanks for the review,
>>> Maxime
>>>
>>>>>
>>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
