Hi Wolfram, On 10/14/2013 02:46 PM, Maxime COQUELIN wrote: > The goal of this series is to add I2C support to ST SoCs. > The DT definition is added for STiH415 and STiH416 SoCs on > B2000 and B2020 boards. > > The series has been tested working on STiH416-B2020 board. > It applies on top of v3.12-rc5. > > Changes since v4: > - Fixed IRQ flags to level high triggering as reported by Stephen Gallimore > - Revert back to generic DT properties for Anti-glitch filtering. Their DT > binding documentation will be updated when i2c DT binding docuementation > will be created (In Wolfram's ToDo list) Do you agree with this approach? Did you had time to review the driver? Regards, Maxime > ... > > Maxime Coquelin (4): > i2c: busses: i2c-st: Add ST I2C controller > ARM: STi: Supply I2C configuration to STiH416 SoC > ARM: STi: Supply I2C configuration to STiH415 SoC > ARM: STi: Add I2C config to B2000 and B2020 boards > > Documentation/devicetree/bindings/i2c/i2c-st.txt | 38 + > arch/arm/boot/dts/stih415-pinctrl.dtsi | 36 + > arch/arm/boot/dts/stih415.dtsi | 53 ++ > arch/arm/boot/dts/stih416-pinctrl.dtsi | 35 + > arch/arm/boot/dts/stih416.dtsi | 53 ++ > arch/arm/boot/dts/stih41x-b2000.dtsi | 9 + > arch/arm/boot/dts/stih41x-b2020.dtsi | 22 + > drivers/i2c/busses/Kconfig | 10 + > drivers/i2c/busses/Makefile | 1 + > drivers/i2c/busses/i2c-st.c | 867 ++++++++++++++++++++++ > 10 files changed, 1124 insertions(+) > create mode 100644 Documentation/devicetree/bindings/i2c/i2c-st.txt > create mode 100644 drivers/i2c/busses/i2c-st.c > -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
