On 25 January 2013 15:17, Viresh Kumar <viresh.kumar@xxxxxxxxxx> wrote: > Add i2c bus recovery infrastructure to i2c adapters as specified in the i2c > protocol Rev. 03 section 3.1.16 titled "Bus clear". > > http://www.nxp.com/documents/user_manual/UM10204.pdf > > Sometimes during operation i2c bus hangs and we need to give dummy clocks to > slave device to start the transfer again. Now we may have capability in the bus > controller to generate these clocks or platform may have gpio pins which can be > toggled to generate dummy clocks. This patch supports both. > > This patch also adds in generic bus recovery routines gpio or SCL line based > which can be used by bus controller. In addition controller driver may provide > its own version of the bus recovery routine. ARM mail servers are still broken. Please apply attached patches.
Attachment:
0001-i2c-adapter-Add-bus-recovery-infrastructure.patch
Description: Binary data
Attachment:
0002-i2c-designware-Provide-i2c-bus-recovery-support.patch
Description: Binary data
