[PATCH v2 3/6] Bugfix: behavior after collision

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Datasheet on collision:
	SMBus Collision (SMBCOL_STS)
	This bit is set when a SMBus Collision condition occurs and
	SMBus Host loses in the bus arbitration. The software should
	clear this bit and re-start SMBus operation.

As the status will be cleared in transaction_end, we can remove the
sis630_write and prepare to return -EAGAIN to retry.

Signed-off-by: Amaury Decrême <amaury.decreme@xxxxxxxxx>
---
 drivers/i2c/busses/i2c-sis630.c |    7 +------
 1 files changed, 1 insertions(+), 6 deletions(-)

diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c
index 3124d80..e152d36 100644
--- a/drivers/i2c/busses/i2c-sis630.c
+++ b/drivers/i2c/busses/i2c-sis630.c
@@ -200,12 +200,7 @@ static int sis630_transaction_wait(struct i2c_adapter *adap, int size)
 
 	if (temp & 0x04) {
 		dev_err(&adap->dev, "Bus collision!\n");
-		result = -EIO;
-		/*
-		  TBD: Datasheet say:
-		  the software should clear this bit and restart SMBUS operation.
-		  Should we do it or user start request again?
-		*/
+		result = -EAGAIN;
 	}
 
 	return result;
-- 
1.7.8.6

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux