Signed-off-by: Amaury Decrême <amaury.decreme@xxxxxxxxx> --- Documentation/i2c/busses/i2c-sis630 | 9 ++++ drivers/i2c/busses/Kconfig | 4 +- drivers/i2c/busses/i2c-sis630.c | 88 +++++++++++++++++++++++------------ 3 files changed, 69 insertions(+), 32 deletions(-) diff --git a/Documentation/i2c/busses/i2c-sis630 b/Documentation/i2c/busses/i2c-sis630 index 0b96973..ee79436 100644 --- a/Documentation/i2c/busses/i2c-sis630 +++ b/Documentation/i2c/busses/i2c-sis630 @@ -4,9 +4,11 @@ Supported adapters: * Silicon Integrated Systems Corp (SiS) 630 chipset (Datasheet: available at http://www.sfr-fresh.com/linux) 730 chipset + 964 chipset * Possible other SiS chipsets ? Author: Alexander Malysh <amalysh@xxxxxx> + Amaury Decrême <amaury.decreme@xxxxxxxxx> - SiS964 support Module Parameters ----------------- @@ -18,6 +20,7 @@ Module Parameters * high_clock = [1|0] Forcibly set Host Master Clock to 56KHz (default, what your BIOS use). DANGEROUS! This should be a bit faster, but freeze some systems (i.e. my Laptop). + SIS630/730 chip only. Description @@ -36,6 +39,12 @@ or like this: 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 730 Host (rev 02) 00:01.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 +or like this: + +00:00.0 Host bridge: Silicon Integrated Systems [SiS] 760/M760 Host (rev 02) +00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS964 [MuTIOL Media IO] + LPC Controller (rev 36) + in your 'lspci' output , then this driver is for your chipset. Thank You diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index bdca511..69a59a5 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -186,11 +186,11 @@ config I2C_SIS5595 will be called i2c-sis5595. config I2C_SIS630 - tristate "SiS 630/730" + tristate "SiS 630/730/964" depends on PCI help If you say yes to this option, support will be included for the - SiS630 and SiS730 SMBus (a subset of I2C) interface. + SiS630, SiS730 and SiS964 SMBus (a subset of I2C) interface. This driver can also be built as a module. If so, the module will be called i2c-sis630. diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c index de6dddb..df8e20a 100644 --- a/drivers/i2c/busses/i2c-sis630.c +++ b/drivers/i2c/busses/i2c-sis630.c @@ -41,6 +41,20 @@ Supports: SIS 630 SIS 730 + SIS 964 + + Notable differences between chips: + +------------------------+--------------------+-------------------+ + | | SIS630/730 | SIS964 | + +------------------------+--------------------+-------------------+ + | Clock | 14kHz/56kHz | 55.56kHz/27.78kHz | + | SMBus registers offset | 0x80 | 0xE0 | + | SMB_CNT | Bit 1 = Slave Busy | Bit 1 = Bus probe | + | (not used yet) | Bit 3 is reserved | Bit 3 = Last byte | + | SMB_PCOUNT | Offset + 0x06 | Offset + 0x14 | + | SMB_COUNT | 4:0 bits | 5:0 bits | + +------------------------+--------------------+-------------------+ + (Other differences don't affect the functions provided by the driver) Note: we assume there can only be one device, with one SMBus interface. */ @@ -55,22 +69,21 @@ #include <linux/acpi.h> #include <linux/io.h> -/* SIS630 SMBus registers */ -#define SMB_STS 0x80 /* status */ -#define SMB_EN 0x81 /* status enable */ -#define SMB_CNT 0x82 -#define SMBHOST_CNT 0x83 -#define SMB_ADDR 0x84 -#define SMB_CMD 0x85 -#define SMB_PCOUNT 0x86 /* processed count */ -#define SMB_COUNT 0x87 -#define SMB_BYTE 0x88 /* ~0x8F data byte field */ -#define SMBDEV_ADDR 0x90 -#define SMB_DB0 0x91 -#define SMB_DB1 0x92 -#define SMB_SAA 0x93 - -/* register count for request_region */ +/* SIS964 id is defined here as we are the only file using it */ +#define PCI_DEVICE_ID_SI_964 0x0964 + +/* SIS630/730/964 SMBus registers */ +#define SMB_STS 0x00 /* status */ +#define SMB_CNT 0x02 /* control */ +#define SMBHOST_CNT 0x03 /* host control */ +#define SMB_ADDR 0x04 /* address */ +#define SMB_CMD 0x05 /* command */ +#define SMB_COUNT 0x07 /* byte count */ +#define SMB_BYTE 0x08 /* ~0x8F data byte field */ + +/* register count for request_region + * As we don't use SMB_PCOUNT, 20 is ok for SiS630 and SiS964 + */ #define SIS630_SMB_IOREGION 20 /* PCI address constants */ @@ -96,28 +109,30 @@ static struct pci_driver sis630_driver; static bool high_clock; static bool force; module_param(high_clock, bool, 0); -MODULE_PARM_DESC(high_clock, "Set Host Master Clock to 56KHz (default 14KHz)."); +MODULE_PARM_DESC(high_clock, + "Set Host Master Clock to 56KHz (default 14KHz) (SIS630/730 only)."); module_param(force, bool, 0); MODULE_PARM_DESC(force, "Forcibly enable the SIS630. DANGEROUS!"); -/* acpi base address */ -static unsigned short acpi_base; +/* SMBus base adress */ +static unsigned short smbus_base; /* supported chips */ static int supported[] = { PCI_DEVICE_ID_SI_630, PCI_DEVICE_ID_SI_730, + PCI_DEVICE_ID_SI_760, 0 /* terminates the list */ }; static inline u8 sis630_read(u8 reg) { - return inb(acpi_base + reg); + return inb(smbus_base + reg); } static inline void sis630_write(u8 reg, u8 data) { - outb(data, acpi_base + reg); + outb(data, smbus_base + reg); } static int sis630_transaction_start(struct i2c_adapter *adap, int size, u8 *oldclock) @@ -394,6 +409,8 @@ static int sis630_setup(struct pci_dev *sis630_dev) unsigned char b; struct pci_dev *dummy = NULL; int retval, i; + /* acpi base address */ + unsigned short acpi_base; /* check for supported SiS devices */ for (i=0; supported[i] > 0 ; i++) { @@ -438,16 +455,25 @@ static int sis630_setup(struct pci_dev *sis630_dev) dev_dbg(&sis630_dev->dev, "ACPI base at 0x%04x\n", acpi_base); - retval = acpi_check_region(acpi_base + SMB_STS, SIS630_SMB_IOREGION, + if (supported[i] == PCI_DEVICE_ID_SI_760) + smbus_base = acpi_base + 0xE0; + else + smbus_base = acpi_base + 0x80; + + dev_dbg(&sis630_dev->dev, "SMBus base at 0x%04hx\n", smbus_base); + + retval = acpi_check_region(smbus_base + SMB_STS, SIS630_SMB_IOREGION, sis630_driver.name); if (retval) goto exit; /* Everything is happy, let's grab the memory and set things up. */ - if (!request_region(acpi_base + SMB_STS, SIS630_SMB_IOREGION, + if (!request_region(smbus_base + SMB_STS, SIS630_SMB_IOREGION, sis630_driver.name)) { - dev_err(&sis630_dev->dev, "SMBus registers 0x%04x-0x%04x already " - "in use!\n", acpi_base + SMB_STS, acpi_base + SMB_SAA); + dev_err(&sis630_dev->dev, + "I/O Region 0x%04hx-0x%04hx for SMBus already in use.\n", + smbus_base + SMB_STS, + smbus_base + SMB_STS + SIS630_SMB_IOREGION - 1); retval = -EBUSY; goto exit; } @@ -456,7 +482,7 @@ static int sis630_setup(struct pci_dev *sis630_dev) exit: if (retval) - acpi_base = 0; + smbus_base = 0; return retval; } @@ -470,11 +496,13 @@ static struct i2c_adapter sis630_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, + .retries = 3 }; static DEFINE_PCI_DEVICE_TABLE(sis630_ids) = { { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503) }, { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC) }, + { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_964) }, { 0, } }; @@ -491,17 +519,17 @@ static int sis630_probe(struct pci_dev *dev, const struct pci_device_id *id) sis630_adapter.dev.parent = &dev->dev; snprintf(sis630_adapter.name, sizeof(sis630_adapter.name), - "SMBus SIS630 adapter at %04x", acpi_base + SMB_STS); + "SMBus SIS630 adapter at %04hx", smbus_base + SMB_STS); return i2c_add_adapter(&sis630_adapter); } static void sis630_remove(struct pci_dev *dev) { - if (acpi_base) { + if (smbus_base) { i2c_del_adapter(&sis630_adapter); - release_region(acpi_base + SMB_STS, SIS630_SMB_IOREGION); - acpi_base = 0; + release_region(smbus_base + SMB_STS, SIS630_SMB_IOREGION); + smbus_base = 0; } } -- 1.7.8.6 -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
