Re: [PATCH] i2c: omap: revert "i2c: omap: switch to threaded IRQ support"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Mon, Oct 15, 2012 at 01:51:08AM +0000, Paul Walmsley wrote:
> 
> Commit 3b2f8f82dad7d1f79cdc8fc05bd1c94baf109bde ("i2c: omap: switch to
> threaded IRQ support") causes communication with I2C devices to fail
> after system suspend/resume on all OMAP3 devices:
> 
> ...
> [   40.228576] PM: noirq resume of devices complete after 3.723 msecs
> [   40.233184] PM: early resume of devices complete after 3.173 msecs
> [   40.242736] [sched_delayed] sched: RT throttling activated
> [   41.235046] omap_i2c omap_i2c.1: controller timed out

instead of just reverting the patch, I'd rather try to figure out why
controller times out in that situation.

It should make no difference if you're running an IRQ thread or not.

Do you have any extra debugging information which might help figuring
out what the issue really is ?

If the thread is actually at fault, then we need to add IRQF_NO_THREAD
to the IRQ flags, otherwise same issue will appear if we boot with
"threadirqs" kernel parameter.

> [   41.235351] twl: i2c_read failed to transfer all messages
> [   41.235382] omap_hsmmc omap_hsmmc.0: could not set regulator OCR (-110)
> [   41.396453] mmc0: error -110 during resume (card was removed?)
> [   42.391754] omap_i2c omap_i2c.1: controller timed out
> [   42.391876] twl: i2c_write failed to transfer all messages
> [   42.391906] twl_rtc: Could not write TWLregister F - error -110
> [   43.391326] omap_i2c omap_i2c.1: controller timed out
> [   43.391479] twl: i2c_read failed to transfer all messages
> [   43.391510] twl_rtc: Could not read TWLregister D - error -110
> [   43.391540] twl_rtc twl_rtc: twl_rtc_read_time: reading CTRL_REG, error -110
> [   43.392364] PM: resume of devices complete after 3158.935 msecs
> 
> When the root filesystem is on MMC, as in the above example, the
> card's voltage regulator is not re-enabled and the filesystem becomes
> inaccessible after resume.

but it fails because I2C times out and I'd like to understand why,
before just reverting the patch.

> Fix by reverting the conversion to a threaded IRQ handler.
> 
> Signed-off-by: Paul Walmsley <paul@xxxxxxxxx>
> Cc: Felipe Balbi <balbi@xxxxxx>
> Cc: Shubhrajyoti D <shubhrajyoti@xxxxxx>
> Cc: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
> Cc: Ben Dooks <ben-linux@xxxxxxxxx>
> ---
>  drivers/i2c/busses/i2c-omap.c |   44 +++++++----------------------------------
>  1 file changed, 7 insertions(+), 37 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
> index db31eae..e001c2a 100644
> --- a/drivers/i2c/busses/i2c-omap.c
> +++ b/drivers/i2c/busses/i2c-omap.c
> @@ -180,7 +180,6 @@ enum {
>  #define I2C_OMAP_ERRATA_I462		(1 << 1)
>  
>  struct omap_i2c_dev {
> -	spinlock_t		lock;		/* IRQ synchronization */
>  	struct device		*dev;
>  	void __iomem		*base;		/* virtual */
>  	int			irq;
> @@ -865,35 +864,13 @@ static int omap_i2c_transmit_data(struct omap_i2c_dev *dev, u8 num_bytes,
>  }
>  
>  static irqreturn_t
> -omap_i2c_isr(int irq, void *dev_id)
> +omap_i2c_isr(int this_irq, void *dev_id)
>  {
>  	struct omap_i2c_dev *dev = dev_id;
> -	irqreturn_t ret = IRQ_HANDLED;
> -	u16 mask;
> -	u16 stat;
> -
> -	spin_lock(&dev->lock);
> -	mask = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
> -	stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG);
> -
> -	if (stat & mask)
> -		ret = IRQ_WAKE_THREAD;
> -
> -	spin_unlock(&dev->lock);
> -
> -	return ret;
> -}
> -
> -static irqreturn_t
> -omap_i2c_isr_thread(int this_irq, void *dev_id)
> -{
> -	struct omap_i2c_dev *dev = dev_id;
> -	unsigned long flags;
>  	u16 bits;
>  	u16 stat;
>  	int err = 0, count = 0;
>  
> -	spin_lock_irqsave(&dev->lock, flags);
>  	do {
>  		bits = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
>  		stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG);
> @@ -907,7 +884,7 @@ omap_i2c_isr_thread(int this_irq, void *dev_id)
>  
>  		if (!stat) {
>  			/* my work here is done */
> -			goto out;
> +			return IRQ_HANDLED;
>  		}
>  
>  		dev_dbg(dev->dev, "IRQ (ISR = 0x%04x)\n", stat);
> @@ -1016,8 +993,6 @@ omap_i2c_isr_thread(int this_irq, void *dev_id)
>  	omap_i2c_complete_cmd(dev, err);
>  
>  out:
> -	spin_unlock_irqrestore(&dev->lock, flags);
> -
>  	return IRQ_HANDLED;
>  }
>  
> @@ -1062,6 +1037,7 @@ omap_i2c_probe(struct platform_device *pdev)
>  		pdev->dev.platform_data;
>  	struct device_node	*node = pdev->dev.of_node;
>  	const struct of_device_id *match;
> +	irq_handler_t isr;
>  	int irq;
>  	int r;
>  
> @@ -1110,8 +1086,6 @@ omap_i2c_probe(struct platform_device *pdev)
>  	dev->dev = &pdev->dev;
>  	dev->irq = irq;
>  
> -	spin_lock_init(&dev->lock);
> -
>  	platform_set_drvdata(pdev, dev);
>  	init_completion(&dev->cmd_complete);
>  
> @@ -1166,14 +1140,10 @@ omap_i2c_probe(struct platform_device *pdev)
>  	/* reset ASAP, clearing any IRQs */
>  	omap_i2c_init(dev);
>  
> -	if (dev->rev < OMAP_I2C_OMAP1_REV_2)
> -		r = devm_request_irq(&pdev->dev, dev->irq, omap_i2c_omap1_isr,
> -				IRQF_NO_SUSPEND, pdev->name, dev);
> -	else
> -		r = devm_request_threaded_irq(&pdev->dev, dev->irq,
> -				omap_i2c_isr, omap_i2c_isr_thread,
> -				IRQF_NO_SUSPEND | IRQF_ONESHOT,
> -				pdev->name, dev);
> +	isr = (dev->rev < OMAP_I2C_OMAP1_REV_2) ? omap_i2c_omap1_isr :
> +								   omap_i2c_isr;
> +	r = devm_request_irq(&pdev->dev, dev->irq, isr, IRQF_NO_SUSPEND,
> +			     pdev->name, dev);
>  
>  	if (r) {
>  		dev_err(dev->dev, "failure requesting irq %i\n", dev->irq);
> -- 
> 1.7.10.4

-- 
balbi

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux