+Kalle, Grygorii, Huzefa Shubhrajyoti D <shubhrajyoti@xxxxxx> writes: > Enable the irq in the transfer and disable it after the > transfer is done. > > Signed-off-by: Shubhrajyoti D <shubhrajyoti@xxxxxx> > --- > drivers/i2c/busses/i2c-omap.c | 3 +++ > 1 files changed, 3 insertions(+), 0 deletions(-) > > diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c > index b6c6b95..ce41596 100644 > --- a/drivers/i2c/busses/i2c-omap.c > +++ b/drivers/i2c/busses/i2c-omap.c > @@ -625,6 +625,7 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) > if (IS_ERR_VALUE(r)) > goto out; > > + enable_irq(dev->irq); > r = omap_i2c_wait_for_bb(dev); > if (r < 0) > goto out; > @@ -654,6 +655,7 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) > > omap_i2c_wait_for_bb(dev); > out: > + disable_irq(dev->irq); When using runtime PM with auto-suspend timeouts, why would you disable the IRQ before the runtime suspend handlers have run? If you really want to do this, you probably should have these in the runtime PM callbacks. But I'll wait until you add a more descriptive changelog before I can really tell why this is being done. Based on the discussion in the patch from Kalle, I'm assuming this is to prevent interrups when I2C is being used by co-processors. If so, plese describe in the changelog. That being said, doesn't the runtime suspend callback already disable IRQs at the device level instead of the INTC level? Kevin > pm_runtime_mark_last_busy(dev->dev); > pm_runtime_put_autosuspend(dev->dev); > return r; > @@ -1179,6 +1181,7 @@ omap_i2c_probe(struct platform_device *pdev) > goto err_unuse_clocks; > } > > + disable_irq(dev->irq); > adap = &dev->adapter; > i2c_set_adapdata(adap, dev); > adap->owner = THIS_MODULE; -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
