On 28 September 2012 16:58, Viresh Kumar <viresh.kumar@xxxxxxxxxx> wrote: > Add i2c bus recovery infrastructure to i2c adapters as specified in the i2c > protocol Rev. 03 section 3.1.16 titled "Bus clear". > > http://www.nxp.com/documents/user_manual/UM10204.pdf > > Sometimes during operation i2c bus hangs and we need to give dummy clocks to > slave device to start the transfer again. Now we may have capability in the bus > controller to generate these clocks or platform may have gpio pins which can be > toggled to generate dummy clocks. This patch supports both. > > This patch also adds in generic bus recovery routines gpio or scl line based > which can be used by bus controller. In addition controller driver may provide > its own version of the bus recovery routine. > > This doesn't support multi-master recovery for now. Hi Uwe, If you have gone through V5 and have no noticeable issues with it, can it have a reviewed-by: from you? -- viresh -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
