Re: [PATCH 1/9] ARM: Kirkwood: Add interrupt controller support for DT boards

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am Sonntag 10 Juni 2012, 12:31:53 schrieb Andrew Lunn:
> Signed-off-by: Andrew Lunn <andrew@xxxxxxx>
> ---
>  .../devicetree/bindings/arm/mrvl/intc.txt          |   20
> ++++++++++++++++++ arch/arm/boot/dts/kirkwood.dtsi                    |   
> 9 ++++++++ arch/arm/mach-kirkwood/board-dt.c                  |   22
> +++++++++++++++++++- 3 files changed, 50 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/arm/mrvl/intc.txt
> b/Documentation/devicetree/bindings/arm/mrvl/intc.txt index
> 80b9a94..612536e 100644
> --- a/Documentation/devicetree/bindings/arm/mrvl/intc.txt
> +++ b/Documentation/devicetree/bindings/arm/mrvl/intc.txt
> @@ -38,3 +38,23 @@ Example:
>  		reg-names = "mux status", "mux mask";
>  		mrvl,intc-nr-irqs = <2>;
>  	};
> +
> +* Marvell Orion Interrupt controller
> +
> +Required properties
> +- compatible :  Should be "marvell,orion-intc"
> +- #interrupt-cells: Specifies the number of cells needed to encode an
> +  interrupt source. Supported value is <1>
> +- interrupt-controller : So that its clear its an interrupt controller.
> +Optional properties
> +- reg : Not used yet, but will contain the interrupt mask address
> +
> +Example:
> +
> +	intc: interrupt-controller {
> +        	compatible = "marvell,orion-intc", "marvell,intc";
> +		interrupt-controller;
> +		#interrupt-cells = <1>;
> +                reg = <0xfed20204 0x04>,
> +		      <0xfed20214 0x04>;
> +        };

please fix whitespaces/tabs


> diff --git a/arch/arm/boot/dts/kirkwood.dtsi
> b/arch/arm/boot/dts/kirkwood.dtsi index 926528b..8eab7c4 100644
> --- a/arch/arm/boot/dts/kirkwood.dtsi
> +++ b/arch/arm/boot/dts/kirkwood.dtsi
> @@ -2,6 +2,15 @@
> 
>  / {
>  	compatible = "mrvl,kirkwood";
> +	interrupt-parent = <&intc>;
> +
> +	intc: interrupt-controller {
> +        	compatible = "marvell,orion-intc", "marvell,intc";
> +		interrupt-controller;
> +		#interrupt-cells = <1>;
> +                reg = <0xfed20204 0x04>,
> +		      <0xfed20214 0x04>;
> +        };

ditto

-- 
Michael
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux