On Sun, Jun 10, 2012 at 12:31:52PM +0200, Andrew Lunn wrote: > This patch set adds Device Tree support for IRQ, SPI, I2C and GPIO on > Orion based drivers, and makes use of these for kirkwood devices. It > also adds the ability to boot QNAP TS219 based systems using device > tree. Andrew, thanks for the patch series. At first glance, things look good. I'll let this sit on the mailinglist for a few days and try to test it early this week. thx, Jason. > The SPI DT patches are from Michael Walle, and have been previously > posted. I've addressed the issues raised during the review. > > The SPI refactor to use the SPI framework was submitted for merge into > 3.5, but due to dependency issues, which are now resolved, the patch > was not accepted. This patch has been modified to remove two NOP > functions, which the SPI framework no longer needs. > > Andrew Lunn (5): > ARM: Kirkwood: Add interrupt controller support for DT boards > SPI: Refactor spi-orion to use SPI framework queue. > I2C: MV64XXX: Add Device Tree support > ARM: Kirkwood: Add DT support for GPIO controllers > Kirkwood: Add basic device tree support for QNAP TS219. > > Michael Walle (4): > spi-orion: remove uneeded spi_info > spi-orion: add device tree binding > ARM: kirkwood: use devicetree for orion-spi > ARM: kirkwood: use devicetree for SPI on dreamplug > > .../devicetree/bindings/arm/mrvl/intc.txt | 20 ++ > .../devicetree/bindings/gpio/mrvl-gpio.txt | 25 +++ > Documentation/devicetree/bindings/i2c/mrvl-i2c.txt | 35 ++- > .../devicetree/bindings/spi/spi-orion.txt | 5 + > arch/arm/boot/dts/kirkwood-dreamplug.dts | 29 +++ > arch/arm/boot/dts/kirkwood-ts219-6281.dts | 21 ++ > arch/arm/boot/dts/kirkwood-ts219-6282.dts | 21 ++ > arch/arm/boot/dts/kirkwood-ts219.dtsi | 73 +++++++ > arch/arm/boot/dts/kirkwood.dtsi | 51 +++++ > arch/arm/mach-kirkwood/Kconfig | 15 ++ > arch/arm/mach-kirkwood/Makefile | 1 + > arch/arm/mach-kirkwood/Makefile.boot | 1 + > arch/arm/mach-kirkwood/board-dreamplug.c | 41 ---- > arch/arm/mach-kirkwood/board-dt.c | 36 +++- > arch/arm/mach-kirkwood/board-ts219.c | 86 ++++++++ > arch/arm/mach-kirkwood/common.h | 5 + > arch/arm/mach-kirkwood/irq.c | 20 +- > arch/arm/plat-orion/gpio.c | 68 +++++- > arch/arm/plat-orion/include/plat/gpio.h | 2 + > drivers/i2c/busses/i2c-mv64xxx.c | 38 +++- > drivers/spi/spi-orion.c | 223 ++++++-------------- > 21 files changed, 605 insertions(+), 211 deletions(-) > create mode 100644 Documentation/devicetree/bindings/spi/spi-orion.txt > create mode 100644 arch/arm/boot/dts/kirkwood-ts219-6281.dts > create mode 100644 arch/arm/boot/dts/kirkwood-ts219-6282.dts > create mode 100644 arch/arm/boot/dts/kirkwood-ts219.dtsi > create mode 100644 arch/arm/mach-kirkwood/board-ts219.c > > -- > 1.7.10 > -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
