On 30/05/12 18:45, Alessandro Rubini wrote:
The header and driver were only used by arm/mach-nomadik and
arm/mach-u8500. The STA2X11 I/O Hub exports on PCIe a number of
devices, including i2c-nomadik. This patch allows compilation of
the driver under x86.
Signed-off-by: Alessandro Rubini<rubini@xxxxxxxxx>
Acked-by: Giancarlo Asnaghi<giancarlo.asnaghi@xxxxxx>
-
-#endif /* __PLAT_I2C_H */
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index 5267ab9..09b7589 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -23,8 +23,7 @@
#include<linux/io.h>
#include<linux/regulator/consumer.h>
#include<linux/pm_runtime.h>
-
-#include<plat/i2c.h>
+#include<linux/i2c-nomadik.h>
#define DRIVER_NAME "nmk-i2c"
diff --git a/include/linux/i2c-nomadik.h b/include/linux/i2c-nomadik.h
new file mode 100644
index 0000000..9350fe9
--- /dev/null
+++ b/include/linux/i2c-nomadik.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ */
+#ifndef __LINUX_I2C_NOMADIK_H
+#define __LINUX_I2C_NOMADIK_H
+
+enum i2c_freq_mode {
+ I2C_FREQ_MODE_STANDARD, /* up to 100 Kb/s */
+ I2C_FREQ_MODE_FAST, /* up to 400 Kb/s */
+ I2C_FREQ_MODE_HIGH_SPEED, /* up to 3.4 Mb/s */
+ I2C_FREQ_MODE_FAST_PLUS, /* up to 1 Mb/s */
+};
+
+/**
+ * struct nmk_i2c_controller - client specific controller configuration
+ * @clk_freq: clock frequency for the operation mode
+ * @slsu: Slave data setup time in ns.
+ * The needed setup time for three modes of operation
+ * are 250ns, 100ns and 10ns respectively thus leading
+ * to the values of 14, 6, 2 for a 48 MHz i2c clk
+ * @tft: Tx FIFO Threshold in bytes
+ * @rft: Rx FIFO Threshold in bytes
+ * @timeout Slave response timeout(ms)
+ * @sm: speed mode
+ */
+struct nmk_i2c_controller {
+ unsigned long clk_freq;
+ unsigned short slsu;
+ unsigned char tft;
+ unsigned char rft;
+ int timeout;
+ enum i2c_freq_mode sm;
+};
+
+#endif /* __LINUX_I2C_NOMADIK_H */
How about moving it to include/linux/platform_data so that we're
not filling include/linux with a bunch of driver specific includes?
--
Ben Dooks http://www.codethink.co.uk/
Senior Engineer Codethink - Providing Genius
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
