On Thu, Apr 26, 2012 at 01:37:19PM +0100, Mark Brown wrote:
> Since there are uses for I2C_M_NOSTART which are much more sensible and
> standard than most of the protocol mangling functionality (the main one
> being gather writes to devices where something like a register address
> needs to be inserted before a block of data) create a new I2C_FUNC_NOSTART
> for this feature and update all the users to use it.
>
> In the case of regmap-i2c we remove the requirement for mangling as
> I2C_M_NOSTART is the only mangling feature which is being used.
>
> Signed-off-by: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
In general, I like it. One thing below:
> --- a/include/linux/i2c.h
> +++ b/include/linux/i2c.h
> @@ -540,7 +540,7 @@ struct i2c_msg {
> __u16 flags;
> #define I2C_M_TEN 0x0010 /* this is a ten bit chip address */
> #define I2C_M_RD 0x0001 /* read data, from slave to master */
> -#define I2C_M_NOSTART 0x4000 /* if I2C_FUNC_PROTOCOL_MANGLING */
> +#define I2C_M_NOSTART 0x4000 /* if I2C_FUNC_NOSTART */
> #define I2C_M_REV_DIR_ADDR 0x2000 /* if I2C_FUNC_PROTOCOL_MANGLING */
> #define I2C_M_IGNORE_NAK 0x1000 /* if I2C_FUNC_PROTOCOL_MANGLING */
> #define I2C_M_NO_RD_ACK 0x0800 /* if I2C_FUNC_PROTOCOL_MANGLING */
> @@ -568,6 +568,7 @@ struct i2c_msg {
> #define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000
> #define I2C_FUNC_SMBUS_READ_I2C_BLOCK 0x04000000 /* I2C-like block xfer */
> #define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK 0x08000000 /* w/ 1-byte reg. addr. */
> +#define I2C_FUNC_NOSTART 0x10000000 /* I2C_M_NOSTART */
In this file, the comment for MANGLING should be adapted, too. It says
currently:
#define I2C_FUNC_PROTOCOL_MANGLING 0x00000004 /* I2C_M_NOSTART etc. */
NOSTART is now out of MANGLING.
Also, I'd think the FUNC_NOSTART bit should be 0x08 and SMBUS_PEC 0x4000. This
will be more intuitive, probably?
Thanks,
Wolfram
--
Pengutronix e.K. | Wolfram Sang |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Attachment:
signature.asc
Description: Digital signature
