This patch implements DMA support into mxs-i2c. DMA transfers are now enabled by
default, though it is possible for example for debugging purposes, to disable
them via i2c->dma_mode.
Cc: Linux I2C <linux-i2c@xxxxxxxxxxxxxxx>
Cc: Detlev Zundel <dzu@xxxxxxx>
Cc: Fabio Estevam <festevam@xxxxxxxxx>
Cc: Stefano Babic <sbabic@xxxxxxx>
Cc: Wolfgang Denk <wd@xxxxxxx>
Cc: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
---
arch/arm/mach-mxs/devices/platform-mxs-i2c.c | 5 +
arch/arm/mach-mxs/include/mach/devices-common.h | 1 +
drivers/i2c/busses/i2c-mxs.c | 261 +++++++++++++++++++++--
3 files changed, 245 insertions(+), 22 deletions(-)
diff --git a/arch/arm/mach-mxs/devices/platform-mxs-i2c.c b/arch/arm/mach-mxs/devices/platform-mxs-i2c.c
index 79222ec..a94f308 100644
--- a/arch/arm/mach-mxs/devices/platform-mxs-i2c.c
+++ b/arch/arm/mach-mxs/devices/platform-mxs-i2c.c
@@ -14,6 +14,7 @@
{ \
.id = _id, \
.iobase = soc ## _I2C ## _id ## _BASE_ADDR, \
+ .dma = soc ## _DMA_I2C ## _id, \
.errirq = soc ## _INT_I2C ## _id ## _ERROR, \
.dmairq = soc ## _INT_I2C ## _id ## _DMA, \
}
@@ -37,6 +38,10 @@ struct platform_device *__init mxs_add_mxs_i2c(
.end = data->iobase + SZ_8K - 1,
.flags = IORESOURCE_MEM,
}, {
+ .start = data->dma,
+ .end = data->dma,
+ .flags = IORESOURCE_DMA,
+ }, {
.start = data->errirq,
.end = data->errirq,
.flags = IORESOURCE_IRQ,
diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h
index f2e3839..791d99c 100644
--- a/arch/arm/mach-mxs/include/mach/devices-common.h
+++ b/arch/arm/mach-mxs/include/mach/devices-common.h
@@ -80,6 +80,7 @@ mxs_add_gpmi_nand(const struct gpmi_nand_platform_data *pdata,
struct mxs_mxs_i2c_data {
int id;
resource_size_t iobase;
+ resource_size_t dma;
resource_size_t errirq;
resource_size_t dmairq;
};
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index 0d8e485..b364b8b 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -26,6 +26,9 @@
#include <linux/platform_device.h>
#include <linux/jiffies.h>
#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/fsl/mxs-dma.h>
#include <mach/common.h>
@@ -113,6 +116,16 @@ struct mxs_i2c_dev {
struct completion cmd_complete;
u32 cmd_err;
struct i2c_adapter adapter;
+
+ /* DMA support components */
+ bool dma_mode;
+ struct resource *dmares;
+ struct dma_chan *dmach;
+ struct mxs_dma_data dma_data;
+ uint32_t pio_data[2];
+ uint32_t addr_data;
+ struct scatterlist sg_io[2];
+ bool dma_read;
};
/*
@@ -129,7 +142,12 @@ static void mxs_i2c_reset(struct mxs_i2c_dev *i2c)
writel(0x0015000d, i2c->regs + MXS_I2C_TIMING2);
writel(MXS_I2C_IRQ_MASK << 8, i2c->regs + MXS_I2C_CTRL1_SET);
- writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE,
+
+ if (i2c->dma_mode)
+ writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE,
+ i2c->regs + MXS_I2C_QUEUECTRL_CLR);
+ else
+ writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE,
i2c->regs + MXS_I2C_QUEUECTRL_SET);
}
@@ -204,7 +222,7 @@ static int mxs_i2c_wait_for_data(struct mxs_i2c_dev *i2c)
static int mxs_i2c_finish_read(struct mxs_i2c_dev *i2c, u8 *buf, int len)
{
- u32 data;
+ u32 data = 0;
int i;
for (i = 0; i < len; i++) {
@@ -220,9 +238,155 @@ static int mxs_i2c_finish_read(struct mxs_i2c_dev *i2c, u8 *buf, int len)
return 0;
}
+static void mxs_i2c_dma_finish(struct mxs_i2c_dev *i2c)
+{
+ if (i2c->dma_read) {
+ dma_unmap_sg(i2c->dev, &i2c->sg_io[0], 1, DMA_TO_DEVICE);
+ dma_unmap_sg(i2c->dev, &i2c->sg_io[1], 1, DMA_FROM_DEVICE);
+ } else {
+ dma_unmap_sg(i2c->dev, i2c->sg_io, 2, DMA_TO_DEVICE);
+ }
+}
+
+static void mxs_i2c_dma_irq_callback(void *param)
+{
+ struct mxs_i2c_dev *i2c = param;
+
+ complete(&i2c->cmd_complete);
+ mxs_i2c_dma_finish(i2c);
+}
+
+static int mxs_i2c_dma_setup_xfer(struct i2c_adapter *adap,
+ struct i2c_msg *msg, uint32_t flags)
+{
+ struct dma_async_tx_descriptor *desc;
+ struct mxs_i2c_dev *i2c = i2c_get_adapdata(adap);
+
+ if (msg->flags & I2C_M_RD) {
+ i2c->dma_read = 1;
+ i2c->addr_data = (msg->addr << 1) | I2C_SMBUS_READ;
+
+ /*
+ * SELECT command.
+ */
+
+ /* Queue the PIO register write transfer. */
+ i2c->pio_data[0] = MXS_CMD_I2C_SELECT;
+ desc = dmaengine_prep_slave_sg(i2c->dmach,
+ (struct scatterlist *)&i2c->pio_data[0],
+ 1, DMA_TRANS_NONE, 0);
+ if (!desc) {
+ dev_err(i2c->dev,
+ "Failed to get PIO reg. write descriptor.\n");
+ goto select_init_pio_fail;
+ }
+
+ /* Queue the DMA data transfer. */
+ sg_init_one(&i2c->sg_io[0], &i2c->addr_data, 1);
+ dma_map_sg(i2c->dev, &i2c->sg_io[0], 1, DMA_TO_DEVICE);
+ desc = dmaengine_prep_slave_sg(i2c->dmach, &i2c->sg_io[0], 1,
+ DMA_MEM_TO_DEV,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc) {
+ dev_err(i2c->dev,
+ "Failed to get DMA data write descriptor.\n");
+ goto select_init_dma_fail;
+ }
+
+ /*
+ * READ command.
+ */
+
+ /* Queue the PIO register write transfer. */
+ i2c->pio_data[1] = flags | MXS_CMD_I2C_READ |
+ MXS_I2C_CTRL0_XFER_COUNT(msg->len);
+ desc = dmaengine_prep_slave_sg(i2c->dmach,
+ (struct scatterlist *)&i2c->pio_data[1],
+ 1, DMA_TRANS_NONE, DMA_PREP_INTERRUPT);
+ if (!desc) {
+ dev_err(i2c->dev,
+ "Failed to get PIO reg. write descriptor.\n");
+ goto select_init_dma_fail;
+ }
+
+ /* Queue the DMA data transfer. */
+ sg_init_one(&i2c->sg_io[1], msg->buf, msg->len);
+ dma_map_sg(i2c->dev, &i2c->sg_io[1], 1, DMA_FROM_DEVICE);
+ desc = dmaengine_prep_slave_sg(i2c->dmach, &i2c->sg_io[1], 1,
+ DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc) {
+ dev_err(i2c->dev,
+ "Failed to get DMA data write descriptor.\n");
+ goto read_init_dma_fail;
+ }
+ } else {
+ i2c->dma_read = 0;
+ i2c->addr_data = (msg->addr << 1) | I2C_SMBUS_WRITE;
+
+ /*
+ * WRITE command.
+ */
+
+ /* Queue the PIO register write transfer. */
+ i2c->pio_data[0] = flags | MXS_CMD_I2C_WRITE |
+ MXS_I2C_CTRL0_XFER_COUNT(msg->len + 1);
+ desc = dmaengine_prep_slave_sg(i2c->dmach,
+ (struct scatterlist *)&i2c->pio_data[0],
+ 1, DMA_TRANS_NONE, 0);
+ if (!desc) {
+ dev_err(i2c->dev,
+ "Failed to get PIO reg. write descriptor.\n");
+ goto write_init_pio_fail;
+ }
+
+ /* Queue the DMA data transfer. */
+ sg_init_table(i2c->sg_io, 2);
+ sg_set_buf(&i2c->sg_io[0], &i2c->addr_data, 1);
+ sg_set_buf(&i2c->sg_io[1], msg->buf, msg->len);
+ dma_map_sg(i2c->dev, i2c->sg_io, 2, DMA_TO_DEVICE);
+ desc = dmaengine_prep_slave_sg(i2c->dmach, i2c->sg_io, 2,
+ DMA_MEM_TO_DEV,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc) {
+ dev_err(i2c->dev,
+ "Failed to get DMA data write descriptor.\n");
+ goto write_init_dma_fail;
+ }
+ }
+
+ /*
+ * The last descriptor must have this callback,
+ * to finish the DMA transaction.
+ */
+ desc->callback = mxs_i2c_dma_irq_callback;
+ desc->callback_param = i2c;
+
+ /* Start the transfer. */
+ dmaengine_submit(desc);
+ dma_async_issue_pending(i2c->dmach);
+ return 0;
+
+/* Read failpath. */
+read_init_dma_fail:
+ dma_unmap_sg(i2c->dev, &i2c->sg_io[1], 1, DMA_FROM_DEVICE);
+select_init_dma_fail:
+ dma_unmap_sg(i2c->dev, &i2c->sg_io[0], 1, DMA_TO_DEVICE);
+select_init_pio_fail:
+ return 1;
+
+
+/* Write failpath. */
+write_init_dma_fail:
+ dma_unmap_sg(i2c->dev, i2c->sg_io, 2, DMA_TO_DEVICE);
+write_init_pio_fail:
+ return 1;
+}
+
/*
* Low level master read/write transaction.
*/
+
static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg,
int stop)
{
@@ -230,6 +394,8 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg,
int ret;
int flags;
+ flags = stop ? MXS_I2C_CTRL0_POST_SEND_STOP : 0;
+
dev_dbg(i2c->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n",
msg->addr, msg->len, msg->flags, stop);
@@ -238,23 +404,30 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg,
init_completion(&i2c->cmd_complete);
- flags = stop ? MXS_I2C_CTRL0_POST_SEND_STOP : 0;
-
- if (msg->flags & I2C_M_RD)
- mxs_i2c_pioq_setup_read(i2c, msg->addr, msg->len, flags);
- else
- mxs_i2c_pioq_setup_write(i2c, msg->addr, msg->buf, msg->len,
- flags);
+ if (i2c->dma_mode) {
+ ret = mxs_i2c_dma_setup_xfer(adap, msg, flags);
+ if (ret)
+ return -EINVAL;
+ } else {
+ if (msg->flags & I2C_M_RD) {
+ mxs_i2c_pioq_setup_read(i2c, msg->addr,
+ msg->len, flags);
+ } else {
+ mxs_i2c_pioq_setup_write(i2c, msg->addr, msg->buf,
+ msg->len, flags);
+ }
- writel(MXS_I2C_QUEUECTRL_QUEUE_RUN,
+ writel(MXS_I2C_QUEUECTRL_QUEUE_RUN,
i2c->regs + MXS_I2C_QUEUECTRL_SET);
+ }
ret = wait_for_completion_timeout(&i2c->cmd_complete,
msecs_to_jiffies(1000));
+
if (ret == 0)
goto timeout;
- if ((!i2c->cmd_err) && (msg->flags & I2C_M_RD)) {
+ if (!i2c->dma_mode && (!i2c->cmd_err) && (msg->flags & I2C_M_RD)) {
ret = mxs_i2c_finish_read(i2c, msg->buf, msg->len);
if (ret)
goto timeout;
@@ -269,7 +442,9 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg,
timeout:
dev_dbg(i2c->dev, "Timeout!\n");
+ mxs_i2c_dma_finish(i2c);
mxs_i2c_reset(i2c);
+
return -ETIMEDOUT;
}
@@ -312,11 +487,13 @@ static irqreturn_t mxs_i2c_isr(int this_irq, void *dev_id)
else
i2c->cmd_err = 0;
- is_last_cmd = (readl(i2c->regs + MXS_I2C_QUEUESTAT) &
- MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK) == 0;
+ if (!i2c->dma_mode) {
+ is_last_cmd = (readl(i2c->regs + MXS_I2C_QUEUESTAT) &
+ MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK) == 0;
- if (is_last_cmd || i2c->cmd_err)
- complete(&i2c->cmd_complete);
+ if (!i2c->dma_mode && (is_last_cmd || i2c->cmd_err))
+ complete(&i2c->cmd_complete);
+ }
writel(stat, i2c->regs + MXS_I2C_CTRL1_CLR);
@@ -328,21 +505,41 @@ static const struct i2c_algorithm mxs_i2c_algo = {
.functionality = mxs_i2c_func,
};
+static bool mxs_i2c_dma_filter(struct dma_chan *chan, void *param)
+{
+ struct mxs_i2c_dev *i2c = param;
+
+ if (!mxs_dma_is_apbx(chan))
+ return false;
+
+ if (chan->chan_id != i2c->dmares->start)
+ return false;
+
+ chan->private = &i2c->dma_data;
+
+ return true;
+}
+
static int __devinit mxs_i2c_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct mxs_i2c_dev *i2c;
struct i2c_adapter *adap;
- struct resource *res;
+ struct resource *res, *dmares;
resource_size_t res_size;
- int err, irq;
+ int err, irq, dmairq;
+ dma_cap_mask_t mask;
i2c = devm_kzalloc(dev, sizeof(struct mxs_i2c_dev), GFP_KERNEL);
if (!i2c)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
+ dmares = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+ irq = platform_get_irq(pdev, 0);
+ dmairq = platform_get_irq(pdev, 1);
+
+ if (!res || !dmares || irq < 0 || dmairq < 0)
return -ENOENT;
res_size = resource_size(res);
@@ -353,15 +550,32 @@ static int __devinit mxs_i2c_probe(struct platform_device *pdev)
if (!i2c->regs)
return -EBUSY;
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- return irq;
-
err = devm_request_irq(dev, irq, mxs_i2c_isr, 0, dev_name(dev), i2c);
if (err)
return err;
i2c->dev = dev;
+
+ /*
+ * The MXS I2C DMA mode is prefered and enabled by default.
+ * The PIO mode is still supported, but should be used only
+ * for debuging purposes etc.
+ */
+ i2c->dma_mode = 1;
+
+ /* Setup the DMA */
+ if (i2c->dma_mode) {
+ i2c->dmares = dmares;
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+ i2c->dma_data.chan_irq = dmairq;
+ i2c->dmach = dma_request_channel(mask, mxs_i2c_dma_filter, i2c);
+ if (!i2c->dmach) {
+ dev_err(dev, "Failed to request dma\n");
+ return -ENODEV;
+ }
+ }
+
platform_set_drvdata(pdev, i2c);
/* Do reset to enforce correct startup after pinmuxing */
@@ -394,6 +608,9 @@ static int __devexit mxs_i2c_remove(struct platform_device *pdev)
if (ret)
return -EBUSY;
+ if (i2c->dmach)
+ dma_release_channel(i2c->dmach);
+
writel(MXS_I2C_QUEUECTRL_QUEUE_RUN,
i2c->regs + MXS_I2C_QUEUECTRL_CLR);
writel(MXS_I2C_CTRL0_SFTRST, i2c->regs + MXS_I2C_CTRL0_SET);
--
1.7.10
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
