Signed-off-by: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
---
arch/arm/boot/dts/imx6q-sabrelite.dts | 2 ++
arch/arm/boot/dts/imx6q.dtsi | 16 ++++++++++++++++
drivers/i2c/busses/i2c-imx.c | 9 +++++++++
3 files changed, 27 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index 4663a4e..4e13293 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -50,6 +50,8 @@
i2c@021a0000 { /* I2C1 */
status = "okay";
clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_1>;
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 2ba32e7..fe8c80d 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -390,6 +390,22 @@
reg = <0x020e0000 0x4000>;
/* shared pinctrl settings */
+ i2c1 {
+ pinctrl_i2c1_1: i2c1grp-1 {
+ fsl,pins = "MX6Q_PAD_EIM_D21",
+ "MX6Q_PAD_EIM_D28";
+ fsl,hysteresis = <1>;
+ fsl,mux = <0x16 0x11>;
+ fsl,pull = <2>;
+ fsl,pue = <1>;
+ fsl,pke = <1>;
+ fsl,open-drain = <1>;
+ fsl,speed = <2>;
+ fsl,drive-strength = <6>;
+ fsl,slew-rate = <1>;
+ };
+ };
+
uart4 {
pinctrl_uart4_1: uart4grp-1 {
fsl,pins = "MX6Q_PAD_KEY_COL0",
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index dfb84b7..7a52067 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -48,6 +48,7 @@
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/slab.h>
+#include <linux/pinctrl/consumer.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_i2c.h>
@@ -470,6 +471,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
struct imx_i2c_struct *i2c_imx;
struct resource *res;
struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
+ struct pinctrl *pct;
void __iomem *base;
resource_size_t res_size;
int irq, bitrate;
@@ -520,6 +522,13 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
i2c_imx->base = base;
i2c_imx->res = res;
+ pct = devm_pinctrl_get_select_default(&pdev->dev);
+ if (IS_ERR(pct)) {
+ dev_err(&pdev->dev, "can't get/select pinctrl\n");
+ ret = PTR_ERR(pct);
+ goto fail3;
+ }
+
/* Get I2C clock */
i2c_imx->clk = clk_get(&pdev->dev, "i2c_clk");
if (IS_ERR(i2c_imx->clk)) {
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
