Re: [PATCHv8 04/18] I2C: OMAP: I2C register restore only if context is lost

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Kevin,
Thanks for your review,

On Tue, Apr 17, 2012 at 7:15 PM, Kevin Hilman <khilman@xxxxxx> wrote:
> Shubhrajyoti D <shubhrajyoti@xxxxxx> writes:
>
>>  Currently i2c register restore is done always.
>>  Adding conditional restore.
>>  The i2c register restore is done only if the context is lost.
>
> OK, minor comment below.
>
>>  Also remove the definition of SYSS_RESETDONE_MASK and use the
>>  one in omap_hwmod.h.
>
> The definition is removed, but I don't see any of the users removed.
> If the users were cleaned up earlier in the series, then the removal of
> this should be done with that, or as a separate patch.  I don't see why
> it belongs with this patch.

I have not removed the users actually the macro was redefined.
I have instead used the definition in omap_hwmod.h which gets added
when I include omap_device.h

Let me know if you prefer a  separate patch?

>
>> Signed-off-by: Shubhrajyoti D <shubhrajyoti@xxxxxx>
>> ---
>>  arch/arm/plat-omap/i2c.c      |    3 ++
>>  drivers/i2c/busses/i2c-omap.c |   52 ++++++++++++++++++++++++++--------------
>>  include/linux/i2c-omap.h      |    1 +
>>  3 files changed, 38 insertions(+), 18 deletions(-)
>>
>> diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
>> index db071bc..4ccab07 100644
>> --- a/arch/arm/plat-omap/i2c.c
>> +++ b/arch/arm/plat-omap/i2c.c
>> @@ -179,6 +179,9 @@ static inline int omap2_i2c_add_bus(int bus_id)
>>        */
>>       if (cpu_is_omap34xx())
>>               pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat;
>> +
>> +     pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count;
>> +
>>       pdev = omap_device_build(name, bus_id, oh, pdata,
>>                       sizeof(struct omap_i2c_bus_platform_data),
>>                       NULL, 0, 0);
>> diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
>> index a882558..45389db 100644
>> --- a/drivers/i2c/busses/i2c-omap.c
>> +++ b/drivers/i2c/busses/i2c-omap.c
>> @@ -43,6 +43,7 @@
>>  #include <linux/slab.h>
>>  #include <linux/i2c-omap.h>
>>  #include <linux/pm_runtime.h>
>> +#include <plat/omap_device.h>
>>
>>  /* I2C controller revisions */
>>  #define OMAP_I2C_OMAP1_REV_2         0x20
>> @@ -157,9 +158,6 @@ enum {
>>  #define OMAP_I2C_SYSTEST_SDA_I               (1 << 1)        /* SDA line sense in */
>>  #define OMAP_I2C_SYSTEST_SDA_O               (1 << 0)        /* SDA line drive out */
>>
>> -/* OCP_SYSSTATUS bit definitions */
>> -#define SYSS_RESETDONE_MASK          (1 << 0)
>> -
>>  /* OCP_SYSCONFIG bit definitions */
>>  #define SYSC_CLOCKACTIVITY_MASK              (0x3 << 8)
>>  #define SYSC_SIDLEMODE_MASK          (0x3 << 3)
>> @@ -184,6 +182,7 @@ struct omap_i2c_dev {
>>       u32                     latency;        /* maximum mpu wkup latency */
>>       void                    (*set_mpu_wkup_lat)(struct device *dev,
>>                                                   long latency);
>> +     int                     (*get_context_loss_count)(struct device *dev);
>>       u32                     speed;          /* Speed of bus in kHz */
>>       u32                     dtrev;          /* extra revision from DT */
>>       u32                     flags;
>> @@ -206,6 +205,7 @@ struct omap_i2c_dev {
>>       u16                     syscstate;
>>       u16                     westate;
>>       u16                     errata;
>> +     int                     dev_lost_count;
>>  };
>>
>>  static const u8 reg_map_ip_v1[] = {
>> @@ -1025,6 +1025,7 @@ omap_i2c_probe(struct platform_device *pdev)
>>               dev->speed = pdata->clkrate;
>>               dev->flags = pdata->flags;
>>               dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat;
>> +             dev->get_context_loss_count = pdata->get_context_loss_count;
>>               dev->dtrev = pdata->rev;
>>       }
>>
>> @@ -1151,12 +1152,32 @@ omap_i2c_remove(struct platform_device *pdev)
>>  }
>>
>>  #ifdef CONFIG_PM_RUNTIME
>> +static void omap_i2c_restore(struct omap_i2c_dev *dev)
>> +{
>> +     omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
>> +     omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, dev->pscstate);
>> +     omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, dev->scllstate);
>> +     omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG, dev->sclhstate);
>> +     omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, dev->bufstate);
>> +     omap_i2c_write_reg(dev, OMAP_I2C_WE_REG, dev->westate);
>> +     omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
>> +     /*
>> +      * Don't write to this register if the IE state is 0 as it can
>> +      * cause deadlock.
>> +      */
>> +     if (dev->iestate)
>> +             omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
>> +
>> +}
>>  static int omap_i2c_runtime_suspend(struct device *dev)
>>  {
>>       struct platform_device *pdev = to_platform_device(dev);
>>       struct omap_i2c_dev *_dev = platform_get_drvdata(pdev);
>>       u16 iv;
>>
>> +     if (_dev->get_context_loss_count)
>> +             _dev->dev_lost_count = _dev->get_context_loss_count(dev);
>> +
>>       _dev->iestate = omap_i2c_read_reg(_dev, OMAP_I2C_IE_REG);
>>       if (_dev->dtrev == OMAP_I2C_IP_VERSION_2)
>>               omap_i2c_write_reg(_dev, OMAP_I2C_IP_V2_IRQENABLE_CLR, 1);
>> @@ -1179,24 +1200,19 @@ static int omap_i2c_runtime_resume(struct device *dev)
>>  {
>>       struct platform_device *pdev = to_platform_device(dev);
>>       struct omap_i2c_dev *_dev = platform_get_drvdata(pdev);
>> +     int loss_cnt;
>>
>> -     if (_dev->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
>> -             omap_i2c_write_reg(_dev, OMAP_I2C_CON_REG, 0);
>> -             omap_i2c_write_reg(_dev, OMAP_I2C_PSC_REG, _dev->pscstate);
>> -             omap_i2c_write_reg(_dev, OMAP_I2C_SCLL_REG, _dev->scllstate);
>> -             omap_i2c_write_reg(_dev, OMAP_I2C_SCLH_REG, _dev->sclhstate);
>> -             omap_i2c_write_reg(_dev, OMAP_I2C_BUF_REG, _dev->bufstate);
>> -             omap_i2c_write_reg(_dev, OMAP_I2C_SYSC_REG, _dev->syscstate);
>> -             omap_i2c_write_reg(_dev, OMAP_I2C_WE_REG, _dev->westate);
>> -             omap_i2c_write_reg(_dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
>> +     if (_dev->get_context_loss_count) {
>> +             loss_cnt = _dev->get_context_loss_count(dev);
>> +             if (loss_cnt < 0)
>> +                     return loss_cnt;
>
> To avoid messing up driver state, upon error, you should probably
> restore context, not abort.
Agreed , will fix this.

>
>> +             if (_dev->dev_lost_count == loss_cnt && _dev->dev_lost_count)
>> +                     return 0;
>
> Why the non-zero check?

Actually the driver probe-->omap_i2c_init

here
<snip>
                dev->pscstate = psc;
                dev->scllstate = scll;
                dev->sclhstate = sclh;
                dev->bufstate = buf;
<snip>

variables are updated and the first write happens in the handler.

>
> Seems like all you need to check is if (_dev->dev_lost_count != loss_cnt).
>
> Kevin
>
>>       }
>>
>> -     /*
>> -      * Don't write to this register if the IE state is 0 as it can
>> -      * cause deadlock.
>> -      */
>> -     if (_dev->iestate)
>> -             omap_i2c_write_reg(_dev, OMAP_I2C_IE_REG, _dev->iestate);
>> +     if (_dev->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE)
>> +             omap_i2c_restore(_dev);
>>
>>       return 0;
>>  }
>> diff --git a/include/linux/i2c-omap.h b/include/linux/i2c-omap.h
>> index 92a0dc7..c76cbc0 100644
>> --- a/include/linux/i2c-omap.h
>> +++ b/include/linux/i2c-omap.h
>> @@ -35,6 +35,7 @@ struct omap_i2c_bus_platform_data {
>>       u32             rev;
>>       u32             flags;
>>       void            (*set_mpu_wkup_lat)(struct device *dev, long set);
>> +     int             (*get_context_loss_count)(struct device *dev);
>>  };
>>
>>  #endif
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux