[PATCH v4] I2C: add CSR SiRFprimaII on-chip I2C controllers driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Zhiwu Song <Zhiwu.Song@xxxxxxx>

SiRFprimaII is the latest generation application processor from CSR’s
multi-function SoC product family.
The SoC support codes are in arch/arm/mach-prima2 from Linux mainline
3.0.
There are two I2C controllers on primaII, features include:
* Two I2C controller modules are on chip
* RISC I/O bus read write register
* Up to 16 bytes data buffer for issuing commands and writing data
  at the same time
* Up to 16 commands, and receiving read data 16 bytes at a time
* Error INT report (ACK check)
* No-ACK bus protocols (SCCB bus protocols)

Signed-off-by: Zhiwu Song <Zhiwu.Song@xxxxxxx>
Signed-off-by: Xiangzhen Ye <Xiangzhen.Ye@xxxxxxx>
Signed-off-by: Yuping Luo <Yuping.Luo@xxxxxxx>
Signed-off-by: Barry Song <Baohua.Song@xxxxxxx>
---
 -v4:
 fix some minor issues pointed out by Shubhrajyoti Datta;
 move platform_driver.suspend/resume to dev_pm_ops;
 use Wolfram Sang's new devm_request_and_ioremap() api, refer to:
     https://lkml.org/lkml/2011/10/25/226

 drivers/i2c/busses/Kconfig    |    7 +
 drivers/i2c/busses/Makefile   |    1 +
 drivers/i2c/busses/i2c-sirf.c |  440 +++++++++++++++++++++++++++++++++++++++++
 drivers/i2c/busses/i2c-sirf.h |   61 ++++++
 4 files changed, 512 insertions(+), 0 deletions(-)
 create mode 100644 drivers/i2c/busses/i2c-sirf.c
 create mode 100644 drivers/i2c/busses/i2c-sirf.h

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index a3afac4..61c561b 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -618,6 +618,16 @@ config I2C_SH_MOBILE
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-sh_mobile.
 
+config I2C_SIRF
+	tristate "CSR SiRFprimaII I2C interface"
+	depends on ARCH_PRIMA2
+	help
+	  If you say yes to this option, support will be included for the
+	  CSR SiRFprimaII I2C interface.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-sirf.
+
 config I2C_SIMTEC
 	tristate "Simtec Generic I2C interface"
 	select I2C_ALGOBIT
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index fba6da6..c30db66 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -62,6 +62,7 @@ obj-$(CONFIG_I2C_S3C2410)	+= i2c-s3c2410.o
 obj-$(CONFIG_I2C_S6000)		+= i2c-s6000.o
 obj-$(CONFIG_I2C_SH7760)	+= i2c-sh7760.o
 obj-$(CONFIG_I2C_SH_MOBILE)	+= i2c-sh_mobile.o
+obj-$(CONFIG_I2C_SIRF)		+= i2c-sirf.o
 obj-$(CONFIG_I2C_SIMTEC)	+= i2c-simtec.o
 obj-$(CONFIG_I2C_STU300)	+= i2c-stu300.o
 obj-$(CONFIG_I2C_TEGRA)		+= i2c-tegra.o
diff --git a/drivers/i2c/busses/i2c-sirf.c b/drivers/i2c/busses/i2c-sirf.c
new file mode 100644
index 0000000..7a78a08
--- /dev/null
+++ b/drivers/i2c/busses/i2c-sirf.c
@@ -0,0 +1,440 @@
+/*
+ * I2C bus driver for CSR SiRFprimaII
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include "i2c-sirf.h"
+
+#define SIRFSOC_I2C_DEFAULT_SPEED  100000
+
+struct sirfsoc_i2c {
+	void __iomem *base;
+	struct clk *clk;
+	unsigned long speed;	/* I2C SCL frequency */
+	int irq;
+	u32 cmd_ptr;		/* Current position in CMD buffer */
+	u8 *buf;		/* Buffer passed by user */
+	u32 msg_len;		/* Message length */
+	u32 finished_len;	/* number of bytes read/written */
+	u32 read_cmd_len;	/* number of read cmd sent */
+	int msg_read;		/* 1 indicates a read message */
+	int err_status;		/* 1 indicates an error on bus */
+
+	u32 sda_delay;		/* For suspend/resume */
+	u32 clk_div;
+	int last;		/* Last message in transfer, STOP cmd can be sent */
+
+	struct completion done;	/* indicates completion of message transfer */
+	struct i2c_adapter *adapter;
+};
+
+static void i2c_sirfsoc_read_data(struct sirfsoc_i2c *siic)
+{
+	u32 data = 0;
+	int i = 0;
+
+	for (i = 0; i < siic->read_cmd_len; i++) {
+		if (!(i & 0x3))
+			data = readl(siic->base + SIRFSOC_I2C_DATA_BUF + i);
+		siic->buf[siic->finished_len++] =
+			(unsigned char)((data & SIRFSOC_I2C_DATA_MASK(i)) >>
+				SIRFSOC_I2C_DATA_SHIFT(i));
+
+		BUG_ON(siic->finished_len > siic->msg_len);
+	}
+}
+
+static void i2c_sirfsoc_queue_cmd(struct sirfsoc_i2c *siic)
+{
+	u32 regval;
+	int i = 0;
+
+	if (siic->msg_read) {
+		while (((siic->finished_len + i) < siic->msg_len)
+			&& (siic->cmd_ptr < SIRFSOC_I2C_CMD_BUF_MAX)) {
+			regval = SIRFSOC_I2C_READ | SIRFSOC_I2C_CMD_RP(0);
+			if (((siic->finished_len + i) ==
+					(siic->msg_len - 1)) && siic->last)
+				regval |= SIRFSOC_I2C_STOP | SIRFSOC_I2C_NACK;
+			writel(regval,
+				siic->base + SIRFSOC_I2C_CMD(siic->cmd_ptr++));
+			i++;
+		}
+
+		siic->read_cmd_len = i;
+	} else {
+		while ((siic->cmd_ptr < SIRFSOC_I2C_CMD_BUF_MAX - 1)
+			&& (siic->finished_len < siic->msg_len)) {
+			regval = SIRFSOC_I2C_WRITE | SIRFSOC_I2C_CMD_RP(0);
+			if ((siic->finished_len == (siic->msg_len - 1))
+				&& siic->last)
+				regval |= SIRFSOC_I2C_STOP;
+			writel(regval,
+				siic->base + SIRFSOC_I2C_CMD(siic->cmd_ptr++));
+			writel(siic->buf[siic->finished_len++],
+				siic->base + SIRFSOC_I2C_CMD(siic->cmd_ptr++));
+		}
+	}
+	siic->cmd_ptr = 0;
+
+	/* Trigger the transfer */
+	writel(SIRFSOC_I2C_START_CMD, siic->base + SIRFSOC_I2C_CMD_START);
+}
+
+static irqreturn_t i2c_sirfsoc_irq(int irq, void *dev_id)
+{
+	struct sirfsoc_i2c *siic = (struct sirfsoc_i2c *)dev_id;
+	u32 i2c_stat = readl(siic->base + SIRFSOC_I2C_STATUS);
+
+	if (i2c_stat & SIRFSOC_I2C_STAT_ERR) {
+		/* Error conditions */
+		siic->err_status = 1;
+		writel(SIRFSOC_I2C_STAT_ERR, siic->base + SIRFSOC_I2C_STATUS);
+
+		if (i2c_stat & SIRFSOC_I2C_STAT_NACK)
+			dev_err(&siic->adapter->dev, "ACK not received\n");
+		else
+			dev_err(&siic->adapter->dev, "I2C error\n");
+
+		complete(&siic->done);
+	} else if (i2c_stat & SIRFSOC_I2C_STAT_CMD_DONE) {
+		/* CMD buffer execution complete */
+		if (siic->msg_read)
+			i2c_sirfsoc_read_data(siic);
+		if (siic->finished_len == siic->msg_len)
+			complete(&siic->done);
+		else /* Fill a new CMD buffer for left data */
+			i2c_sirfsoc_queue_cmd(siic);
+
+		writel(SIRFSOC_I2C_STAT_CMD_DONE, siic->base + SIRFSOC_I2C_STATUS);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void i2c_sirfsoc_set_address(struct sirfsoc_i2c *siic,
+	struct i2c_msg *msg)
+{
+	unsigned char addr;
+	u32 regval = SIRFSOC_I2C_START | SIRFSOC_I2C_CMD_RP(0) | SIRFSOC_I2C_WRITE;
+
+	/* no data and last message -> add STOP */
+	if (siic->last && (msg->len == 0))
+		regval |= SIRFSOC_I2C_STOP;
+
+	writel(regval, siic->base + SIRFSOC_I2C_CMD(siic->cmd_ptr++));
+
+	addr = msg->addr << 1;	/* Generate address */
+	if (msg->flags & I2C_M_RD)
+		addr |= 1;
+	if (msg->flags & I2C_M_REV_DIR_ADDR)	/* Reverse direction bit */
+		addr ^= 1;
+
+	writel(addr, siic->base + SIRFSOC_I2C_CMD(siic->cmd_ptr++));
+}
+
+static int i2c_sirfsoc_xfer_msg(struct sirfsoc_i2c *siic, struct i2c_msg *msg)
+{
+	u32 regval = readl(siic->base + SIRFSOC_I2C_CTRL);
+	int timeout = (msg->len + 1) * 50;
+	int ret = 0;
+
+	i2c_sirfsoc_set_address(siic, msg);
+
+	writel(regval | SIRFSOC_I2C_CMD_DONE_EN | SIRFSOC_I2C_ERR_INT_EN,
+		siic->base + SIRFSOC_I2C_CTRL);
+	i2c_sirfsoc_queue_cmd(siic);
+
+	if (wait_for_completion_timeout(&siic->done, timeout) == 0) {
+		siic->err_status = 1;
+		dev_err(&siic->adapter->dev, "Transfer timeout\n");
+	}
+
+	writel(regval & ~(SIRFSOC_I2C_CMD_DONE_EN | SIRFSOC_I2C_ERR_INT_EN),
+		siic->base + SIRFSOC_I2C_CTRL);
+	writel(0, siic->base + SIRFSOC_I2C_CMD_START);
+
+	if (siic->err_status) {
+		writel(readl(siic->base + SIRFSOC_I2C_CTRL) | SIRFSOC_I2C_RESET,
+			siic->base + SIRFSOC_I2C_CTRL);
+		while (readl(siic->base + SIRFSOC_I2C_CTRL) & SIRFSOC_I2C_RESET)
+			cpu_relax();
+
+		ret = -EIO;
+	}
+
+	return ret;
+}
+
+static u32 i2c_sirfsoc_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static int i2c_sirfsoc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+	int num)
+{
+	struct sirfsoc_i2c *siic = adap->algo_data;
+	int i, ret;
+
+	clk_enable(siic->clk);
+
+	for (i = 0; i < num; i++) {
+		siic->buf = msgs[i].buf;
+		siic->msg_len = msgs[i].len;
+
+		if (msgs[i].flags & I2C_M_RD)
+			siic->msg_read = 1;
+		else
+			siic->msg_read = 0;
+
+		siic->err_status = 0;
+		siic->cmd_ptr = 0;
+		siic->finished_len = 0;
+		if (i == (num - 1))
+			siic->last = 1;
+		else
+			siic->last = 0;
+
+		ret = i2c_sirfsoc_xfer_msg(siic, &msgs[i]);
+		if (ret) {
+			clk_disable(siic->clk);
+			return ret;
+		}
+	}
+
+	clk_disable(siic->clk);
+	return num;
+}
+
+/* I2C algorithms associated with this master controller driver */
+static const struct i2c_algorithm i2c_sirfsoc_algo = {
+	.master_xfer = i2c_sirfsoc_xfer,
+	.functionality = i2c_sirfsoc_func,
+};
+
+static int __devinit i2c_sirfsoc_probe(struct platform_device *pdev)
+{
+	struct sirfsoc_i2c *siic;
+	struct i2c_adapter *new_adapter;
+	struct resource *mem_res;
+	struct clk *clk;
+	int ctrl_speed;
+
+	int err;
+	u32 regval;
+
+	clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		err = PTR_ERR(clk);
+		dev_err(&pdev->dev, "Clock get failed\n");
+		goto err_get_clk;
+	}
+
+	err = clk_prepare(clk);
+	if (err) {
+		dev_err(&pdev->dev, "Clock prepare failed\n");
+		goto  err_clk_prep;
+	}
+
+	err = clk_enable(clk);
+	if (err) {
+		dev_err(&pdev->dev, "Clock enable failed\n");
+		goto  err_clk_en;
+	}
+
+	ctrl_speed = clk_get_rate(clk);
+
+	new_adapter = devm_kzalloc(&pdev->dev, sizeof(*new_adapter), GFP_KERNEL);
+	if (!new_adapter) {
+		dev_err(&pdev->dev,
+			"Can't allocate new i2c adapter!\n");
+		err = -ENOMEM;
+		goto out;
+	}
+
+	siic = devm_kzalloc(&pdev->dev, sizeof(*siic), GFP_KERNEL);
+	if (!siic) {
+		dev_err(&pdev->dev, "Can't allocate driver data\n");
+		err = -ENOMEM;
+		goto out;
+	}
+	new_adapter->class = I2C_CLASS_HWMON | I2C_CLASS_DDC | I2C_CLASS_SPD;
+	siic->adapter = new_adapter;
+
+	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (mem_res == NULL) {
+		dev_err(&pdev->dev, "Unable to get MEM resource\n");
+		err = -EINVAL;
+		goto out;
+	}
+
+	siic->base = devm_request_and_ioremap(&pdev->dev, mem_res);
+	if (siic->base == NULL) {
+		dev_err(&pdev->dev, "IO remap failed!\n");
+		err = -ENOMEM;
+		goto out;
+	}
+
+	siic->irq = platform_get_irq(pdev, 0);
+	if (siic->irq < 0) {
+		err = -EINVAL;
+		goto out;
+	}
+	err = devm_request_irq(&pdev->dev, siic->irq, i2c_sirfsoc_irq, 0,
+		dev_name(&pdev->dev), siic);
+	if (err)
+		goto out;
+
+	new_adapter->algo = &i2c_sirfsoc_algo;
+	new_adapter->algo_data = siic;
+
+	new_adapter->dev.parent = &pdev->dev;
+	new_adapter->nr = pdev->id;
+
+	strlcpy(new_adapter->name, "sirfsoc-i2c", sizeof(new_adapter->name));
+
+	platform_set_drvdata(pdev, new_adapter);
+	init_completion(&siic->done);
+
+	/* Controller Initalisation */
+
+	writel(SIRFSOC_I2C_RESET, siic->base + SIRFSOC_I2C_CTRL);
+	while (readl(siic->base + SIRFSOC_I2C_CTRL) & SIRFSOC_I2C_RESET)
+		cpu_relax();
+	writel(SIRFSOC_I2C_CORE_EN | SIRFSOC_I2C_MASTER_MODE,
+		siic->base + SIRFSOC_I2C_CTRL);
+
+	siic->clk = clk;
+	siic->speed = SIRFSOC_I2C_DEFAULT_SPEED;
+	if (siic->speed < 100000)
+		regval =
+			(2 * ctrl_speed) / (2 * siic->speed * 11);
+	else
+		regval = ctrl_speed / (siic->speed * 5);
+
+	writel(regval, siic->base + SIRFSOC_I2C_CLK_CTRL);
+	if (regval > 0xFF)
+		writel(0xFF, siic->base + SIRFSOC_I2C_SDA_DELAY);
+	else
+		writel(regval, siic->base + SIRFSOC_I2C_SDA_DELAY);
+
+	err = i2c_add_numbered_adapter(new_adapter);
+	if (err < 0) {
+		dev_err(&pdev->dev, "Can't add new i2c adapter\n");
+		goto out;
+	}
+
+	clk_disable(clk);
+
+	dev_info(&pdev->dev, " I2C adapter ready to operate\n");
+
+	return 0;
+
+out:
+	clk_disable(clk);
+err_clk_en:
+	clk_unprepare(clk);
+err_clk_prep:
+	clk_put(clk);
+err_get_clk:
+	return err;
+}
+
+static int __devexit i2c_sirfsoc_remove(struct platform_device *pdev)
+{
+	struct i2c_adapter *adapter = platform_get_drvdata(pdev);
+	struct sirfsoc_i2c *siic = adapter->algo_data;
+
+	writel(SIRFSOC_I2C_RESET, siic->base + SIRFSOC_I2C_CTRL);
+	i2c_del_adapter(adapter);
+	clk_disable(siic->clk);
+	clk_unprepare(siic->clk);
+	clk_put(siic->clk);
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int i2c_sirfsoc_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct i2c_adapter *adapter = platform_get_drvdata(pdev);
+	struct sirfsoc_i2c *siic = adapter->algo_data;
+
+	clk_enable(siic->clk);
+	siic->sda_delay = readl(siic->base + SIRFSOC_I2C_SDA_DELAY);
+	siic->clk_div = readl(siic->base + SIRFSOC_I2C_CLK_CTRL);
+	clk_disable(siic->clk);
+	return 0;
+}
+
+static int i2c_sirfsoc_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct i2c_adapter *adapter = platform_get_drvdata(pdev);
+	struct sirfsoc_i2c *siic = adapter->algo_data;
+
+	clk_enable(siic->clk);
+	writel(SIRFSOC_I2C_RESET, siic->base + SIRFSOC_I2C_CTRL);
+	writel(SIRFSOC_I2C_CORE_EN | SIRFSOC_I2C_MASTER_MODE,
+		siic->base + SIRFSOC_I2C_CTRL);
+	writel(siic->clk_div, siic->base + SIRFSOC_I2C_CLK_CTRL);
+	writel(siic->sda_delay, siic->base + SIRFSOC_I2C_SDA_DELAY);
+	clk_disable(siic->clk);
+	return 0;
+}
+
+static const struct dev_pm_ops i2c_sirfsoc_pm_ops = {
+	.suspend = i2c_sirfsoc_suspend,
+	.resume = i2c_sirfsoc_resume,
+};
+#endif
+
+static const struct of_device_id sirfsoc_i2c_of_match[] __devinitconst = {
+	{ .compatible = "sirf,prima2-i2c", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, sirfsoc_i2c_of_match);
+
+static struct platform_driver i2c_sirfsoc_driver = {
+	.driver = {
+		.name = "sirfsoc_i2c",
+		.owner = THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm = &i2c_sirfsoc_pm_ops,
+#endif
+		.of_match_table = sirfsoc_i2c_of_match,
+	},
+	.probe = i2c_sirfsoc_probe,
+	.remove = __devexit_p(i2c_sirfsoc_remove),
+};
+
+static int __init i2c_sirfsoc_init(void)
+{
+	return platform_driver_register(&i2c_sirfsoc_driver);
+}
+arch_initcall(i2c_sirfsoc_init);
+
+static void __exit i2c_sirfsoc_exit(void)
+{
+	platform_driver_unregister(&i2c_sirfsoc_driver);
+}
+module_exit(i2c_sirfsoc_exit);
+
+MODULE_DESCRIPTION("SiRF SoC I2C master controller driver");
+MODULE_AUTHOR("Zhiwu Song <Zhiwu.Song@xxxxxxx>, "
+	"Xiangzhen Ye <Xiangzhen.Ye@xxxxxxx>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/i2c/busses/i2c-sirf.h b/drivers/i2c/busses/i2c-sirf.h
new file mode 100644
index 0000000..28f4ada
--- /dev/null
+++ b/drivers/i2c/busses/i2c-sirf.h
@@ -0,0 +1,61 @@
+/*
+ * I2C bus drivers for CSR SiRFprimaII
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#ifndef _SIRFSOC_I2C_BUS_H_
+#define _SIRFSOC_I2C_BUS_H_
+
+#include <linux/bitops.h>
+
+#define SIRFSOC_I2C_CLK_CTRL		0x00
+#define SIRFSOC_I2C_STATUS		0x0C
+#define SIRFSOC_I2C_CTRL		0x10
+#define SIRFSOC_I2C_IO_CTRL		0x14
+#define SIRFSOC_I2C_SDA_DELAY		0x18
+#define SIRFSOC_I2C_CMD_START		0x1C
+#define SIRFSOC_I2C_CMD_BUF		0x30
+#define SIRFSOC_I2C_DATA_BUF		0x80
+
+#define SIRFSOC_I2C_CMD_BUF_MAX		16
+#define SIRFSOC_I2C_DATA_BUF_MAX	16
+
+#define SIRFSOC_I2C_CMD(x)		(SIRFSOC_I2C_CMD_BUF + (x)*0x04)
+#define SIRFSOC_I2C_DATA_MASK(x)        (0xFF<<(((x)&3)*8))
+#define SIRFSOC_I2C_DATA_SHIFT(x)       (((x)&3)*8)
+
+#define SIRFSOC_I2C_DIV_MASK		(0xFFFF)
+
+/* I2C status flags */
+#define SIRFSOC_I2C_STAT_BUSY		BIT(0)
+#define SIRFSOC_I2C_STAT_TIP		BIT(1)
+#define SIRFSOC_I2C_STAT_NACK		BIT(2)
+#define SIRFSOC_I2C_STAT_TR_INT		BIT(4)
+#define SIRFSOC_I2C_STAT_STOP		BIT(6)
+#define SIRFSOC_I2C_STAT_CMD_DONE	BIT(8)
+#define SIRFSOC_I2C_STAT_ERR		BIT(9)
+#define SIRFSOC_I2C_CMD_INDEX		(0x1F<<16)
+
+/* I2C control flags */
+#define SIRFSOC_I2C_RESET		BIT(0)
+#define SIRFSOC_I2C_CORE_EN		BIT(1)
+#define SIRFSOC_I2C_MASTER_MODE		BIT(2)
+#define SIRFSOC_I2C_CMD_DONE_EN		BIT(11)
+#define SIRFSOC_I2C_ERR_INT_EN		BIT(12)
+
+#define SIRFSOC_I2C_SDA_DELAY_MASK	(0xFF)
+#define SIRFSOC_I2C_SCLF_FILTER		(3<<8)
+
+#define SIRFSOC_I2C_START_CMD		BIT(0)
+
+#define SIRFSOC_I2C_CMD_RP(x)		((x)&0x7)
+#define SIRFSOC_I2C_NACK		BIT(3)
+#define SIRFSOC_I2C_WRITE		BIT(4)
+#define SIRFSOC_I2C_READ		BIT(5)
+#define SIRFSOC_I2C_STOP		BIT(6)
+#define SIRFSOC_I2C_START		BIT(7)
+
+#endif
-- 
1.7.1



Member of the CSR plc group of companies. CSR plc registered in England and Wales, registered number 4187346, registered office Churchill House, Cambridge Business Park, Cowley Road, Cambridge, CB4 0WZ, United Kingdom
More information can be found at www.csr.com. Follow CSR on Twitter at http://twitter.com/CSR_PLC and read our blog at www.csr.com/blog
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux