Hi Dmitry, I've addressed your comments from previous revision. Please review and let me know if you have comments. Thanks, Mohan. On 4/13/2011 5:55 PM, Mohan Pallaka wrote: > From: Kyungmin Park <kyungmin.park@xxxxxxxxxxx> > > isa1200 chip can be used to generate vibrations to indicate > silent alerts, providing gaming haptic actions or vibrations > in response to touches. It can operate in two modes, pwm > generation and pwm input mode. Pwm generation mode requires > external clock and pwm input mode needs the pwm signal to be > given as input to the chip. > > This patch has been derived based on Kyungmin Park's haptic > framework patches at http://lkml.org/lkml/2009/10/7/50 . Park's > isa1200 driver registers to the haptic class, which is also > introduced as part of the same patch series, and userspace will > operate the vibrator through exported sysfs entries. This version > supports only pwm input mode. > > This derived patch converts the driver from haptic framework to > the Linux supported force feeback framework. It also supports the > chip operation in both pwm input and generation modes. > > Change-Id: If253c71e833e629431a35864e33824d8d6dadb35 > Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx> > Signed-off-by: Mohan Pallaka <mpallaka@xxxxxxxxxxxxxx> > --- > drivers/input/misc/Kconfig | 12 + > drivers/input/misc/Makefile | 1 + > drivers/input/misc/isa1200.c | 442 +++++++++++++++++++++++++++++++++++++++++ > include/linux/input/isa1200.h | 46 +++++ > 4 files changed, 501 insertions(+), 0 deletions(-) > create mode 100644 drivers/input/misc/isa1200.c > create mode 100644 include/linux/input/isa1200.h > > diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig > index f9cf088..9fd762d 100644 > --- a/drivers/input/misc/Kconfig > +++ b/drivers/input/misc/Kconfig > @@ -302,6 +302,18 @@ config HP_SDC_RTC > Say Y here if you want to support the built-in real time clock > of the HP SDC controller. > > +config INPUT_ISA1200 > + tristate "ISA1200 haptic support" > + depends on I2C > + select INPUT_FF_MEMLESS > + help > + ISA1200 is a high performance enhanced haptic chip. > + Say Y here if you want to support ISA1200 connected via I2C, > + and select N if you are unsure. > + > + To compile this driver as a module, choose M here: the > + module will be called isa1200. > + > config INPUT_PCF50633_PMU > tristate "PCF50633 PMU events" > depends on MFD_PCF50633 > diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile > index e3f7984..47f74f7 100644 > --- a/drivers/input/misc/Makefile > +++ b/drivers/input/misc/Makefile > @@ -23,6 +23,7 @@ obj-$(CONFIG_INPUT_CMA3000_I2C) += cma3000_d0x_i2c.o > obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o > obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o > obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o > +obj-$(CONFIG_INPUT_ISA1200) += isa1200.o > obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o > obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o > obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o > diff --git a/drivers/input/misc/isa1200.c b/drivers/input/misc/isa1200.c > new file mode 100644 > index 0000000..0f5448a > --- /dev/null > +++ b/drivers/input/misc/isa1200.c > @@ -0,0 +1,442 @@ > +/* > + * Copyright (C) 2009 Samsung Electronics > + * Kyungmin Park <kyungmin.park@xxxxxxxxxxx> > + * > + * Copyright (c) 2011, Code Aurora Forum. All rights reserved. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#define pr_fmt(fmt) "%s: " fmt, __func__ > + > +#include <linux/module.h> > +#include <linux/init.h> > +#include <linux/i2c.h> > +#include <linux/gpio.h> > +#include <linux/workqueue.h> > +#include <linux/delay.h> > +#include <linux/pwm.h> > +#include <linux/input.h> > +#include <linux/slab.h> > +#include <linux/pm.h> > +#include <linux/input/isa1200.h> > + > +#define ISA1200_HCTRL0 0x30 > +#define HCTRL0_MODE_CTRL_BIT (3) > +#define HCTRL0_OVERDRIVE_HIGH_BIT (5) > +#define HCTRL0_OVERDRIVE_EN_BIT (6) > +#define HCTRL0_HAP_EN (7) > +#define HCTRL0_RESET 0x01 > +#define HCTRL1_RESET 0x4B > + > +#define ISA1200_HCTRL1 0x31 > +#define HCTRL1_SMART_ENABLE_BIT (3) > +#define HCTRL1_ERM_BIT (5) > +#define HCTRL1_EXT_CLK_ENABLE_BIT (7) > + > +#define ISA1200_HCTRL5 0x35 > +#define HCTRL5_VIB_STRT 0xD5 > +#define HCTRL5_VIB_STOP 0x6B > + > +#define DIVIDER_128 (128) > +#define DIVIDER_1024 (1024) > +#define DIVIDE_SHIFTER_128 (7) > + > +#define FREQ_22400 (22400) > +#define FREQ_172600 (172600) > + > +#define POR_DELAY_USEC (250) > + > +struct isa1200_chip { > + const struct isa1200_platform_data *pdata; > + struct i2c_client *client; > + struct input_dev *input_device; > + struct pwm_device *pwm; > + unsigned int period_ns; > + unsigned int state; > + struct work_struct work; > +}; > + > +static void isa1200_vib_set(struct isa1200_chip *haptic, bool enable) > +{ > + int rc; > + > + if (enable) { > + if (haptic->pdata->mode_ctrl == PWM_INPUT_MODE) { > + rc = pwm_config(haptic->pwm, > + (haptic->period_ns * haptic->pdata->duty) / 100, > + haptic->period_ns); > + if (rc < 0) > + pr_err("pwm_config fail\n"); > + rc = pwm_enable(haptic->pwm); > + if (rc < 0) > + pr_err("pwm_enable fail\n"); > + } else if (haptic->pdata->mode_ctrl == PWM_GEN_MODE) { > + rc = i2c_smbus_write_byte_data(haptic->client, > + ISA1200_HCTRL5, > + HCTRL5_VIB_STRT); > + if (rc < 0) > + pr_err("start vibration fail\n"); > + } > + } else { > + if (haptic->pdata->mode_ctrl == PWM_INPUT_MODE) > + pwm_disable(haptic->pwm); > + else if (haptic->pdata->mode_ctrl == PWM_GEN_MODE) { > + rc = i2c_smbus_write_byte_data(haptic->client, > + ISA1200_HCTRL5, > + HCTRL5_VIB_STOP); > + if (rc < 0) > + pr_err("stop vibration fail\n"); > + } > + } > +} > + > +static int isa1200_setup(struct i2c_client *client) > +{ > + struct isa1200_chip *haptic = i2c_get_clientdata(client); > + int value, temp, rc; > + > + if (haptic->pdata->hap_en_gpio != haptic->pdata->hap_len_gpio) > + gpio_set_value_cansleep(haptic->pdata->hap_len_gpio, 1); > + > + gpio_set_value_cansleep(haptic->pdata->hap_en_gpio, 0); > + udelay(POR_DELAY_USEC); > + gpio_set_value_cansleep(haptic->pdata->hap_en_gpio, 1); > + > + value = (haptic->pdata->smart_en << HCTRL1_SMART_ENABLE_BIT) | > + (haptic->pdata->is_erm << HCTRL1_ERM_BIT) | > + (haptic->pdata->ext_clk_en << HCTRL1_EXT_CLK_ENABLE_BIT); > + > + rc = i2c_smbus_write_byte_data(client, ISA1200_HCTRL1, value); > + if (rc < 0) { > + pr_err("i2c write failure\n"); > + return rc; > + } > + > + if (haptic->pdata->mode_ctrl == PWM_GEN_MODE) { > + temp = haptic->pdata->pwm_fd.pwm_div; > + if (temp < DIVIDER_128 || temp > DIVIDER_1024 || > + temp % DIVIDER_128) { > + pr_err("Invalid divisor\n"); > + rc = -EINVAL; > + goto reset_hctrl1; > + } > + value = ((temp >> DIVIDE_SHIFTER_128) - 1); > + } else if (haptic->pdata->mode_ctrl == PWM_INPUT_MODE) { > + temp = haptic->pdata->pwm_fd.pwm_freq; > + if (temp < FREQ_22400 || temp > FREQ_172600 || > + temp % FREQ_22400) { > + pr_err("Invalid frequency\n"); > + rc = -EINVAL; > + goto reset_hctrl1; > + } > + value = ((temp / FREQ_22400) - 1); > + haptic->period_ns = NSEC_PER_SEC / temp; > + } > + value |= (haptic->pdata->mode_ctrl << HCTRL0_MODE_CTRL_BIT) | > + (haptic->pdata->overdrive_high << HCTRL0_OVERDRIVE_HIGH_BIT) | > + (haptic->pdata->overdrive_en << HCTRL0_OVERDRIVE_EN_BIT) | > + (haptic->pdata->chip_en << HCTRL0_HAP_EN); > + > + rc = i2c_smbus_write_byte_data(client, ISA1200_HCTRL0, value); > + if (rc < 0) { > + pr_err("i2c write failure\n"); > + goto reset_hctrl1; > + } > + > + return 0; > + > +reset_hctrl1: > + i2c_smbus_write_byte_data(client, ISA1200_HCTRL1, > + HCTRL1_RESET); > + return rc; > +} > + > +static void isa1200_worker(struct work_struct *work) > +{ > + struct isa1200_chip *haptic; > + > + haptic = container_of(work, struct isa1200_chip, work); > + isa1200_vib_set(haptic, !!haptic->state); > +} > + > +static int isa1200_play_effect(struct input_dev *dev, void *data, > + struct ff_effect *effect) > +{ > + struct isa1200_chip *haptic = input_get_drvdata(dev); > + > + /* support basic vibration */ > + haptic->state = effect->u.rumble.strong_magnitude >> 8; > + if (!haptic->state) > + haptic->state = effect->u.rumble.weak_magnitude >> 9; > + > + schedule_work(&haptic->work); > + return 0; > +} > + > +#ifdef CONFIG_PM_SLEEP > +static int isa1200_suspend(struct device *dev) > +{ > + struct isa1200_chip *haptic = dev_get_drvdata(dev); > + int rc; > + > + cancel_work_sync(&haptic->work); > + /* turn-off current vibration */ > + isa1200_vib_set(haptic, false); > + > + if (haptic->pdata->power_on) { > + rc = haptic->pdata->power_on(false); > + if (rc) { > + pr_err("power-down failed\n"); > + return rc; > + } > + } > + return 0; > +} > + > +static int isa1200_resume(struct device *dev) > +{ > + struct isa1200_chip *haptic = dev_get_drvdata(dev); > + int rc; > + > + if (haptic->pdata->power_on) { > + rc = haptic->pdata->power_on(true); > + if (rc) { > + pr_err("power-up failed\n"); > + return rc; > + } > + } > + > + isa1200_setup(haptic->client); > + return 0; > +} > +#else > +#define isa1200_suspend NULL > +#define isa1200_resume NULL > +#endif > + > +static int __devinit isa1200_probe(struct i2c_client *client, > + const struct i2c_device_id *id) > +{ > + struct isa1200_chip *haptic; > + int rc; > + > + if (!i2c_check_functionality(client->adapter, > + I2C_FUNC_SMBUS_BYTE_DATA)) { > + pr_err("i2c is not supported\n"); > + return -EIO; > + } > + > + if (!client->dev.platform_data) { > + pr_err("pdata is not avaiable\n"); > + return -EINVAL; > + } > + > + haptic = kzalloc(sizeof(struct isa1200_chip), GFP_KERNEL); > + if (!haptic) { > + pr_err("no memory\n"); > + return -ENOMEM; > + } > + > + haptic->pdata = client->dev.platform_data; > + haptic->client = client; > + > + i2c_set_clientdata(client, haptic); > + > + /* device setup */ > + if (haptic->pdata->dev_setup) { > + rc = haptic->pdata->dev_setup(true); > + if (rc < 0) { > + pr_err("setup failed!\n"); > + goto err_mem_alloc; > + } > + } > + > + /* power on */ > + if (haptic->pdata->power_on) { > + rc = haptic->pdata->power_on(true); > + if (rc < 0) { > + pr_err("power failed\n"); > + goto err_setup; > + } > + } > + > + /* request gpio */ > + rc = gpio_is_valid(haptic->pdata->hap_en_gpio); > + if (rc) { > + rc = gpio_request(haptic->pdata->hap_en_gpio, "haptic_gpio"); > + if (rc) { > + pr_err("gpio %d request failed\n", > + haptic->pdata->hap_en_gpio); > + goto err_power_on; > + } > + } else { > + pr_err("Invalid gpio %d\n", > + haptic->pdata->hap_en_gpio); > + goto err_power_on; > + } > + > + rc = gpio_direction_output(haptic->pdata->hap_en_gpio, 0); > + if (rc) { > + pr_err("gpio %d set direction failed\n", > + haptic->pdata->hap_en_gpio); > + goto err_hap_en_gpio_free; > + } > + > + if (haptic->pdata->hap_en_gpio != haptic->pdata->hap_len_gpio) { > + rc = gpio_request(haptic->pdata->hap_len_gpio, > + "haptic_len_gpio"); > + if (rc) { > + pr_err("gpio %d request failed\n", > + haptic->pdata->hap_len_gpio); > + goto err_hap_en_gpio_free; > + } > + } > + > + /* setup registers */ > + rc = isa1200_setup(haptic->client); > + if (rc < 0) { > + pr_err("setup fail %d\n", rc); > + goto err_ldo_en_gpio_free; > + } > + > + if (haptic->pdata->mode_ctrl == PWM_INPUT_MODE) { > + haptic->pwm = pwm_request(haptic->pdata->pwm_ch_id, > + haptic->client->driver->id_table->name); > + if (IS_ERR(haptic->pwm)) { > + pr_err("pwm request failed\n"); > + rc = PTR_ERR(haptic->pwm); > + goto err_reset_hctrl0; > + } > + } > + > + /* init workqeueue */ > + INIT_WORK(&haptic->work, isa1200_worker); > + > + haptic->input_device = input_allocate_device(); > + if (!haptic->input_device) { > + pr_err("input device alloc failed\n"); > + rc = -ENOMEM; > + goto err_pwm_free ; > + } > + > + input_set_drvdata(haptic->input_device, haptic); > + haptic->input_device->name = haptic->pdata->name ? : > + "isa1200-haptic-device"; > + > + haptic->input_device->dev.parent = &client->dev; > + haptic->input_device->id.bustype = BUS_I2C; > + > + input_set_capability(haptic->input_device, EV_FF, FF_RUMBLE); > + > + rc = input_ff_create_memless(haptic->input_device, NULL, > + isa1200_play_effect); > + if (rc < 0) { > + pr_err("unable to register with ff\n"); > + goto err_free_dev; > + } > + > + rc = input_register_device(haptic->input_device); > + if (rc < 0) { > + pr_err("unable to register input device\n"); > + goto err_ff_destroy; > + } > + return 0; > + > +err_ff_destroy: > + input_ff_destroy(haptic->input_device); > +err_free_dev: > + input_free_device(haptic->input_device); > +err_pwm_free: > + if (haptic->pdata->mode_ctrl == PWM_INPUT_MODE) > + pwm_free(haptic->pwm); > +err_reset_hctrl0: > + i2c_smbus_write_byte_data(haptic->client, ISA1200_HCTRL0, > + HCTRL0_RESET); > +err_ldo_en_gpio_free: > + if (haptic->pdata->hap_en_gpio != haptic->pdata->hap_len_gpio) > + gpio_free(haptic->pdata->hap_len_gpio); > +err_hap_en_gpio_free: > + gpio_free(haptic->pdata->hap_en_gpio); > +err_power_on: > + if (haptic->pdata->power_on) > + haptic->pdata->power_on(false); > +err_setup: > + if (haptic->pdata->dev_setup) > + haptic->pdata->dev_setup(false); > +err_mem_alloc: > + kfree(haptic); > + return rc; > +} > + > +static int __devexit isa1200_remove(struct i2c_client *client) > +{ > + struct isa1200_chip *haptic = i2c_get_clientdata(client); > + > + cancel_work_sync(&haptic->work); > + /* turn-off current vibration */ > + isa1200_vib_set(haptic, false); > + > + if (haptic->pdata->mode_ctrl == PWM_INPUT_MODE) > + pwm_free(haptic->pwm); > + > + if (haptic->pdata->hap_en_gpio != haptic->pdata->hap_len_gpio) > + gpio_free(haptic->pdata->hap_len_gpio); > + gpio_free(haptic->pdata->hap_en_gpio); > + > + /* reset hardware registers */ > + i2c_smbus_write_byte_data(haptic->client, ISA1200_HCTRL0, > + HCTRL0_RESET); > + i2c_smbus_write_byte_data(haptic->client, ISA1200_HCTRL1, > + HCTRL1_RESET); > + > + if (haptic->pdata->dev_setup) > + haptic->pdata->dev_setup(false); > + > + /* power-off the chip */ > + if (haptic->pdata->power_on) > + haptic->pdata->power_on(false); > + > + input_unregister_device(haptic->input_device); > + kfree(haptic); > + > + return 0; > +} > + > +static const struct i2c_device_id isa1200_id_table[] = { > + {"isa1200", 0}, > + { }, > +}; > +MODULE_DEVICE_TABLE(i2c, isa1200_id_table); > + > +static SIMPLE_DEV_PM_OPS(isa1200_pm_ops, isa1200_suspend, isa1200_resume); > + > +static struct i2c_driver isa1200_driver = { > + .driver = { > + .name = "isa1200", > + .owner = THIS_MODULE, > + .pm = &isa1200_pm_ops, > + }, > + .probe = isa1200_probe, > + .remove = __devexit_p(isa1200_remove), > + .id_table = isa1200_id_table, > +}; > + > +static int __init isa1200_init(void) > +{ > + return i2c_add_driver(&isa1200_driver); > +} > +module_init(isa1200_init); > + > +static void __exit isa1200_exit(void) > +{ > + i2c_del_driver(&isa1200_driver); > +} > +module_exit(isa1200_exit); > + > +MODULE_DESCRIPTION("isa1200 based vibrator chip driver"); > +MODULE_LICENSE("GPL v2"); > +MODULE_AUTHOR("Kyungmin Park <kyungmin.park@xxxxxxxxxxx>"); > +MODULE_AUTHOR("Mohan Pallaka <mpallaka@xxxxxxxxxxxxxx>"); > diff --git a/include/linux/input/isa1200.h b/include/linux/input/isa1200.h > new file mode 100644 > index 0000000..a1b43d5 > --- /dev/null > +++ b/include/linux/input/isa1200.h > @@ -0,0 +1,46 @@ > +/* > + * Copyright (C) 2009 Samsung Electronics > + * Kyungmin Park <kyungmin.park@xxxxxxxxxxx> > + * > + * Copyright (c) 2011, Code Aurora Forum. All rights reserved. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#ifndef __LINUX_ISA1200_H > +#define __LINUX_ISA1200_H > + > +enum mode_control { > + POWER_DOWN_MODE = 0, > + PWM_INPUT_MODE, > + PWM_GEN_MODE, > + WAVE_GEN_MODE > +}; > + > +union pwm_div_freq { > + unsigned int pwm_div; /* PWM gen mode */ > + unsigned int pwm_freq; /* PWM input mode */ > +}; > + > +struct isa1200_platform_data { > + const char *name; > + unsigned int pwm_ch_id; /* pwm channel id */ > + unsigned int max_timeout; > + unsigned int hap_en_gpio; > + unsigned int hap_len_gpio; /* GPIO to enable the internal LDO */ > + bool overdrive_high; /* high/low overdrive */ > + bool overdrive_en; /* enable/disable overdrive */ > + enum mode_control mode_ctrl; /* input/generation/wave */ > + union pwm_div_freq pwm_fd; > + bool smart_en; /* smart mode enable/disable */ > + bool is_erm; > + bool ext_clk_en; > + unsigned int chip_en; > + unsigned int duty; > + int (*power_on)(bool on); > + int (*dev_setup)(bool on); > +}; > + > +#endif /* __LINUX_ISA1200_H */ -- Sent by a consultant of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum. -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
