From: Kyungmin Park <kyungmin.park@xxxxxxxxxxx> isa1200 chip can be used to generate vibrations to indicate silent alerts, providing gaming haptic actions or vibrations in response to touches. It can operate in two modes, pwm generation and pwm input mode. Pwm generation mode requires external clock and pwm input mode needs the pwm signal to be given as input to the chip. This patch has been derived based on Kyungmin Park's haptic framework patches at http://lkml.org/lkml/2009/10/7/50 . Park's isa1200 driver registers to the haptic class, which is also introduced as part of the same patch series, and userspace will operate the vibrator through exported sysfs entries. This version supports only pwm input mode. This derived patch converts the driver from haptic framework to the Linux supported force feeback framework. It also supports the chip operation in both pwm input and generation modes. Change-Id: If253c71e833e629431a35864e33824d8d6dadb35 Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx> Signed-off-by: Mohan Pallaka <mpallaka@xxxxxxxxxxxxxx> --- drivers/input/misc/Kconfig | 12 + drivers/input/misc/Makefile | 1 + drivers/input/misc/isa1200.c | 442 +++++++++++++++++++++++++++++++++++++++++ include/linux/input/isa1200.h | 46 +++++ 4 files changed, 501 insertions(+), 0 deletions(-) create mode 100644 drivers/input/misc/isa1200.c create mode 100644 include/linux/input/isa1200.h diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index f9cf088..9fd762d 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -302,6 +302,18 @@ config HP_SDC_RTC Say Y here if you want to support the built-in real time clock of the HP SDC controller. +config INPUT_ISA1200 + tristate "ISA1200 haptic support" + depends on I2C + select INPUT_FF_MEMLESS + help + ISA1200 is a high performance enhanced haptic chip. + Say Y here if you want to support ISA1200 connected via I2C, + and select N if you are unsure. + + To compile this driver as a module, choose M here: the + module will be called isa1200. + config INPUT_PCF50633_PMU tristate "PCF50633 PMU events" depends on MFD_PCF50633 diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index e3f7984..47f74f7 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -23,6 +23,7 @@ obj-$(CONFIG_INPUT_CMA3000_I2C) += cma3000_d0x_i2c.o obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o +obj-$(CONFIG_INPUT_ISA1200) += isa1200.o obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o diff --git a/drivers/input/misc/isa1200.c b/drivers/input/misc/isa1200.c new file mode 100644 index 0000000..0f5448a --- /dev/null +++ b/drivers/input/misc/isa1200.c @@ -0,0 +1,442 @@ +/* + * Copyright (C) 2009 Samsung Electronics + * Kyungmin Park <kyungmin.park@xxxxxxxxxxx> + * + * Copyright (c) 2011, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) "%s: " fmt, __func__ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/workqueue.h> +#include <linux/delay.h> +#include <linux/pwm.h> +#include <linux/input.h> +#include <linux/slab.h> +#include <linux/pm.h> +#include <linux/input/isa1200.h> + +#define ISA1200_HCTRL0 0x30 +#define HCTRL0_MODE_CTRL_BIT (3) +#define HCTRL0_OVERDRIVE_HIGH_BIT (5) +#define HCTRL0_OVERDRIVE_EN_BIT (6) +#define HCTRL0_HAP_EN (7) +#define HCTRL0_RESET 0x01 +#define HCTRL1_RESET 0x4B + +#define ISA1200_HCTRL1 0x31 +#define HCTRL1_SMART_ENABLE_BIT (3) +#define HCTRL1_ERM_BIT (5) +#define HCTRL1_EXT_CLK_ENABLE_BIT (7) + +#define ISA1200_HCTRL5 0x35 +#define HCTRL5_VIB_STRT 0xD5 +#define HCTRL5_VIB_STOP 0x6B + +#define DIVIDER_128 (128) +#define DIVIDER_1024 (1024) +#define DIVIDE_SHIFTER_128 (7) + +#define FREQ_22400 (22400) +#define FREQ_172600 (172600) + +#define POR_DELAY_USEC (250) + +struct isa1200_chip { + const struct isa1200_platform_data *pdata; + struct i2c_client *client; + struct input_dev *input_device; + struct pwm_device *pwm; + unsigned int period_ns; + unsigned int state; + struct work_struct work; +}; + +static void isa1200_vib_set(struct isa1200_chip *haptic, bool enable) +{ + int rc; + + if (enable) { + if (haptic->pdata->mode_ctrl == PWM_INPUT_MODE) { + rc = pwm_config(haptic->pwm, + (haptic->period_ns * haptic->pdata->duty) / 100, + haptic->period_ns); + if (rc < 0) + pr_err("pwm_config fail\n"); + rc = pwm_enable(haptic->pwm); + if (rc < 0) + pr_err("pwm_enable fail\n"); + } else if (haptic->pdata->mode_ctrl == PWM_GEN_MODE) { + rc = i2c_smbus_write_byte_data(haptic->client, + ISA1200_HCTRL5, + HCTRL5_VIB_STRT); + if (rc < 0) + pr_err("start vibration fail\n"); + } + } else { + if (haptic->pdata->mode_ctrl == PWM_INPUT_MODE) + pwm_disable(haptic->pwm); + else if (haptic->pdata->mode_ctrl == PWM_GEN_MODE) { + rc = i2c_smbus_write_byte_data(haptic->client, + ISA1200_HCTRL5, + HCTRL5_VIB_STOP); + if (rc < 0) + pr_err("stop vibration fail\n"); + } + } +} + +static int isa1200_setup(struct i2c_client *client) +{ + struct isa1200_chip *haptic = i2c_get_clientdata(client); + int value, temp, rc; + + if (haptic->pdata->hap_en_gpio != haptic->pdata->hap_len_gpio) + gpio_set_value_cansleep(haptic->pdata->hap_len_gpio, 1); + + gpio_set_value_cansleep(haptic->pdata->hap_en_gpio, 0); + udelay(POR_DELAY_USEC); + gpio_set_value_cansleep(haptic->pdata->hap_en_gpio, 1); + + value = (haptic->pdata->smart_en << HCTRL1_SMART_ENABLE_BIT) | + (haptic->pdata->is_erm << HCTRL1_ERM_BIT) | + (haptic->pdata->ext_clk_en << HCTRL1_EXT_CLK_ENABLE_BIT); + + rc = i2c_smbus_write_byte_data(client, ISA1200_HCTRL1, value); + if (rc < 0) { + pr_err("i2c write failure\n"); + return rc; + } + + if (haptic->pdata->mode_ctrl == PWM_GEN_MODE) { + temp = haptic->pdata->pwm_fd.pwm_div; + if (temp < DIVIDER_128 || temp > DIVIDER_1024 || + temp % DIVIDER_128) { + pr_err("Invalid divisor\n"); + rc = -EINVAL; + goto reset_hctrl1; + } + value = ((temp >> DIVIDE_SHIFTER_128) - 1); + } else if (haptic->pdata->mode_ctrl == PWM_INPUT_MODE) { + temp = haptic->pdata->pwm_fd.pwm_freq; + if (temp < FREQ_22400 || temp > FREQ_172600 || + temp % FREQ_22400) { + pr_err("Invalid frequency\n"); + rc = -EINVAL; + goto reset_hctrl1; + } + value = ((temp / FREQ_22400) - 1); + haptic->period_ns = NSEC_PER_SEC / temp; + } + value |= (haptic->pdata->mode_ctrl << HCTRL0_MODE_CTRL_BIT) | + (haptic->pdata->overdrive_high << HCTRL0_OVERDRIVE_HIGH_BIT) | + (haptic->pdata->overdrive_en << HCTRL0_OVERDRIVE_EN_BIT) | + (haptic->pdata->chip_en << HCTRL0_HAP_EN); + + rc = i2c_smbus_write_byte_data(client, ISA1200_HCTRL0, value); + if (rc < 0) { + pr_err("i2c write failure\n"); + goto reset_hctrl1; + } + + return 0; + +reset_hctrl1: + i2c_smbus_write_byte_data(client, ISA1200_HCTRL1, + HCTRL1_RESET); + return rc; +} + +static void isa1200_worker(struct work_struct *work) +{ + struct isa1200_chip *haptic; + + haptic = container_of(work, struct isa1200_chip, work); + isa1200_vib_set(haptic, !!haptic->state); +} + +static int isa1200_play_effect(struct input_dev *dev, void *data, + struct ff_effect *effect) +{ + struct isa1200_chip *haptic = input_get_drvdata(dev); + + /* support basic vibration */ + haptic->state = effect->u.rumble.strong_magnitude >> 8; + if (!haptic->state) + haptic->state = effect->u.rumble.weak_magnitude >> 9; + + schedule_work(&haptic->work); + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int isa1200_suspend(struct device *dev) +{ + struct isa1200_chip *haptic = dev_get_drvdata(dev); + int rc; + + cancel_work_sync(&haptic->work); + /* turn-off current vibration */ + isa1200_vib_set(haptic, false); + + if (haptic->pdata->power_on) { + rc = haptic->pdata->power_on(false); + if (rc) { + pr_err("power-down failed\n"); + return rc; + } + } + return 0; +} + +static int isa1200_resume(struct device *dev) +{ + struct isa1200_chip *haptic = dev_get_drvdata(dev); + int rc; + + if (haptic->pdata->power_on) { + rc = haptic->pdata->power_on(true); + if (rc) { + pr_err("power-up failed\n"); + return rc; + } + } + + isa1200_setup(haptic->client); + return 0; +} +#else +#define isa1200_suspend NULL +#define isa1200_resume NULL +#endif + +static int __devinit isa1200_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct isa1200_chip *haptic; + int rc; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA)) { + pr_err("i2c is not supported\n"); + return -EIO; + } + + if (!client->dev.platform_data) { + pr_err("pdata is not avaiable\n"); + return -EINVAL; + } + + haptic = kzalloc(sizeof(struct isa1200_chip), GFP_KERNEL); + if (!haptic) { + pr_err("no memory\n"); + return -ENOMEM; + } + + haptic->pdata = client->dev.platform_data; + haptic->client = client; + + i2c_set_clientdata(client, haptic); + + /* device setup */ + if (haptic->pdata->dev_setup) { + rc = haptic->pdata->dev_setup(true); + if (rc < 0) { + pr_err("setup failed!\n"); + goto err_mem_alloc; + } + } + + /* power on */ + if (haptic->pdata->power_on) { + rc = haptic->pdata->power_on(true); + if (rc < 0) { + pr_err("power failed\n"); + goto err_setup; + } + } + + /* request gpio */ + rc = gpio_is_valid(haptic->pdata->hap_en_gpio); + if (rc) { + rc = gpio_request(haptic->pdata->hap_en_gpio, "haptic_gpio"); + if (rc) { + pr_err("gpio %d request failed\n", + haptic->pdata->hap_en_gpio); + goto err_power_on; + } + } else { + pr_err("Invalid gpio %d\n", + haptic->pdata->hap_en_gpio); + goto err_power_on; + } + + rc = gpio_direction_output(haptic->pdata->hap_en_gpio, 0); + if (rc) { + pr_err("gpio %d set direction failed\n", + haptic->pdata->hap_en_gpio); + goto err_hap_en_gpio_free; + } + + if (haptic->pdata->hap_en_gpio != haptic->pdata->hap_len_gpio) { + rc = gpio_request(haptic->pdata->hap_len_gpio, + "haptic_len_gpio"); + if (rc) { + pr_err("gpio %d request failed\n", + haptic->pdata->hap_len_gpio); + goto err_hap_en_gpio_free; + } + } + + /* setup registers */ + rc = isa1200_setup(haptic->client); + if (rc < 0) { + pr_err("setup fail %d\n", rc); + goto err_ldo_en_gpio_free; + } + + if (haptic->pdata->mode_ctrl == PWM_INPUT_MODE) { + haptic->pwm = pwm_request(haptic->pdata->pwm_ch_id, + haptic->client->driver->id_table->name); + if (IS_ERR(haptic->pwm)) { + pr_err("pwm request failed\n"); + rc = PTR_ERR(haptic->pwm); + goto err_reset_hctrl0; + } + } + + /* init workqeueue */ + INIT_WORK(&haptic->work, isa1200_worker); + + haptic->input_device = input_allocate_device(); + if (!haptic->input_device) { + pr_err("input device alloc failed\n"); + rc = -ENOMEM; + goto err_pwm_free ; + } + + input_set_drvdata(haptic->input_device, haptic); + haptic->input_device->name = haptic->pdata->name ? : + "isa1200-haptic-device"; + + haptic->input_device->dev.parent = &client->dev; + haptic->input_device->id.bustype = BUS_I2C; + + input_set_capability(haptic->input_device, EV_FF, FF_RUMBLE); + + rc = input_ff_create_memless(haptic->input_device, NULL, + isa1200_play_effect); + if (rc < 0) { + pr_err("unable to register with ff\n"); + goto err_free_dev; + } + + rc = input_register_device(haptic->input_device); + if (rc < 0) { + pr_err("unable to register input device\n"); + goto err_ff_destroy; + } + return 0; + +err_ff_destroy: + input_ff_destroy(haptic->input_device); +err_free_dev: + input_free_device(haptic->input_device); +err_pwm_free: + if (haptic->pdata->mode_ctrl == PWM_INPUT_MODE) + pwm_free(haptic->pwm); +err_reset_hctrl0: + i2c_smbus_write_byte_data(haptic->client, ISA1200_HCTRL0, + HCTRL0_RESET); +err_ldo_en_gpio_free: + if (haptic->pdata->hap_en_gpio != haptic->pdata->hap_len_gpio) + gpio_free(haptic->pdata->hap_len_gpio); +err_hap_en_gpio_free: + gpio_free(haptic->pdata->hap_en_gpio); +err_power_on: + if (haptic->pdata->power_on) + haptic->pdata->power_on(false); +err_setup: + if (haptic->pdata->dev_setup) + haptic->pdata->dev_setup(false); +err_mem_alloc: + kfree(haptic); + return rc; +} + +static int __devexit isa1200_remove(struct i2c_client *client) +{ + struct isa1200_chip *haptic = i2c_get_clientdata(client); + + cancel_work_sync(&haptic->work); + /* turn-off current vibration */ + isa1200_vib_set(haptic, false); + + if (haptic->pdata->mode_ctrl == PWM_INPUT_MODE) + pwm_free(haptic->pwm); + + if (haptic->pdata->hap_en_gpio != haptic->pdata->hap_len_gpio) + gpio_free(haptic->pdata->hap_len_gpio); + gpio_free(haptic->pdata->hap_en_gpio); + + /* reset hardware registers */ + i2c_smbus_write_byte_data(haptic->client, ISA1200_HCTRL0, + HCTRL0_RESET); + i2c_smbus_write_byte_data(haptic->client, ISA1200_HCTRL1, + HCTRL1_RESET); + + if (haptic->pdata->dev_setup) + haptic->pdata->dev_setup(false); + + /* power-off the chip */ + if (haptic->pdata->power_on) + haptic->pdata->power_on(false); + + input_unregister_device(haptic->input_device); + kfree(haptic); + + return 0; +} + +static const struct i2c_device_id isa1200_id_table[] = { + {"isa1200", 0}, + { }, +}; +MODULE_DEVICE_TABLE(i2c, isa1200_id_table); + +static SIMPLE_DEV_PM_OPS(isa1200_pm_ops, isa1200_suspend, isa1200_resume); + +static struct i2c_driver isa1200_driver = { + .driver = { + .name = "isa1200", + .owner = THIS_MODULE, + .pm = &isa1200_pm_ops, + }, + .probe = isa1200_probe, + .remove = __devexit_p(isa1200_remove), + .id_table = isa1200_id_table, +}; + +static int __init isa1200_init(void) +{ + return i2c_add_driver(&isa1200_driver); +} +module_init(isa1200_init); + +static void __exit isa1200_exit(void) +{ + i2c_del_driver(&isa1200_driver); +} +module_exit(isa1200_exit); + +MODULE_DESCRIPTION("isa1200 based vibrator chip driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Kyungmin Park <kyungmin.park@xxxxxxxxxxx>"); +MODULE_AUTHOR("Mohan Pallaka <mpallaka@xxxxxxxxxxxxxx>"); diff --git a/include/linux/input/isa1200.h b/include/linux/input/isa1200.h new file mode 100644 index 0000000..a1b43d5 --- /dev/null +++ b/include/linux/input/isa1200.h @@ -0,0 +1,46 @@ +/* + * Copyright (C) 2009 Samsung Electronics + * Kyungmin Park <kyungmin.park@xxxxxxxxxxx> + * + * Copyright (c) 2011, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __LINUX_ISA1200_H +#define __LINUX_ISA1200_H + +enum mode_control { + POWER_DOWN_MODE = 0, + PWM_INPUT_MODE, + PWM_GEN_MODE, + WAVE_GEN_MODE +}; + +union pwm_div_freq { + unsigned int pwm_div; /* PWM gen mode */ + unsigned int pwm_freq; /* PWM input mode */ +}; + +struct isa1200_platform_data { + const char *name; + unsigned int pwm_ch_id; /* pwm channel id */ + unsigned int max_timeout; + unsigned int hap_en_gpio; + unsigned int hap_len_gpio; /* GPIO to enable the internal LDO */ + bool overdrive_high; /* high/low overdrive */ + bool overdrive_en; /* enable/disable overdrive */ + enum mode_control mode_ctrl; /* input/generation/wave */ + union pwm_div_freq pwm_fd; + bool smart_en; /* smart mode enable/disable */ + bool is_erm; + bool ext_clk_en; + unsigned int chip_en; + unsigned int duty; + int (*power_on)(bool on); + int (*dev_setup)(bool on); +}; + +#endif /* __LINUX_ISA1200_H */ -- 1.7.1.1 -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html