On Tue, Dec 07, 2010 at 09:30:27AM -0500, Maciej W. Rozycki wrote: > On Mon, 6 Dec 2010, Guenter Roeck wrote: > > > A quick look through sb1250 vs. sb1480 code shows that the 1480 uses different > > interrupt numbers. The patch assigns the sb1250 interrupt numbers, so unless > > I am missing something the code as written can not work for sb1480. > > That well could be -- I never had access to a BigSur board. The > board-specific interrupt numbers should either be available from the board > manual (I haven't checked if one has been released; I certainly have one > for my SWARM) or quoted somewhere in our tree. Otherwise figuring them > out by trial and error should be a trivial exercise for someone with > actual hardware at hand. > I already sent a reply to the original patch - I confirmed that the interrupts are different. Those are SOC interrupts, so they are CPU specific, not board specific. Code started working after I replaced the sb1250 interrupts with bcm1480 interrupts. Guenter -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
