Re: [PATCH 1/2] i2c-ocores: Adapt for device tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

quick review (hopefully not too quick)...

On Wed, Nov 24, 2010 at 03:09:48PM +0100, Jonas Bonn wrote:
> This patch adapts the i2c-ocores driver for being defined and configured via
> a device tree description.
> 
> The device tree bits need to be protected by CONFIG_OF guards as this is
> still an optional feature.
> 
> Signed-off-by: Jonas Bonn <jonas@xxxxxxxxxxxx>
> ---
>  drivers/i2c/busses/i2c-ocores.c |   63 ++++++++++++++++++++++++++++++++++-----
>  1 files changed, 55 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
> index 0070371..86a536c 100644
> --- a/drivers/i2c/busses/i2c-ocores.c
> +++ b/drivers/i2c/busses/i2c-ocores.c
> @@ -210,6 +210,31 @@ static struct i2c_adapter ocores_adapter = {
>  	.algo		= &ocores_algorithm,
>  };
>  
> +#ifdef CONFIG_OF
> +static int ocores_i2c_of_probe(struct platform_device* pdev,
> +				struct ocores_i2c* i2c)
> +{
> +	int* val;
> +
> +	val = (int*) of_get_property(pdev->dev.of_node, "regstep", NULL);
> +	if (!val) {
> +		dev_err(&pdev->dev, "Missing required paramter 'regstep'");
> +		return -ENODEV;
> +	}

New properties need to be documented (e.g. like here¹). What is regstep?

¹ http://lists.ozlabs.org/pipermail/devicetree-discuss/2010-November/003569.html

> +
> +	i2c->regstep = *val;
> +	val = (int*) of_get_property(pdev->dev.of_node, "clock_khz", NULL);
> +	if (!val) {
> +		dev_err(&pdev->dev, "Missing required paramter 'clock_khz'");
> +		return -ENODEV;
> +	}

Other i2c-drivers use "clock-frequency", you should as well.

> +	i2c->clock_khz = *val;
> +
> +	return 0;
> +}
> +#else
> +#define ocores_i2c_of_probe(pdev,i2c) -ENODEV
> +#endif
>  
>  static int __devinit ocores_i2c_probe(struct platform_device *pdev)
>  {
> @@ -227,10 +252,6 @@ static int __devinit ocores_i2c_probe(struct platform_device *pdev)
>  	if (!res2)
>  		return -ENODEV;
>  
> -	pdata = (struct ocores_i2c_platform_data*) pdev->dev.platform_data;
> -	if (!pdata)
> -		return -ENODEV;
> -
>  	i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
>  	if (!i2c)
>  		return -ENOMEM;
> @@ -249,8 +270,16 @@ static int __devinit ocores_i2c_probe(struct platform_device *pdev)
>  		goto map_failed;
>  	}
>  
> -	i2c->regstep = pdata->regstep;
> -	i2c->clock_khz = pdata->clock_khz;
> +	pdata = (struct ocores_i2c_platform_data*) pdev->dev.platform_data;

The cast can be dropped.

> +	if (pdata) {
> +		i2c->regstep = pdata->regstep;
> +		i2c->clock_khz = pdata->clock_khz;
> +	} else {
> +		ret = ocores_i2c_of_probe(pdev, i2c);
> +		if (ret)
> +			return ret;
> +	}
> +
>  	ocores_init(i2c);
>  
>  	init_waitqueue_head(&i2c->wait);
> @@ -265,6 +294,9 @@ static int __devinit ocores_i2c_probe(struct platform_device *pdev)
>  	i2c->adap = ocores_adapter;
>  	i2c_set_adapdata(&i2c->adap, i2c);
>  	i2c->adap.dev.parent = &pdev->dev;
> +#ifdef CONFIG_OF
> +	i2c->adap.dev.of_node = pdev->dev.of_node;
> +#endif

No need for the ifdef here.

>  
>  	/* add i2c adapter to i2c tree */
>  	ret = i2c_add_adapter(&i2c->adap);
> @@ -274,8 +306,10 @@ static int __devinit ocores_i2c_probe(struct platform_device *pdev)
>  	}
>  
>  	/* add in known devices to the bus */
> -	for (i = 0; i < pdata->num_devices; i++)
> -		i2c_new_device(&i2c->adap, pdata->devices + i);
> +	if (pdata) {
> +		for (i = 0; i < pdata->num_devices; i++)
> +			i2c_new_device(&i2c->adap, pdata->devices + i);
> +	}
>  
>  	return 0;
>  
> @@ -344,6 +378,16 @@ static int ocores_i2c_resume(struct platform_device *pdev)
>  #define ocores_i2c_resume	NULL
>  #endif
>  
> +#ifdef CONFIG_OF
> +static struct of_device_id ocores_i2c_match[] = {
> +        {
> +                .compatible = "opencores,i2c-ocores",
> +        },
> +        {},
> +};
> +MODULE_DEVICE_TABLE(of, ocores_i2c_match);
> +#endif

ditto

> +
>  /* work with hotplug and coldplug */
>  MODULE_ALIAS("platform:ocores-i2c");
>  
> @@ -355,6 +399,9 @@ static struct platform_driver ocores_i2c_driver = {
>  	.driver  = {
>  		.owner = THIS_MODULE,
>  		.name = "ocores-i2c",
> +#ifdef CONFIG_OF
> +                .of_match_table = ocores_i2c_match,
> +#endif

ditto

>  	},
>  };
>  
> -- 
> 1.7.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 
Pengutronix e.K.                           | Wolfram Sang                |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux