From: Andrew Chew <achew@xxxxxxxxxx>
This is for the Asahi Kasei's I2C compass sensor AK8975.
Signed-off-by: Andrew Chew <achew@xxxxxxxxxx>
---
drivers/misc/Kconfig | 8 +
drivers/misc/Makefile | 1 +
drivers/misc/akm8975.c | 670 +++++++++++++++++++++++++++++++++++++++++++++++
include/linux/akm8975.h | 87 ++++++
4 files changed, 766 insertions(+), 0 deletions(-)
create mode 100644 drivers/misc/akm8975.c
create mode 100644 include/linux/akm8975.h
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 26386a9..9bb3d03 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -304,6 +304,14 @@ config SENSORS_TSL2550
This driver can also be built as a module. If so, the module
will be called tsl2550.
+config SENSORS_AK8975
+ tristate "AK8975 compass support"
+ default n
+ depends on I2C
+ help
+ If you say yes here you get support for Asahi Kasei's
+ orientation sensor AK8975.
+
config EP93XX_PWM
tristate "EP93xx PWM support"
depends on ARCH_EP93XX
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 6ed06a1..366791b 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -31,3 +31,4 @@ obj-$(CONFIG_IWMC3200TOP) += iwmc3200top/
obj-y += eeprom/
obj-y += cb710/
obj-$(CONFIG_VMWARE_BALLOON) += vmware_balloon.o
+obj-$(CONFIG_SENSORS_AK8975) += akm8975.o
diff --git a/drivers/misc/akm8975.c b/drivers/misc/akm8975.c
new file mode 100644
index 0000000..17a096e
--- /dev/null
+++ b/drivers/misc/akm8975.c
@@ -0,0 +1,670 @@
+/* drivers/misc/akm8975.c - akm8975 compass driver
+ *
+ * Copyright (C) 2007-2008 HTC Corporation.
+ * Author: Hou-Kun Chen <houkun.chen@xxxxxxxxx>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+/*
+ * Revised by AKM 2009/04/02
+ * Revised by Motorola 2010/05/27
+ *
+ */
+
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+#include <linux/miscdevice.h>
+#include <linux/gpio.h>
+#include <linux/uaccess.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/workqueue.h>
+#include <linux/freezer.h>
+#include <linux/akm8975.h>
+
+#define AK8975DRV_CALL_DBG 0
+#if AK8975DRV_CALL_DBG
+#define FUNCDBG(msg) pr_err("%s:%s\n", __func__, msg);
+#else
+#define FUNCDBG(msg)
+#endif
+
+#define AK8975DRV_DATA_DBG 0
+#define MAX_FAILURE_COUNT 10
+
+struct akm8975_data {
+ struct i2c_client *this_client;
+ struct akm8975_platform_data *pdata;
+ struct input_dev *input_dev;
+ struct work_struct work;
+ struct mutex flags_lock;
+};
+
+/*
+* Because misc devices can not carry a pointer from driver register to
+* open, we keep this global. This limits the driver to a single instance.
+*/
+struct akm8975_data *akmd_data;
+
+static DECLARE_WAIT_QUEUE_HEAD(open_wq);
+
+static atomic_t open_flag;
+
+static short m_flag;
+static short a_flag;
+static short t_flag;
+static short mv_flag;
+
+static short akmd_delay;
+
+static ssize_t akm8975_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ return sprintf(buf, "%u\n", i2c_smbus_read_byte_data(client,
+ AK8975_REG_CNTL));
+}
+static ssize_t akm8975_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ unsigned long val;
+ strict_strtoul(buf, 10, &val);
+ if (val > 0xff)
+ return -EINVAL;
+ i2c_smbus_write_byte_data(client, AK8975_REG_CNTL, val);
+ return count;
+}
+static DEVICE_ATTR(akm_ms1, S_IWUSR | S_IRUGO, akm8975_show, akm8975_store);
+
+static int akm8975_i2c_rxdata(struct akm8975_data *akm, char *buf, int length)
+{
+ struct i2c_msg msgs[] = {
+ {
+ .addr = akm->this_client->addr,
+ .flags = 0,
+ .len = 1,
+ .buf = buf,
+ },
+ {
+ .addr = akm->this_client->addr,
+ .flags = I2C_M_RD,
+ .len = length,
+ .buf = buf,
+ },
+ };
+
+ FUNCDBG("called");
+
+ if (i2c_transfer(akm->this_client->adapter, msgs, 2) < 0) {
+ pr_err("akm8975_i2c_rxdata: transfer error\n");
+ return EIO;
+ } else
+ return 0;
+}
+
+static int akm8975_i2c_txdata(struct akm8975_data *akm, char *buf, int length)
+{
+ struct i2c_msg msgs[] = {
+ {
+ .addr = akm->this_client->addr,
+ .flags = 0,
+ .len = length,
+ .buf = buf,
+ },
+ };
+
+ FUNCDBG("called");
+
+ if (i2c_transfer(akm->this_client->adapter, msgs, 1) < 0) {
+ pr_err("akm8975_i2c_txdata: transfer error\n");
+ return -EIO;
+ } else
+ return 0;
+}
+
+static void akm8975_ecs_report_value(struct akm8975_data *akm, short *rbuf)
+{
+ struct akm8975_data *data = i2c_get_clientdata(akm->this_client);
+
+ FUNCDBG("called");
+
+#if AK8975DRV_DATA_DBG
+ pr_info("akm8975_ecs_report_value: yaw = %d, pitch = %d, roll = %d\n",
+ rbuf[0], rbuf[1], rbuf[2]);
+ pr_info("tmp = %d, m_stat= %d, g_stat=%d\n", rbuf[3], rbuf[4], rbuf[5]);
+ pr_info("Acceleration: x = %d LSB, y = %d LSB, z = %d LSB\n",
+ rbuf[6], rbuf[7], rbuf[8]);
+ pr_info("Magnetic: x = %d LSB, y = %d LSB, z = %d LSB\n\n",
+ rbuf[9], rbuf[10], rbuf[11]);
+#endif
+ mutex_lock(&akm->flags_lock);
+ /* Report magnetic sensor information */
+ if (m_flag) {
+ input_report_abs(data->input_dev, ABS_RX, rbuf[0]);
+ input_report_abs(data->input_dev, ABS_RY, rbuf[1]);
+ input_report_abs(data->input_dev, ABS_RZ, rbuf[2]);
+ input_report_abs(data->input_dev, ABS_RUDDER, rbuf[4]);
+ }
+
+ /* Report acceleration sensor information */
+ if (a_flag) {
+ input_report_abs(data->input_dev, ABS_X, rbuf[6]);
+ input_report_abs(data->input_dev, ABS_Y, rbuf[7]);
+ input_report_abs(data->input_dev, ABS_Z, rbuf[8]);
+ input_report_abs(data->input_dev, ABS_WHEEL, rbuf[5]);
+ }
+
+ /* Report temperature information */
+ if (t_flag)
+ input_report_abs(data->input_dev, ABS_THROTTLE, rbuf[3]);
+
+ if (mv_flag) {
+ input_report_abs(data->input_dev, ABS_HAT0X, rbuf[9]);
+ input_report_abs(data->input_dev, ABS_HAT0Y, rbuf[10]);
+ input_report_abs(data->input_dev, ABS_BRAKE, rbuf[11]);
+ }
+ mutex_unlock(&akm->flags_lock);
+
+ input_sync(data->input_dev);
+}
+
+static void akm8975_ecs_close_done(struct akm8975_data *akm)
+{
+ FUNCDBG("called");
+ mutex_lock(&akm->flags_lock);
+ m_flag = 1;
+ a_flag = 1;
+ t_flag = 1;
+ mv_flag = 1;
+ mutex_unlock(&akm->flags_lock);
+}
+
+static int akm_aot_open(struct inode *inode, struct file *file)
+{
+ int ret = -1;
+
+ FUNCDBG("called");
+ if (atomic_cmpxchg(&open_flag, 0, 1) == 0) {
+ wake_up(&open_wq);
+ ret = 0;
+ }
+
+ ret = nonseekable_open(inode, file);
+ if (ret)
+ return ret;
+
+ file->private_data = akmd_data;
+
+ return ret;
+}
+
+static int akm_aot_release(struct inode *inode, struct file *file)
+{
+ FUNCDBG("called");
+ atomic_set(&open_flag, 0);
+ wake_up(&open_wq);
+ return 0;
+}
+
+static int akm_aot_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ void __user *argp = (void __user *) arg;
+ short flag;
+ struct akm8975_data *akm = file->private_data;
+
+ FUNCDBG("called");
+
+ switch (cmd) {
+ case ECS_IOCTL_APP_SET_MFLAG:
+ case ECS_IOCTL_APP_SET_AFLAG:
+ case ECS_IOCTL_APP_SET_MVFLAG:
+ if (copy_from_user(&flag, argp, sizeof(flag)))
+ return -EFAULT;
+ if (flag < 0 || flag > 1)
+ return -EINVAL;
+ break;
+ case ECS_IOCTL_APP_SET_DELAY:
+ if (copy_from_user(&flag, argp, sizeof(flag)))
+ return -EFAULT;
+ break;
+ default:
+ break;
+ }
+
+ mutex_lock(&akm->flags_lock);
+ switch (cmd) {
+ case ECS_IOCTL_APP_SET_MFLAG:
+ m_flag = flag;
+ break;
+ case ECS_IOCTL_APP_GET_MFLAG:
+ flag = m_flag;
+ break;
+ case ECS_IOCTL_APP_SET_AFLAG:
+ a_flag = flag;
+ break;
+ case ECS_IOCTL_APP_GET_AFLAG:
+ flag = a_flag;
+ break;
+ case ECS_IOCTL_APP_SET_MVFLAG:
+ mv_flag = flag;
+ break;
+ case ECS_IOCTL_APP_GET_MVFLAG:
+ flag = mv_flag;
+ break;
+ case ECS_IOCTL_APP_SET_DELAY:
+ akmd_delay = flag;
+ break;
+ case ECS_IOCTL_APP_GET_DELAY:
+ flag = akmd_delay;
+ break;
+ default:
+ return -ENOTTY;
+ }
+ mutex_unlock(&akm->flags_lock);
+
+ switch (cmd) {
+ case ECS_IOCTL_APP_GET_MFLAG:
+ case ECS_IOCTL_APP_GET_AFLAG:
+ case ECS_IOCTL_APP_GET_MVFLAG:
+ case ECS_IOCTL_APP_GET_DELAY:
+ if (copy_to_user(argp, &flag, sizeof(flag)))
+ return -EFAULT;
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static int akmd_open(struct inode *inode, struct file *file)
+{
+ int err = 0;
+
+ FUNCDBG("called");
+ err = nonseekable_open(inode, file);
+ if (err)
+ return err;
+
+ file->private_data = akmd_data;
+ return 0;
+}
+
+static int akmd_release(struct inode *inode, struct file *file)
+{
+ struct akm8975_data *akm = file->private_data;
+
+ FUNCDBG("called");
+ akm8975_ecs_close_done(akm);
+ return 0;
+}
+
+static int akmd_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ void __user *argp = (void __user *) arg;
+
+ char rwbuf[16];
+ int ret = -1;
+ int status;
+ short value[12];
+ short delay;
+ struct akm8975_data *akm = file->private_data;
+
+ FUNCDBG("called");
+
+ switch (cmd) {
+ case ECS_IOCTL_READ:
+ case ECS_IOCTL_WRITE:
+ if (copy_from_user(&rwbuf, argp, sizeof(rwbuf)))
+ return -EFAULT;
+ break;
+
+ case ECS_IOCTL_SET_YPR:
+ if (copy_from_user(&value, argp, sizeof(value)))
+ return -EFAULT;
+ break;
+
+ default:
+ break;
+ }
+
+ switch (cmd) {
+ case ECS_IOCTL_READ:
+ if (rwbuf[0] < 1)
+ return -EINVAL;
+
+ ret = akm8975_i2c_rxdata(akm, &rwbuf[1], rwbuf[0]);
+ if (ret < 0)
+ return ret;
+ break;
+
+ case ECS_IOCTL_WRITE:
+ if (rwbuf[0] < 2)
+ return -EINVAL;
+
+ ret = akm8975_i2c_txdata(akm, &rwbuf[1], rwbuf[0]);
+ if (ret < 0)
+ return ret;
+ break;
+ case ECS_IOCTL_SET_YPR:
+ akm8975_ecs_report_value(akm, value);
+ break;
+
+ case ECS_IOCTL_GET_OPEN_STATUS:
+ wait_event_interruptible(open_wq,
+ (atomic_read(&open_flag) != 0));
+ status = atomic_read(&open_flag);
+ break;
+ case ECS_IOCTL_GET_CLOSE_STATUS:
+ wait_event_interruptible(open_wq,
+ (atomic_read(&open_flag) == 0));
+ status = atomic_read(&open_flag);
+ break;
+
+ case ECS_IOCTL_GET_DELAY:
+ delay = akmd_delay;
+ break;
+
+ default:
+ FUNCDBG("Unknown cmd\n");
+ return -ENOTTY;
+ }
+
+ switch (cmd) {
+ case ECS_IOCTL_READ:
+ if (copy_to_user(argp, &rwbuf, sizeof(rwbuf)))
+ return -EFAULT;
+ break;
+ case ECS_IOCTL_GET_OPEN_STATUS:
+ case ECS_IOCTL_GET_CLOSE_STATUS:
+ if (copy_to_user(argp, &status, sizeof(status)))
+ return -EFAULT;
+ break;
+ case ECS_IOCTL_GET_DELAY:
+ if (copy_to_user(argp, &delay, sizeof(delay)))
+ return -EFAULT;
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+/* needed to clear the int. pin */
+static void akm_work_func(struct work_struct *work)
+{
+ struct akm8975_data *akm =
+ container_of(work, struct akm8975_data, work);
+
+ FUNCDBG("called");
+ enable_irq(akm->this_client->irq);
+}
+
+static irqreturn_t akm8975_interrupt(int irq, void *dev_id)
+{
+ struct akm8975_data *akm = dev_id;
+ FUNCDBG("called");
+
+ disable_irq_nosync(akm->this_client->irq);
+ schedule_work(&akm->work);
+ return IRQ_HANDLED;
+}
+
+static int akm8975_power_off(struct akm8975_data *akm)
+{
+#if AK8975DRV_CALL_DBG
+ pr_info("%s\n", __func__);
+#endif
+ if (akm->pdata->power_off)
+ akm->pdata->power_off();
+
+ return 0;
+}
+
+static int akm8975_power_on(struct akm8975_data *akm)
+{
+ int err;
+
+#if AK8975DRV_CALL_DBG
+ pr_info("%s\n", __func__);
+#endif
+ if (akm->pdata->power_on) {
+ err = akm->pdata->power_on();
+ if (err < 0)
+ return err;
+ }
+ return 0;
+}
+
+static int akm8975_init_client(struct i2c_client *client)
+{
+ struct akm8975_data *data;
+ int ret;
+
+ data = i2c_get_clientdata(client);
+
+ ret = request_irq(client->irq, akm8975_interrupt, IRQF_TRIGGER_RISING,
+ "akm8975", data);
+
+ if (ret < 0) {
+ pr_err("akm8975_init_client: request irq failed\n");
+ goto err;
+ }
+
+ init_waitqueue_head(&open_wq);
+
+ mutex_lock(&data->flags_lock);
+ m_flag = 1;
+ a_flag = 1;
+ t_flag = 1;
+ mv_flag = 1;
+ mutex_unlock(&data->flags_lock);
+
+ return 0;
+err:
+ return ret;
+}
+
+static const struct file_operations akmd_fops = {
+ .owner = THIS_MODULE,
+ .open = akmd_open,
+ .release = akmd_release,
+ .ioctl = akmd_ioctl,
+};
+
+static const struct file_operations akm_aot_fops = {
+ .owner = THIS_MODULE,
+ .open = akm_aot_open,
+ .release = akm_aot_release,
+ .ioctl = akm_aot_ioctl,
+};
+
+static struct miscdevice akm_aot_device = {
+ .minor = MISC_DYNAMIC_MINOR,
+ .name = "akm8975_aot",
+ .fops = &akm_aot_fops,
+};
+
+static struct miscdevice akmd_device = {
+ .minor = MISC_DYNAMIC_MINOR,
+ .name = "akm8975_dev",
+ .fops = &akmd_fops,
+};
+
+int akm8975_probe(struct i2c_client *client,
+ const struct i2c_device_id *devid)
+{
+ struct akm8975_data *akm;
+ int err;
+ FUNCDBG("called");
+
+ if (client->dev.platform_data == NULL) {
+ dev_err(&client->dev, "platform data is NULL. exiting.\n");
+ err = -ENODEV;
+ goto exit_platform_data_null;
+ }
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+ dev_err(&client->dev, "platform data is NULL. exiting.\n");
+ err = -ENODEV;
+ goto exit_check_functionality_failed;
+ }
+
+ akm = kzalloc(sizeof(struct akm8975_data), GFP_KERNEL);
+ if (!akm) {
+ dev_err(&client->dev,
+ "failed to allocate memory for module data\n");
+ err = -ENOMEM;
+ goto exit_alloc_data_failed;
+ }
+
+ akm->pdata = client->dev.platform_data;
+
+ mutex_init(&akm->flags_lock);
+ INIT_WORK(&akm->work, akm_work_func);
+ i2c_set_clientdata(client, akm);
+
+ err = akm8975_power_on(akm);
+ if (err < 0)
+ goto exit_power_on_failed;
+
+ akm8975_init_client(client);
+ akm->this_client = client;
+ akmd_data = akm;
+
+ akm->input_dev = input_allocate_device();
+ if (!akm->input_dev) {
+ err = -ENOMEM;
+ dev_err(&akm->this_client->dev,
+ "input device allocate failed\n");
+ goto exit_input_dev_alloc_failed;
+ }
+
+ set_bit(EV_ABS, akm->input_dev->evbit);
+
+ /* yaw */
+ input_set_abs_params(akm->input_dev, ABS_RX, 0, 23040, 0, 0);
+ /* pitch */
+ input_set_abs_params(akm->input_dev, ABS_RY, -11520, 11520, 0, 0);
+ /* roll */
+ input_set_abs_params(akm->input_dev, ABS_RZ, -5760, 5760, 0, 0);
+ /* x-axis acceleration */
+ input_set_abs_params(akm->input_dev, ABS_X, -5760, 5760, 0, 0);
+ /* y-axis acceleration */
+ input_set_abs_params(akm->input_dev, ABS_Y, -5760, 5760, 0, 0);
+ /* z-axis acceleration */
+ input_set_abs_params(akm->input_dev, ABS_Z, -5760, 5760, 0, 0);
+ /* temparature */
+ input_set_abs_params(akm->input_dev, ABS_THROTTLE, -30, 85, 0, 0);
+ /* status of magnetic sensor */
+ input_set_abs_params(akm->input_dev, ABS_RUDDER, 0, 3, 0, 0);
+ /* status of acceleration sensor */
+ input_set_abs_params(akm->input_dev, ABS_WHEEL, 0, 3, 0, 0);
+ /* x-axis of raw magnetic vector */
+ input_set_abs_params(akm->input_dev, ABS_HAT0X, -20480, 20479, 0, 0);
+ /* y-axis of raw magnetic vector */
+ input_set_abs_params(akm->input_dev, ABS_HAT0Y, -20480, 20479, 0, 0);
+ /* z-axis of raw magnetic vector */
+ input_set_abs_params(akm->input_dev, ABS_BRAKE, -20480, 20479, 0, 0);
+
+ akm->input_dev->name = "compass";
+
+ err = input_register_device(akm->input_dev);
+ if (err) {
+ pr_err("akm8975_probe: Unable to register input device: %s\n",
+ akm->input_dev->name);
+ goto exit_input_register_device_failed;
+ }
+
+ err = misc_register(&akmd_device);
+ if (err) {
+ pr_err("akm8975_probe: akmd_device register failed\n");
+ goto exit_misc_device_register_failed;
+ }
+
+ err = misc_register(&akm_aot_device);
+ if (err) {
+ pr_err("akm8975_probe: akm_aot_device register failed\n");
+ goto exit_misc_device_register_failed;
+ }
+
+ err = device_create_file(&client->dev, &dev_attr_akm_ms1);
+
+ return 0;
+
+exit_misc_device_register_failed:
+exit_input_register_device_failed:
+ input_free_device(akm->input_dev);
+exit_input_dev_alloc_failed:
+ akm8975_power_off(akm);
+exit_power_on_failed:
+ kfree(akm);
+exit_alloc_data_failed:
+exit_check_functionality_failed:
+exit_platform_data_null:
+ return err;
+}
+
+static int __devexit akm8975_remove(struct i2c_client *client)
+{
+ struct akm8975_data *akm = i2c_get_clientdata(client);
+ FUNCDBG("called");
+ free_irq(client->irq, NULL);
+ input_unregister_device(akm->input_dev);
+ misc_deregister(&akmd_device);
+ misc_deregister(&akm_aot_device);
+ akm8975_power_off(akm);
+ kfree(akm);
+ return 0;
+}
+
+static const struct i2c_device_id akm8975_id[] = {
+ { "akm8975", 0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, akm8975_id);
+
+static struct i2c_driver akm8975_driver = {
+ .probe = akm8975_probe,
+ .remove = akm8975_remove,
+ .id_table = akm8975_id,
+ .driver = {
+ .name = "akm8975",
+ },
+};
+
+static int __init akm8975_init(void)
+{
+ pr_info("AK8975 compass driver: init\n");
+ FUNCDBG("AK8975 compass driver: init\n");
+ return i2c_add_driver(&akm8975_driver);
+}
+
+static void __exit akm8975_exit(void)
+{
+ FUNCDBG("AK8975 compass driver: exit\n");
+ i2c_del_driver(&akm8975_driver);
+}
+
+module_init(akm8975_init);
+module_exit(akm8975_exit);
+
+MODULE_AUTHOR("Hou-Kun Chen <hk_chen@xxxxxxx>");
+MODULE_DESCRIPTION("AK8975 compass driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/akm8975.h b/include/linux/akm8975.h
new file mode 100644
index 0000000..7d02120
--- /dev/null
+++ b/include/linux/akm8975.h
@@ -0,0 +1,87 @@
+/*
+ * Definitions for akm8975 compass chip.
+ */
+#ifndef AKM8975_H
+#define AKM8975_H
+
+#include <linux/ioctl.h>
+
+/*! \name AK8975 operation mode
+ \anchor AK8975_Mode
+ Defines an operation mode of the AK8975.*/
+/*! @{*/
+#define AK8975_MODE_SNG_MEASURE 0x01
+#define AK8975_MODE_SELF_TEST 0x08
+#define AK8975_MODE_FUSE_ACCESS 0x0F
+#define AK8975_MODE_POWER_DOWN 0x00
+/*! @}*/
+
+#define RBUFF_SIZE 8 /* Rx buffer size */
+
+/*! \name AK8975 register address
+\anchor AK8975_REG
+Defines a register address of the AK8975.*/
+/*! @{*/
+#define AK8975_REG_WIA 0x00
+#define AK8975_REG_INFO 0x01
+#define AK8975_REG_ST1 0x02
+#define AK8975_REG_HXL 0x03
+#define AK8975_REG_HXH 0x04
+#define AK8975_REG_HYL 0x05
+#define AK8975_REG_HYH 0x06
+#define AK8975_REG_HZL 0x07
+#define AK8975_REG_HZH 0x08
+#define AK8975_REG_ST2 0x09
+#define AK8975_REG_CNTL 0x0A
+#define AK8975_REG_RSV 0x0B
+#define AK8975_REG_ASTC 0x0C
+#define AK8975_REG_TS1 0x0D
+#define AK8975_REG_TS2 0x0E
+#define AK8975_REG_I2CDIS 0x0F
+/*! @}*/
+
+/*! \name AK8975 fuse-rom address
+\anchor AK8975_FUSE
+Defines a read-only address of the fuse ROM of the AK8975.*/
+/*! @{*/
+#define AK8975_FUSE_ASAX 0x10
+#define AK8975_FUSE_ASAY 0x11
+#define AK8975_FUSE_ASAZ 0x12
+/*! @}*/
+
+#define AKMIO 0xA1
+
+/* IOCTLs for AKM library */
+#define ECS_IOCTL_WRITE _IOW(AKMIO, 0x02, char[5])
+#define ECS_IOCTL_READ _IOWR(AKMIO, 0x03, char[5])
+#define ECS_IOCTL_GETDATA _IOR(AKMIO, 0x08, char[RBUFF_SIZE])
+#define ECS_IOCTL_SET_YPR _IOW(AKMIO, 0x0C, short[12])
+#define ECS_IOCTL_GET_OPEN_STATUS _IOR(AKMIO, 0x0D, int)
+#define ECS_IOCTL_GET_CLOSE_STATUS _IOR(AKMIO, 0x0E, int)
+#define ECS_IOCTL_GET_DELAY _IOR(AKMIO, 0x30, short)
+
+/* IOCTLs for APPs */
+#define ECS_IOCTL_APP_SET_MFLAG _IOW(AKMIO, 0x11, short)
+#define ECS_IOCTL_APP_GET_MFLAG _IOW(AKMIO, 0x12, short)
+#define ECS_IOCTL_APP_SET_AFLAG _IOW(AKMIO, 0x13, short)
+#define ECS_IOCTL_APP_GET_AFLAG _IOR(AKMIO, 0x14, short)
+#define ECS_IOCTL_APP_SET_DELAY _IOW(AKMIO, 0x18, short)
+#define ECS_IOCTL_APP_GET_DELAY ECS_IOCTL_GET_DELAY
+/* Set raw magnetic vector flag */
+#define ECS_IOCTL_APP_SET_MVFLAG _IOW(AKMIO, 0x19, short)
+/* Get raw magnetic vector flag */
+#define ECS_IOCTL_APP_GET_MVFLAG _IOR(AKMIO, 0x1A, short)
+#define ECS_IOCTL_APP_SET_TFLAG _IOR(AKMIO, 0x15, short)
+
+
+struct akm8975_platform_data {
+ int intr;
+
+ int (*init)(void);
+ void (*exit)(void);
+ int (*power_on)(void);
+ int (*power_off)(void);
+};
+
+#endif
+
--
1.7.0.4
-----------------------------------------------------------------------------------
This email message is for the sole use of the intended recipient(s) and may contain
confidential information. Any unauthorized review, use, disclosure or distribution
is prohibited. If you are not the intended recipient, please contact the sender by
reply email and destroy all copies of the original message.
-----------------------------------------------------------------------------------
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
