Re: [PATCH] i2c/highlander: remover superflous variable

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue,  2 Feb 2010 13:17:43 +0100, Wolfram Sang wrote:
> When cppcheck found this flaw
> 
> [./i2c/busses/i2c-highlander.c:284]: (style) Warning - using char variable in bit operation
> 
> it was noted that the 'read'-variable could just be removed as read_write can
> only be 0 or 1 anyhow. So, we remove the flaw by simplifying the code.
> 
> Reported-by: d binderman <dcb314@xxxxxxxxxxx>
> Signed-off-by: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
> Cc: Paul Mundt <lethal@xxxxxxxxxxxx>
> Cc: Jean Delvare <khali@xxxxxxxxxxxx>
> Cc: Ben Dooks <ben-linux@xxxxxxxxx>
> ---
> 
> There was no patch following the original report, so I picked it up. Not
> tested, due to no hardware.
> 
> Jean, I put you on CC as you commented on the original mail, although it is
> more an embedded driver.
> 
>  drivers/i2c/busses/i2c-highlander.c |    5 ++---
>  1 files changed, 2 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-highlander.c b/drivers/i2c/busses/i2c-highlander.c
> index 87ecace..db290b9 100644
> --- a/drivers/i2c/busses/i2c-highlander.c
> +++ b/drivers/i2c/busses/i2c-highlander.c
> @@ -281,7 +281,6 @@ static int highlander_i2c_smbus_xfer(struct i2c_adapter *adap, u16 addr,
>  				  union i2c_smbus_data *data)
>  {
>  	struct highlander_i2c_dev *dev = i2c_get_adapdata(adap);
> -	int read = read_write & I2C_SMBUS_READ;
>  	u16 tmp;
>  
>  	init_completion(&dev->cmd_complete);
> @@ -336,11 +335,11 @@ static int highlander_i2c_smbus_xfer(struct i2c_adapter *adap, u16 addr,
>  	highlander_i2c_done(dev);
>  
>  	/* Set slave address */
> -	iowrite16((addr << 1) | read, dev->base + SMSMADR);
> +	iowrite16((addr << 1) | read_write, dev->base + SMSMADR);
>  
>  	highlander_i2c_command(dev, command, dev->buf_len);
>  
> -	if (read)
> +	if (read_write)
>  		return highlander_i2c_read(dev);
>  	else
>  		return highlander_i2c_write(dev);

Acked-by: Jean Delvare <khali@xxxxxxxxxxxx>

Thanks Wolfram.

-- 
Jean Delvare
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux