RE: [PATCH 0/2] davinci i2c fixes for 2.6.31

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Murali,

On Thu, 2009-07-16 at 16:22 -0500, Karicheri, Muralidharan wrote:
> Philby,
> 
> I tried running this patch against 2.6.31.rc2 (davinci kernel tree). But I got a crash as I run the application which is given below....
> 
> In my case, time out happens when I kill the capture application using Cntrl-C. After Cnrtl-C, the mt9t031 i2c device couldn't be contacted by the host (during cleanup, i2c commands fails). When the application is run again, I get following outputs..
> 
> i2c_davinci i2c_davinci.1: timeout waiting for bus ready
> i2c_davinci i2c_davinci.1: timeout waiting for bus ready
> 
> Here are the complete log....
> 
> application running and pressed Cntrl-C ====>
> 
> time:105    frame:33
> time:105    frame:34vpfe-capture vpfe-capture: stream off failed in subdev
> 
> Running it again .....
> 
> root@xxxxxxxxxxxxxxx:/opt/git# ./fbdev_loopback -i2 -d0


I have now verified the code on a DM6446 and DM355, with
the ./fbdev_loopback test. I had to first do a #./i2cset -y 0 0x50 0x00
0x0000 w to kill the bus and then run the ./fbdev_loopback test to
recreate the issue. Recovery seems to happen with the new patch. Could
you try this out at your end, with the new patch?

Thanks and regards,
Philby

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux