From: Sonic Zhang <sonic.zhang@xxxxxxxxxx>
There isn't much point in managing our own custom timeout timer when the
completion interface already includes support for it. This makes the
resulting code much simpler and robust.
Signed-off-by: Sonic Zhang <sonic.zhang@xxxxxxxxxx>
Signed-off-by: Mike Frysinger <vapier@xxxxxxxxxx>
---
v2
- define timeout in jiffies as pointed out by Wolfram
drivers/i2c/busses/i2c-bfin-twi.c | 125 +++++++++++++++++++-----------------
1 files changed, 66 insertions(+), 59 deletions(-)
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
index b309ac2..d35c677 100644
--- a/drivers/i2c/busses/i2c-bfin-twi.c
+++ b/drivers/i2c/busses/i2c-bfin-twi.c
@@ -24,8 +24,6 @@
#include <asm/portmux.h>
#include <asm/irq.h>
-#define POLL_TIMEOUT (2 * HZ)
-
/* SMBus mode*/
#define TWI_I2C_MODE_STANDARD 1
#define TWI_I2C_MODE_STANDARDSUB 2
@@ -43,8 +41,6 @@ struct bfin_twi_iface {
int cur_mode;
int manual_stop;
int result;
- int timeout_count;
- struct timer_list timeout_timer;
struct i2c_adapter adap;
struct completion complete;
struct i2c_msg *pmsg;
@@ -168,16 +164,13 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
write_INT_MASK(iface, 0);
write_MASTER_CTL(iface, 0);
SSYNC();
- /* If it is a quick transfer, only address bug no data,
+ /* If it is a quick transfer, only address without data,
* not an err, return 1.
+ * If address is acknowledged return 1.
*/
- if (iface->writeNum == 0 && (mast_stat & BUFRDERR))
+ if ((iface->writeNum == 0 && (mast_stat & BUFRDERR))
+ || !(mast_stat & ANAK))
iface->result = 1;
- /* If address not acknowledged return -1,
- * else return 0.
- */
- else if (!(mast_stat & ANAK))
- iface->result = 0;
}
complete(&iface->complete);
return;
@@ -249,9 +242,9 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
write_INT_MASK(iface, 0);
write_MASTER_CTL(iface, 0);
SSYNC();
- complete(&iface->complete);
}
}
+ complete(&iface->complete);
}
/* Interrupt handler */
@@ -261,36 +254,15 @@ static irqreturn_t bfin_twi_interrupt_entry(int irq, void *dev_id)
unsigned long flags;
spin_lock_irqsave(&iface->lock, flags);
- del_timer(&iface->timeout_timer);
bfin_twi_handle_interrupt(iface);
spin_unlock_irqrestore(&iface->lock, flags);
return IRQ_HANDLED;
}
-static void bfin_twi_timeout(unsigned long data)
-{
- struct bfin_twi_iface *iface = (struct bfin_twi_iface *)data;
- unsigned long flags;
-
- spin_lock_irqsave(&iface->lock, flags);
- bfin_twi_handle_interrupt(iface);
- if (iface->result == 0) {
- iface->timeout_count--;
- if (iface->timeout_count > 0) {
- iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
- add_timer(&iface->timeout_timer);
- } else {
- iface->result = -1;
- complete(&iface->complete);
- }
- }
- spin_unlock_irqrestore(&iface->lock, flags);
-}
-
/*
- * Generic i2c master transfer entrypoint
+ * One i2c master transfer
*/
-static int bfin_twi_master_xfer(struct i2c_adapter *adap,
+static int bfin_twi_do_master_xfer(struct i2c_adapter *adap,
struct i2c_msg *msgs, int num)
{
struct bfin_twi_iface *iface = adap->algo_data;
@@ -318,7 +290,6 @@ static int bfin_twi_master_xfer(struct i2c_adapter *adap,
iface->transPtr = pmsg->buf;
iface->writeNum = iface->readNum = pmsg->len;
iface->result = 0;
- iface->timeout_count = 10;
init_completion(&(iface->complete));
/* Set Transmit device address */
write_MASTER_ADDR(iface, pmsg->addr);
@@ -357,30 +328,49 @@ static int bfin_twi_master_xfer(struct i2c_adapter *adap,
iface->manual_stop = 1;
}
- iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
- add_timer(&iface->timeout_timer);
-
/* Master enable */
write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN |
((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) |
((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ > 100) ? FAST : 0));
SSYNC();
- wait_for_completion(&iface->complete);
-
- rc = iface->result;
+ while (!iface->result) {
+ if (!wait_for_completion_timeout(&iface->complete,
+ adap->timeout)) {
+ iface->result = -1;
+ dev_err(&adap->dev, "master transfer timeout\n");
+ }
+ }
- if (rc == 1)
- return num;
+ if (iface->result == 1)
+ rc = iface->cur_msg + 1;
else
- return rc;
+ rc = iface->result;
+
+ return rc;
}
/*
- * SMBus type transfer entrypoint
+ * Generic i2c master transfer entrypoint
*/
+static int bfin_twi_master_xfer(struct i2c_adapter *adap,
+ struct i2c_msg *msgs, int num)
+{
+ int i, ret = 0;
-int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
+ for (i = 0; i < adap->retries; i++) {
+ ret = bfin_twi_do_master_xfer(adap, msgs, num);
+ if (ret > 0)
+ break;
+ }
+
+ return ret;
+}
+
+/*
+ * One I2C SMBus transfer
+ */
+int bfin_twi_do_smbus_xfer(struct i2c_adapter *adap, u16 addr,
unsigned short flags, char read_write,
u8 command, int size, union i2c_smbus_data *data)
{
@@ -468,7 +458,6 @@ int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
iface->manual_stop = 0;
iface->read_write = read_write;
iface->command = command;
- iface->timeout_count = 10;
init_completion(&(iface->complete));
/* FIFO Initiation. Data in FIFO should be discarded before
@@ -485,9 +474,6 @@ int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
write_MASTER_ADDR(iface, addr);
SSYNC();
- iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
- add_timer(&iface->timeout_timer);
-
switch (iface->cur_mode) {
case TWI_I2C_MODE_STANDARDSUB:
write_XMT_DATA8(iface, iface->command);
@@ -549,10 +535,8 @@ int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
else if (iface->readNum > 255) {
write_MASTER_CTL(iface, 0xff << 6);
iface->manual_stop = 1;
- } else {
- del_timer(&iface->timeout_timer);
+ } else
break;
- }
}
}
write_INT_MASK(iface, MCOMP | MERR |
@@ -568,7 +552,13 @@ int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
}
SSYNC();
- wait_for_completion(&iface->complete);
+ while (!iface->result) {
+ if (!wait_for_completion_timeout(&iface->complete,
+ adap->timeout)) {
+ iface->result = -1;
+ dev_err(&adap->dev, "smbus transfer timeout\n");
+ }
+ }
rc = (iface->result >= 0) ? 0 : -1;
@@ -576,6 +566,25 @@ int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
}
/*
+ * Generic I2C SMBus transfer entrypoint
+ */
+int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
+ unsigned short flags, char read_write,
+ u8 command, int size, union i2c_smbus_data *data)
+{
+ int i, ret = 0;
+
+ for (i = 0; i < adap->retries; i++) {
+ ret = bfin_twi_do_smbus_xfer(adap, addr, flags,
+ read_write, command, size, data);
+ if (ret == 0)
+ break;
+ }
+
+ return ret;
+}
+
+/*
* Return what the adapter supports
*/
static u32 bfin_twi_functionality(struct i2c_adapter *adap)
@@ -666,10 +675,6 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
goto out_error_no_irq;
}
- init_timer(&(iface->timeout_timer));
- iface->timeout_timer.function = bfin_twi_timeout;
- iface->timeout_timer.data = (unsigned long)iface;
-
p_adap = &iface->adap;
p_adap->nr = pdev->id;
strlcpy(p_adap->name, pdev->name, sizeof(p_adap->name));
@@ -677,6 +682,8 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
p_adap->algo_data = iface;
p_adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
p_adap->dev.parent = &pdev->dev;
+ p_adap->timeout = 5 * HZ;
+ p_adap->retries = 3;
rc = peripheral_request_list(pin_req[pdev->id], "i2c-bfin-twi");
if (rc) {
--
1.6.5.rc2
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
