Re: [PATCH v3 4/6] hwmon: (pmbus/core) clear faults after setting smbalert mask

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri 01 Nov 2024 at 08:10, Guenter Roeck <linux@xxxxxxxxxxxx> wrote:

> On Thu, Oct 24, 2024 at 08:10:38PM +0200, Jerome Brunet wrote:
>> pmbus_write_smbalert_mask() ignores the errors if the chip can't set
>> smbalert mask the standard way. It is not necessarily a problem for the irq
>> support if the chip is otherwise properly setup but it may leave an
>> uncleared fault behind.
>> 
>> pmbus_core will pick the fault on the next register_check(). The register
>> check will fails regardless of the actual register support by the chip.
>> 
>> This leads to missing attributes or debugfs entries for chips that should
>> provide them.
>> 
>> We cannot rely on register_check() as PMBUS_SMBALERT_MASK may be read-only.
>> 
>> Unconditionally clear the page fault after setting PMBUS_SMBALERT_MASK to
>> avoid the problem.
>> 
>> Suggested-by: Guenter Roeck <linux@xxxxxxxxxxxx>
>> Fixes: 221819ca4c36 ("hwmon: (pmbus/core) Add interrupt support")
>> Signed-off-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
>> ---
>>  drivers/hwmon/pmbus/pmbus_core.c | 7 ++++++-
>>  1 file changed, 6 insertions(+), 1 deletion(-)
>> 
>> diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
>> index ce697ca03de01c0e5a352f8f6b72671137721868..a0a397d571caa1a6620ef095f9cf63d94e8bda1d 100644
>> --- a/drivers/hwmon/pmbus/pmbus_core.c
>> +++ b/drivers/hwmon/pmbus/pmbus_core.c
>> @@ -3346,7 +3346,12 @@ static int pmbus_regulator_notify(struct pmbus_data *data, int page, int event)
>>  
>>  static int pmbus_write_smbalert_mask(struct i2c_client *client, u8 page, u8 reg, u8 val)
>>  {
>> -	return _pmbus_write_word_data(client, page, PMBUS_SMBALERT_MASK, reg | (val << 8));
>> +	int ret;
>> +
>> +	ret = _pmbus_write_word_data(client, page, PMBUS_SMBALERT_MASK, reg | (val << 8));
>> +	pmbus_clear_fault_page(client, -1);
>
> Why -1 and not page ?

The idea was to clear the fault on the page we are on, basically just skipping
setting the page again.

I'll change to 'page'

>
> Guenter

-- 
Jerome




[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux