On 2024-06-01 06:48:29+0000, Guenter Roeck wrote:
<snip>
> Makes sense. Another question:
>
> This:
>
> + struct nvmem_config nvmem_config = {
> + .type = NVMEM_TYPE_EEPROM,
> + .name = dev_name(dev),
> + .id = NVMEM_DEVID_AUTO,
>
> results in:
>
> $ ls /sys/bus/nvmem/devices
> 0-00501 0-00512 0-00523 0-00534 cmos_nvram0
> ^^^^^^^ ^^^^^^^ ^^^^^^^ ^^^^^^^
>
> which really doesn't look good. My current plan is to go with NVMEM_DEVID_NONE,
> which results in
>
> $ ls /sys/bus/nvmem/devices
> 0-0050 0-0051 0-0052 0-0053 cmos_nvram0
>
> We could also used fixed strings, but "spd" results in "spd[1-4]" which
> I think would be a bit misleading since the DDR3/4 SPD data format is
> different, and "spd5118" would result in "spd5118[1-4]" which again would
> look odd. Any suggestions ?
In order of descending, personal preference:
* spd-ddr5-[0-3] (.id = client->address - 0x50)
* spd-ddr5-[0-3] (NVMEM_DEVID_AUTO)
* Same with only "ddr5-"
* spd5118-[0-3]
* Your proposal from above
* nvmem[0-3] (default handling)
* 0-0050-[0-3]
Also can't a user of the eeprom already figure out which kind of module
it is by looking at the eeprom contents?
The first few bytes used for that seem to be compatible between at least
DDR4 and DDR5.
So using plain spd[1-4] could be enough.
