Re: [PATCH RFC 3/7] hwmon: (da9052) Use devm_regulator_get_enable_get_voltage()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 3/28/24 07:20, Jonathan Cameron wrote:
On Wed, 27 Mar 2024 18:18:52 -0500
David Lechner <dlechner@xxxxxxxxxxxx> wrote:

We can reduce boilerplate code by using
devm_regulator_get_enable_get_voltage().

Signed-off-by: David Lechner <dlechner@xxxxxxxxxxxx>

A few comments inline, but nothing substantial.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
---
  drivers/hwmon/da9052-hwmon.c | 33 +++++++--------------------------
  1 file changed, 7 insertions(+), 26 deletions(-)

diff --git a/drivers/hwmon/da9052-hwmon.c b/drivers/hwmon/da9052-hwmon.c
index 2bd7ae8100d7..70e7bc72e980 100644
--- a/drivers/hwmon/da9052-hwmon.c
+++ b/drivers/hwmon/da9052-hwmon.c
@@ -26,7 +26,6 @@ struct da9052_hwmon {
  	struct mutex		hwmon_lock;
  	bool			tsi_as_adc;
  	int			tsiref_mv;
-	struct regulator	*tsiref;
  	struct completion	tsidone;
  };
@@ -414,32 +413,19 @@ static int da9052_hwmon_probe(struct platform_device *pdev)
  		device_property_read_bool(pdev->dev.parent, "dlg,tsi-as-adc");
if (hwmon->tsi_as_adc) {
-		hwmon->tsiref = devm_regulator_get(pdev->dev.parent, "tsiref");
-		if (IS_ERR(hwmon->tsiref)) {
-			err = PTR_ERR(hwmon->tsiref);
-			dev_err(&pdev->dev, "failed to get tsiref: %d", err);
+		err = devm_regulator_get_enable_get_voltage(pdev->dev.parent,
+							    "tsiref");
+		if (err < 0)
  			return err;
-		}
-
-		err = regulator_enable(hwmon->tsiref);
-		if (err)
-			return err;
-
-		hwmon->tsiref_mv = regulator_get_voltage(hwmon->tsiref);
-		if (hwmon->tsiref_mv < 0) {
-			err = hwmon->tsiref_mv;
-			goto exit_regulator;
-		}
/* convert from microvolt (DT) to millivolt (hwmon) */
-		hwmon->tsiref_mv /= 1000;
+		hwmon->tsiref_mv = err / 1000;


Using a variable called err for a good value is a bit ugly but fair enough if that
is precedence in this driver.


It isn't. The existing code assigns the return value from regulator_get_voltage()
to hwmon->tsiref_mv and then evaluates it. I would not oppose introducing a variable
such as tsiref_uv, but not the misuse of 'err'. I am not going to accept the code
as suggested. It is bad style, and it would invite others to use it as precedent
when trying to introduce similar code.

  }
@@ -483,10 +466,8 @@ static void da9052_hwmon_remove(struct platform_device *pdev)
  {
  	struct da9052_hwmon *hwmon = platform_get_drvdata(pdev);
- if (hwmon->tsi_as_adc) {
+	if (hwmon->tsi_as_adc)
  		da9052_free_irq(hwmon->da9052, DA9052_IRQ_TSIREADY, hwmon);
Superficially looks like devm_da9052_request_irq could be added that
uses devm_request_threaded_irq() to allow dropping this remaining handling.


That should be a separate series of patches. A local solution might be
to use devm_add_action_or_reset(), but that should also be a separate patch.

Thanks,
Guenter





[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux