Re: [PATCH net-next v2 0/5] TSN auto negotiation between 1G and 2.5G

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Aug 04, 2023 at 04:45:22PM +0800, Choong Yong Liang wrote:
> Intel platforms’ integrated Gigabit Ethernet controllers support
> 2.5Gbps mode statically using BIOS programming. In the current
> implementation, the BIOS menu provides an option to select between
> 10/100/1000Mbps and 2.5Gbps modes. Based on the selection, the BIOS
> programs the Phase Lock Loop (PLL) registers. The BIOS also read the
> TSN lane registers from Flexible I/O Adapter (FIA) block and provided
> 10/100/1000Mbps/2.5Gbps information to the stmmac driver. But
> auto-negotiation between 10/100/1000Mbps and 2.5Gbps is not allowed.
> The new proposal is to support auto-negotiation between 10/100/1000Mbps
> and 2.5Gbps . Auto-negotiation between 10, 100, 1000Mbps will use
> in-band auto negotiation. Auto-negotiation between 10/100/1000Mbps and
> 2.5Gbps will work as the following proposed flow, the stmmac driver reads
> the PHY link status registers then identifies the negotiated speed.
> Based on the speed stmmac driver will identify TSN lane registers from
> FIA then send IPC command to the Power Management controller (PMC)
> through PMC driver/API. PMC will act as a proxy to programs the
> PLL registers.

Have you considered using out of band for all link modes? You might
end up with a cleaner architecture, and not need any phylink/phylib
hacks.

	Andrew



[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux