On Thu, 06 Apr 2023 19:43:26 +0300, Daniel Matyas wrote: > MAX31827 is a low-power temperature switch with I2C interface. > > The device is a ±1°C accuracy from -40°C to +125°C > (12 bits) local temperature switch and sensor with I2C/SM- > Bus interface. The combination of small 6-bump wafer-lev- > el package (WLP) and high accuracy makes this temper- > ature sensor/switch ideal for a wide range of applications. > > Signed-off-by: Daniel Matyas <daniel.matyas@xxxxxxxxxx> > --- > .../bindings/hwmon/adi,max31827.yaml | 48 +++++++++++++++++++ > .../devicetree/bindings/trivial-devices.yaml | 2 + > MAINTAINERS | 7 +++ > 3 files changed, 57 insertions(+) > create mode 100644 Documentation/devicetree/bindings/hwmon/adi,max31827.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: ./Documentation/devicetree/bindings/hwmon/adi,max31827.yaml:48:4: [error] no new line character at the end of file (new-line-at-end-of-file) dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/hwmon/adi,max31827.example.dtb: max31827@42: 'vref-supply' does not match any of the regexes: 'pinctrl-[0-9]+' From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/trivial-devices.yaml doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230406164331.6557-2-daniel.matyas@xxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
