The driver was tested on Raspberry Pi 4 Model B. The implemented functionalities of it are: reading a 1shot input value and changing and reading the overtemperature and undertemperature alarm and hysteresis values. The read values are raw: signed 16 bit int format. To obtain the real value one must multiply the value with 0.0625. Daniel Matyas (2): dt-bindings: hwmon: add MAX31827 hwmon: max31827: add MAX31827 driver .../bindings/hwmon/adi,max31827.yaml | 48 ++++ .../devicetree/bindings/trivial-devices.yaml | 2 + MAINTAINERS | 8 + drivers/hwmon/Kconfig | 11 + drivers/hwmon/Makefile | 1 + drivers/hwmon/max31827.c | 240 ++++++++++++++++++ 6 files changed, 310 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/adi,max31827.yaml create mode 100644 drivers/hwmon/max31827.c -- 2.34.1
