MAX31827 is a low-power temperature switch with I2C interface. The device is a ±1°C accuracy from -40°C to +125°C (12 bits) local temperature switch and sensor with I2C/SM- Bus interface. The combination of small 6-bump wafer-lev- el package (WLP) and high accuracy makes this temper- ature sensor/switch ideal for a wide range of applications. Signed-off-by: Daniel Matyas <daniel.matyas@xxxxxxxxxx> --- MAINTAINERS | 1 + drivers/hwmon/Kconfig | 11 ++ drivers/hwmon/Makefile | 1 + drivers/hwmon/max31827.c | 240 +++++++++++++++++++++++++++++++++++++++ 4 files changed, 253 insertions(+) create mode 100644 drivers/hwmon/max31827.c diff --git a/MAINTAINERS b/MAINTAINERS index 549cea6bc340..63c17195a99b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12541,6 +12541,7 @@ L: linux-hwmon@xxxxxxxxxxxxxxx S: Supported W: http://ez.analog.com/community/linux-device-drivers F: Documentation/devicetree/bindings/hwmon/adi,max31827.yaml +F: drivers/hwmon/max31827.c MAX6650 HARDWARE MONITOR AND FAN CONTROLLER DRIVER L: linux-hwmon@xxxxxxxxxxxxxxx diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 5b3b76477b0e..80c44a787d42 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -2401,4 +2401,15 @@ config SENSORS_ASUS_EC endif # ACPI +config MAX31827 + tristate "MAX31827 low-power temperature switch" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for MAX31827 + low-power temperature switch and sensor connected with I2C. + + This driver can also be built as a module. If so, the module + will be called max31827. + endif # HWMON diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 88712b5031c8..d00f0a1e73f6 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -224,3 +224,4 @@ obj-$(CONFIG_PMBUS) += pmbus/ ccflags-$(CONFIG_HWMON_DEBUG_CHIP) := -DDEBUG +obj-$(CONFIG_MAX31827) += max31827.o diff --git a/drivers/hwmon/max31827.c b/drivers/hwmon/max31827.c new file mode 100644 index 000000000000..1c79bcf12d78 --- /dev/null +++ b/drivers/hwmon/max31827.c @@ -0,0 +1,240 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * max31827.c - Support for Maxim Low-Power Switch + * + * Copyright (c) 2023 Daniel Matyas <daniel.matyas@xxxxxxxxxx> + */ + +#include <linux/bitfield.h> +#include <linux/bits.h> +#include <linux/device.h> +#include <linux/of.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> + +#define MAX31827_T_REG 0x0 +#define MAX31827_CONFIGURATION_REG 0x2 +#define MAX31827_TH_REG 0x4 +#define MAX31827_TL_REG 0x6 +#define MAX31827_TH_HYST_REG 0x8 +#define MAX31827_TL_HYST_REG 0xA + +#define MAX31827_CONFIGURATION_1SHOT_MASK BIT(0) +#define MAX31827_CONFIGURATION_CNV_RATE_MASK GENMASK(3, 1) +#define MAX31827_CONFIGURATION_RESOL_MASK GENMASK(7, 6) +#define MAX31827_CONFIGURATION_U_TEMP_STAT_MASK BIT(14) +#define MAX31827_CONFIGURATION_O_TEMP_STAT_MASK BIT(15) + +#define MAX31827_CNV_SHUTDOWN 0x0 +#define MAX31827_CNV_1_DIV_64_HZ 0x1 +#define MAX31827_CNV_1_DIV_32_HZ 0x2 +#define MAX31827_CNV_1_DIV_16_HZ 0x3 +#define MAX31827_CNV_1_DIV_4_HZ 0x4 +#define MAX31827_CNV_1_HZ 0x5 +#define MAX31827_CNV_4_HZ 0x6 +#define MAX31827_CNV_8_HZ 0x7 + +#define MAX31827_1SHOT_EN(x) ((x) ? BIT(0) : 0) + +struct max31827_state { + struct regmap *regmap; + struct i2c_client *client; +}; + +static const struct regmap_config max31827_regmap = { + .reg_bits = 8, + .val_bits = 16, + .max_register = 0xA, +}; + +static umode_t max31827_is_visible(const void *state, + enum hwmon_sensor_types type, + u32 attr, int channel) +{ + if (type == hwmon_temp) { + switch (attr) { + case hwmon_temp_enable: + case hwmon_temp_max: + case hwmon_temp_min: + case hwmon_temp_max_hyst: + case hwmon_temp_min_hyst: + return 0644; + case hwmon_temp_input: + return 0444; + } + } + + return 0; +} + +static int max31827_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) +{ + struct max31827_state *st; + unsigned int uval; + int ret; + + st = dev_get_drvdata(dev); + if (IS_ERR(st)) + return PTR_ERR(st); + + if (type != hwmon_temp) + return -EOPNOTSUPP; + + switch (attr) { + case hwmon_temp_enable: + ret = regmap_read(st->regmap, MAX31827_CONFIGURATION_REG, &uval); + uval = FIELD_GET(MAX31827_CONFIGURATION_1SHOT_MASK, uval); + break; + + case hwmon_temp_input: + ret = regmap_read(st->regmap, MAX31827_T_REG, &uval); + break; + + case hwmon_temp_max: + ret = regmap_read(st->regmap, MAX31827_TH_REG, &uval); + break; + + case hwmon_temp_max_hyst: + ret = regmap_read(st->regmap, MAX31827_TH_HYST_REG, &uval); + break; + case hwmon_temp_min: + ret = regmap_read(st->regmap, MAX31827_TL_REG, &uval); + break; + + case hwmon_temp_min_hyst: + ret = regmap_read(st->regmap, MAX31827_TL_HYST_REG, &uval); + break; + + default: + ret = -EOPNOTSUPP; + } + + if (ret) + return ret; + + *val = uval; + + return 0; +} + +static int max31827_write(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long val) +{ + struct max31827_state *st = dev_get_drvdata(dev); + + if (IS_ERR(st)) + return PTR_ERR(st); + + switch (attr) { + case hwmon_temp_enable: + if (val >> 1) + return -EOPNOTSUPP; + + return regmap_update_bits(st->regmap, MAX31827_CONFIGURATION_REG, + MAX31827_CONFIGURATION_1SHOT_MASK, + MAX31827_1SHOT_EN(val)); + + case hwmon_temp_max: + return regmap_write(st->regmap, MAX31827_TH_REG, val); + + case hwmon_temp_max_hyst: + return regmap_write(st->regmap, MAX31827_TH_HYST_REG, val); + + case hwmon_temp_min: + return regmap_write(st->regmap, MAX31827_TL_REG, val); + + case hwmon_temp_min_hyst: + return regmap_write(st->regmap, MAX31827_TL_HYST_REG, val); + } + + return -EOPNOTSUPP; +} + +static int max31827_init_client(struct max31827_state *st) +{ + return regmap_update_bits(st->regmap, MAX31827_CONFIGURATION_REG, + MAX31827_CONFIGURATION_CNV_RATE_MASK | + MAX31827_CONFIGURATION_1SHOT_MASK, + MAX31827_1SHOT_EN(1)); +} + +static const struct hwmon_channel_info *max31827_info[] = { + HWMON_CHANNEL_INFO(temp, HWMON_T_ENABLE | HWMON_T_INPUT | HWMON_T_MIN | + HWMON_T_MIN_HYST | HWMON_T_MAX | HWMON_T_MAX_HYST), + NULL, +}; + +static const struct hwmon_ops max31827_hwmon_ops = { + .is_visible = max31827_is_visible, + .read = max31827_read, + .write = max31827_write, +}; + +static const struct hwmon_chip_info max31827_chip_info = { + .ops = &max31827_hwmon_ops, + .info = max31827_info, +}; + +static int max31827_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct device *hwmon_dev; + struct max31827_state *st; + int ret; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) + return -EOPNOTSUPP; + + st = devm_kzalloc(dev, sizeof(struct max31827_state), GFP_KERNEL); + if (!st) + return -ENOMEM; + + st->client = client; + + st->regmap = devm_regmap_init_i2c(client, &max31827_regmap); + if (IS_ERR(st->regmap)) + return dev_err_probe(dev, PTR_ERR(st->regmap), + "Failed to allocate regmap: %ld\n", + PTR_ERR(st->regmap)); + + ret = max31827_init_client(st); + if (ret) + return ret; + + hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, st, + &max31827_chip_info, + NULL); + + return PTR_ERR_OR_ZERO(hwmon_dev); +} + +static const struct i2c_device_id max31827_i2c_ids[] = { + { .name = "max31827" }, + { } +}; +MODULE_DEVICE_TABLE(i2c, max31827_i2c_ids); + +static const struct of_device_id max31827_of_match[] = { + { .compatible = "max31827" }, + { } +}; +MODULE_DEVICE_TABLE(of, max31827_of_match); + +static struct i2c_driver max31827_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "max31827", + .of_match_table = max31827_of_match, + }, + .probe_new = max31827_probe, + .id_table = max31827_i2c_ids, +}; +module_i2c_driver(max31827_driver); + +MODULE_AUTHOR("Daniel Matyas <daniel.matyas@xxxxxxxxxx>"); +MODULE_DESCRIPTION("Maxim MAX31827 low-power temperature switch driver"); +MODULE_LICENSE("GPL"); -- 2.34.1
