Re: [PATCH 2/2] dt-bindings: rtc: add bindings for max313xx RTCs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 21/10/2022 09:05, Tilki, Ibrahim wrote:
>> On 21/10/2022 11:44:12+0000, Tilki, Ibrahim wrote:
>>>>> +  interrupt-names:
>>>>> +    description: |
>>>>> +      Name of the interrupt pin of the RTC used for IRQ. Not required for
>>>>> +      RTCs that only have single interrupt pin available. Some of the RTCs
>>>>> +      share interrupt pins with clock input/output pins.
>>>>> +    minItems: 1
>>>>> +    items:
>>>>> +      - enum: [INTA, INTB]
>>>>> +      - enum: [INTA, INTB]
>>>>> +
>>>>
>>>> I don't think this is right, what this is doing is essentially pinmuxing
>>>> interrupts versus clocks. What happens if you want INTB but this goes
>>>> directly to a PMIC instead of the SoC?
>>>> It is not something you can express with your current bindings.
>>>>
>>>
>>> Why would a user want INTB when it is not connected to SoC?
>>> User can specify none, either one or both of the interrupt pins.
>>> I don't see what the problem here is.
>>>
>>
>> the interrupt pin may be connected to a PMIC that is able to start or
>> wake up the platform. In that case, the user would not have any
>> interrupt-names and your driver will fail to mux the interrupt on INTB.
>> Please fix.
> 
> Interrupt muxing depends on the clock configuration, not the interrupt-names property.
> Devices don't support muxing the alarm interrupt independently.
> 
> For example in the case of max31329, alarm interrupt is muxed into INTA by default.
> Alarm interrupt is muxed into INTB pin if and only if clkin is enabled.\

Just to be sure: are you now describing hardware or Linux driver behavior?

> 
> This means that if a user wants the alarm interrupt on INTB pin, they have to
> provide a clock input through "clocks" property. If that is the case, they can provide
> an interrupt for INTB pin, otherwise the alarm feature of the rtc gets disabled.
> 
> Side note: Some devices have 2 Alarms but Alarm2 does not have a register for
> matching "seconds" so only Alarm1 is used by the driver.

Best regards,
Krzysztof




[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux