Re: [PATCH 2/2] dt-bindings: rtc: add bindings for max313xx RTCs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 19/10/2022 16:39:10+0300, Ibrahim Tilki wrote:
> Devicetree binding documentation for Analog Devices MAX313XX RTCs
> 
> Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki@xxxxxxxxxx>
> Signed-off-by: Zeynep Arslanbenzer <Zeynep.Arslanbenzer@xxxxxxxxxx>
> ---
>  .../devicetree/bindings/rtc/adi,max313xx.yaml | 163 ++++++++++++++++++
>  1 file changed, 163 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/rtc/adi,max313xx.yaml
> 
> diff --git a/Documentation/devicetree/bindings/rtc/adi,max313xx.yaml b/Documentation/devicetree/bindings/rtc/adi,max313xx.yaml
> new file mode 100644
> index 000000000..1aa491799
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/adi,max313xx.yaml
> @@ -0,0 +1,163 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright 2022 Analog Devices Inc.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/rtc/adi,max313xx.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices MAX313XX series I2C RTC driver
> +
> +maintainers:
> +  - Ibrahim Tilki <Ibrahim.Tilki@xxxxxxxxxx>
> +  - Zeynep Arslanbenzer <Zeynep.Arslanbenzer@xxxxxxxxxx>
> +
> +description: Bindings for the Analog Devices MAX313XX series RTCs.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - adi,max31328
> +      - adi,max31329
> +      - adi,max31331
> +      - adi,max31334
> +      - adi,max31341
> +      - adi,max31342
> +      - adi,max31343
> +
> +  reg:
> +    description: I2C address of the RTC
> +    items:
> +      - enum: [0x68, 0x69]
> +
> +  interrupts:
> +    minItems: 1
> +    maxItems: 2
> +
> +  interrupt-names:
> +    description: |
> +      Name of the interrupt pin of the RTC used for IRQ. Not required for
> +      RTCs that only have single interrupt pin available. Some of the RTCs
> +      share interrupt pins with clock input/output pins.
> +    minItems: 1
> +    items:
> +      - enum: [INTA, INTB]
> +      - enum: [INTA, INTB]
> +

I don't think this is right, what this is doing is essentially pinmuxing
interrupts versus clocks. What happens if you want INTB but this goes
directly to a PMIC instead of the SoC?
It is not something you can express with your current bindings.


> +  "#clock-cells":
> +    description: |
> +      RTC can be used as a clock source through its clock output pin when
> +      supplied.
> +    const: 0
> +
> +  clocks:
> +    description: |
> +      RTC uses this clock for clock input when supplied. Clock has to provide
> +      one of these four frequencies: 1Hz, 50Hz, 60Hz or 32.768kHz.
> +    maxItems: 1
> +
> +  trickle-diode-disable: true
> +
> +  trickle-resistor-ohms:
> +    description: Enables trickle charger with specified resistor value.
> +    enum: [3000, 6000, 11000]
> +
> +  wakeup-source: true
> +
> +additionalProperties: false
> +
> +allOf:
> +  - $ref: rtc.yaml#
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - adi,max31328
> +              - adi,max31342
> +
> +    then:
> +      properties:
> +        trickle-diode-disable: false
> +        trickle-resistor-ohms: false
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - adi,max31328
> +              - adi,max31331
> +              - adi,max31334
> +              - adi,max31343
> +
> +    then:
> +      properties:
> +        clocks: false
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - adi,max31341
> +              - adi,max31342
> +
> +    then:
> +      properties:
> +        reg:
> +          items:
> +            - const: 0x69
> +
> +    else:
> +      properties:
> +        reg:
> +          items:
> +            - const: 0x68
> +
> +required:
> +  - compatible
> +  - reg
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        rtc@68 {
> +            reg = <0x68>;
> +            compatible = "adi,max31329";
> +            clocks = <&clkin>;
> +            interrupt-parent = <&gpio>;
> +            interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
> +            interrupt-names = "INTB";
> +        };
> +    };
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        rtc@68 {
> +            reg = <0x68>;
> +            compatible = "adi,max31331";
> +            #clock-cells = <0>;
> +            interrupt-parent = <&gpio>;
> +            interrupts = <25 IRQ_TYPE_EDGE_FALLING>, <26 IRQ_TYPE_EDGE_FALLING>;
> +            interrupt-names = "INTA", "INTB";
> +        };
> +    };
> +  - |
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        rtc@69 {
> +            reg = <0x69>;
> +            compatible = "adi,max31341";
> +            #clock-cells = <0>;
> +            clocks = <&clkin>;
> +        };
> +    };
> -- 
> 2.25.1
> 

-- 
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com



[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux