On 9/2/22 01:29, Hans de Goede wrote:
Hi Guenter, Arvid,
On 9/2/22 00:27, Guenter Roeck wrote:
On 9/1/22 14:58, Arvid Norlander wrote:
This expands on the previous commit, exporting the fan RPM via hwmon.
This will look something like the following when using the "sensors"
command from lm_sensors:
toshiba_acpi_sensors-acpi-0
Adapter: ACPI interface
fan1: 0 RPM
Signed-off-by: Arvid Norlander <lkml@xxxxxxxxx>
---
drivers/platform/x86/Kconfig | 1 +
drivers/platform/x86/toshiba_acpi.c | 72 +++++++++++++++++++++++++++++
2 files changed, 73 insertions(+)
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index f2f98e942cf2..4d0d2676939a 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -797,6 +797,7 @@ config ACPI_TOSHIBA
depends on INPUT
depends on SERIO_I8042 || SERIO_I8042 = n
depends on ACPI_VIDEO || ACPI_VIDEO = n
+ depends on HWMON || HWMON = n
depends on RFKILL || RFKILL = n
depends on IIO
select INPUT_SPARSEKMAP
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index 02e3522f4eeb..a976dfb97a5e 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -46,6 +46,10 @@
#include <linux/toshiba.h>
#include <acpi/video.h>
+#ifdef CONFIG_HWMON
+#include <linux/hwmon.h>
+#endif
ifdef not needed here.
Ack.
+
MODULE_AUTHOR("John Belmonte");
MODULE_DESCRIPTION("Toshiba Laptop ACPI Extras Driver");
MODULE_LICENSE("GPL");
@@ -171,6 +175,9 @@ struct toshiba_acpi_dev {
struct miscdevice miscdev;
struct rfkill *wwan_rfk;
struct iio_dev *indio_dev;
+#ifdef CONFIG_HWMON
+ struct device *hwmon_device;
+#endif
int force_fan;
int last_key_event;
@@ -2941,6 +2948,54 @@ static int toshiba_acpi_setup_backlight(struct toshiba_acpi_dev *dev)
return 0;
}
+/* HWMON support for fan */
+#ifdef CONFIG_HWMON
This should be #if IS_REACHABLE(CONFIG_HWMON)
Actually that should be IS_ENABLED since you suggested that
Arvid should use:
depends on HWMON || HWMON = n
Yes, you are absolutely correct.
Thanks,
Guenter
