Re: [PATCH v3 1/2] Documentation: devicetree: update bindings for tps23861

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Aug 25, 2022 at 05:07:45PM +0200, Robert Marko wrote:
> On Thu, Aug 25, 2022 at 5:02 PM Guenter Roeck <linux@xxxxxxxxxxxx> wrote:
> >
> > On Thu, Aug 25, 2022 at 04:37:36PM +0200, Andreas Böhler wrote:
> > > The tps23861 driver does not initialize the chip and relies on it being
> > > in auto-mode by default. On some devices, these controllers default to
> > > OFF-Mode and hence cannot be used at all.
> > >
> > > This brings minimal support for initializing the controller in a user-
> > > defined mode.
> > >
> > > Signed-off-by: Andreas Böhler <dev@xxxxxxxxxxx>
> >
> > nack for the series, sorry. The suggested properties are not hardware
> > monitoring but phy properties. There should be a separate phy driver
> > to manage those.
> >
> > Also, as mentioned, the hwmon 'enable' attribute is abused to control
> > port functionality and should be removed.
> 
> Hi Guenter,
> Are you referring to an ethernet PHY driver or the generic PHY framework?
> 

Could be both, though ethernet phy sounds about right for me.
I don't know where/how similar chips are handled. hwmon is most definitey
the wrong place.

Guenter



[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux