Re: [PATCH 1/2] hwmon: (lm90) Add support for 2nd remote channel's offset register

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jun 07, 2022 at 08:35:03AM +0200, Slawomir Stepien wrote:
> From: Slawomir Stepien <slawomir.stepien@xxxxxxxxx>
> 
> The ADT7481 have LM90_HAVE_TEMP3 and LM90_HAVE_OFFSET flags, but the
> support of second remote channel's offset is missing. Add that
> implementation.
> 
> Signed-off-by: Slawomir Stepien <slawomir.stepien@xxxxxxxxx>

Applied to hwmon-next.

Thanks,
Guenter

> ---
> Changes since v1:
> * New functions lm90_get_temp_offset and lm90_set_temp_offset.
> * Use the same addresses to access remote channel 1 and 2 registers.
> * Use new lm90_temp_offset_index translation table.
> 
>  drivers/hwmon/lm90.c | 58 +++++++++++++++++++++++++++++++++++++-------
>  1 file changed, 49 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
> index a18aed5f96d1..ec885cb3ab92 100644
> --- a/drivers/hwmon/lm90.c
> +++ b/drivers/hwmon/lm90.c
> @@ -672,6 +672,7 @@ enum lm90_temp_reg_index {
>  	REMOTE2_TEMP,	/* max6695/96 only */
>  	REMOTE2_LOW,	/* max6695/96 only */
>  	REMOTE2_HIGH,	/* max6695/96 only */
> +	REMOTE2_OFFSET,
>  
>  	TEMP_REG_NUM
>  };
> @@ -1028,6 +1029,14 @@ static int lm90_update_limits(struct device *dev)
>  			return val;
>  		data->temp[REMOTE2_HIGH] = val << 8;
>  
> +		if (data->flags & LM90_HAVE_OFFSET) {
> +			val = lm90_read16(client, LM90_REG_REMOTE_OFFSH,
> +					  LM90_REG_REMOTE_OFFSL, false);
> +			if (val < 0)
> +				return val;
> +			data->temp[REMOTE2_OFFSET] = val;
> +		}
> +
>  		lm90_select_remote_channel(data, false);
>  	}
>  
> @@ -1298,6 +1307,7 @@ static int lm90_temp_get_resolution(struct lm90_data *data, int index)
>  			return data->resolution;
>  		return 8;
>  	case REMOTE_OFFSET:
> +	case REMOTE2_OFFSET:
>  	case REMOTE2_TEMP:
>  		return data->resolution;
>  	case LOCAL_TEMP:
> @@ -1428,6 +1438,36 @@ static int lm90_set_temphyst(struct lm90_data *data, long val)
>  	return lm90_write_reg(data->client, LM90_REG_TCRIT_HYST, data->temp_hyst);
>  }
>  
> +static int lm90_get_temp_offset(struct lm90_data *data, int index)
> +{
> +	int res = lm90_temp_get_resolution(data, index);
> +
> +	return lm90_temp_from_reg(0, data->temp[index], res);
> +}
> +
> +static int lm90_set_temp_offset(struct lm90_data *data, int index, int channel, long val)
> +{
> +	int err;
> +
> +	val = lm90_temp_to_reg(0, val, lm90_temp_get_resolution(data, index));
> +
> +	/* For ADT7481 we can use the same registers for remote channel 1 and 2 */
> +	if (channel > 1)
> +		lm90_select_remote_channel(data, true);
> +
> +	err = lm90_write16(data->client, LM90_REG_REMOTE_OFFSH, LM90_REG_REMOTE_OFFSL, val);
> +
> +	if (channel > 1)
> +		lm90_select_remote_channel(data, false);
> +
> +	if (err)
> +		return err;
> +
> +	data->temp[index] = val;
> +
> +	return 0;
> +}
> +
>  static const u8 lm90_temp_index[MAX_CHANNELS] = {
>  	LOCAL_TEMP, REMOTE_TEMP, REMOTE2_TEMP
>  };
> @@ -1448,6 +1488,10 @@ static const u8 lm90_temp_emerg_index[MAX_CHANNELS] = {
>  	LOCAL_EMERG, REMOTE_EMERG, REMOTE2_EMERG
>  };
>  
> +static const s8 lm90_temp_offset_index[MAX_CHANNELS] = {
> +	-1, REMOTE_OFFSET, REMOTE2_OFFSET
> +};
> +
>  static const u16 lm90_min_alarm_bits[MAX_CHANNELS] = { BIT(5), BIT(3), BIT(11) };
>  static const u16 lm90_max_alarm_bits[MAX_CHANNELS] = { BIT(6), BIT(4), BIT(12) };
>  static const u16 lm90_crit_alarm_bits[MAX_CHANNELS] = { BIT(0), BIT(1), BIT(9) };
> @@ -1519,8 +1563,7 @@ static int lm90_temp_read(struct device *dev, u32 attr, int channel, long *val)
>  		*val = lm90_get_temphyst(data, lm90_temp_emerg_index[channel], channel);
>  		break;
>  	case hwmon_temp_offset:
> -		*val = lm90_temp_from_reg(0, data->temp[REMOTE_OFFSET],
> -					  lm90_temp_get_resolution(data, REMOTE_OFFSET));
> +		*val = lm90_get_temp_offset(data, lm90_temp_offset_index[channel]);
>  		break;
>  	default:
>  		return -EOPNOTSUPP;
> @@ -1560,13 +1603,8 @@ static int lm90_temp_write(struct device *dev, u32 attr, int channel, long val)
>  				    channel, val);
>  		break;
>  	case hwmon_temp_offset:
> -		val = lm90_temp_to_reg(0, val,
> -				       lm90_temp_get_resolution(data, REMOTE_OFFSET));
> -		err = lm90_write16(data->client, LM90_REG_REMOTE_OFFSH,
> -				   LM90_REG_REMOTE_OFFSL, val);
> -		if (err)
> -			break;
> -		data->temp[REMOTE_OFFSET] = val;
> +		err = lm90_set_temp_offset(data, lm90_temp_offset_index[channel],
> +					   channel, val);
>  		break;
>  	default:
>  		err = -EOPNOTSUPP;
> @@ -2803,6 +2841,8 @@ static int lm90_probe(struct i2c_client *client)
>  		}
>  		if (data->flags & LM90_HAVE_EMERGENCY_ALARM)
>  			data->channel_config[2] |= HWMON_T_EMERGENCY_ALARM;
> +		if (data->flags & LM90_HAVE_OFFSET)
> +			data->channel_config[2] |= HWMON_T_OFFSET;
>  	}
>  
>  	data->faultqueue_mask = lm90_params[data->kind].faultqueue_mask;



[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux