Re: [PATCH v7 2/2] hwmon: Add driver for Texas Instruments TMP464 and TMP468

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Le 3/3/2022 à 4:00 PM, Guenter Roeck a écrit :
On 3/3/22 00:57, Agathe Porte wrote:
Hi Guenter,

Le 02/03/2022 à 18:59, Guenter Roeck a écrit :
Any review / test feedback on this patch ? I would like to apply it
before the commit window opens, but the time is getting short.

I thought that you did receive the TMP464 samples and had the opportunity to test on it. I will test v7 on our hardware equipped with TMP464, verify that DT support works fine, and will reply to this email with my findings.


Yes, I did, and thanks a lot for it! I even wrote a qemu emulation
for the chip to be able to test the devicetree code.

Great!

Still, I need to have someone else confirm that I didn't mess up.

I tested v7 on our hardware and the behavior seems to be the same as our previous, in-house driver, if that gives you a point of comparison. We only use temp*_input sysfs though.

No compilation warnings.

I can disable and enable sensors fine at runtime:

# cat temp*_input
43063
35813
34938
39313
29125
# echo 0 | tee temp*_enable
0
# cat temp*_input
cat: temp1_input: No data available
cat: temp2_input: No data available
cat: temp3_input: No data available
cat: temp4_input: No data available
cat: temp5_input: No data available
# echo 1 | tee temp*_enable
1
# cat temp*_input
43063
35750
34875
39313
29188

For what it's worth:

Tested-by: Agathe Porte <agathe.porte@xxxxxxxxx>

Bests.




[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux