Right now, we only use bits 0 to 7 of the fan/temp sensor number
by doing number & 0xff. Passing the value as a u8 makes this
step unnecessary. Also add checks to the ioctl handler since
users might get confused when passing 0x00000101 does the same
as passing 0x00000001.
Tested on a Dell Inspiron 3505.
Signed-off-by: Armin Wolf <W_Armin@xxxxxx>
---
drivers/hwmon/dell-smm-hwmon.c | 68 ++++++++++++++++++++++------------
1 file changed, 45 insertions(+), 23 deletions(-)
diff --git a/drivers/hwmon/dell-smm-hwmon.c b/drivers/hwmon/dell-smm-hwmon.c
index 3b49e55d060f..a102034a1d38 100644
--- a/drivers/hwmon/dell-smm-hwmon.c
+++ b/drivers/hwmon/dell-smm-hwmon.c
@@ -21,6 +21,7 @@
#include <linux/errno.h>
#include <linux/hwmon.h>
#include <linux/init.h>
+#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
@@ -254,46 +255,52 @@ static int i8k_smm(struct smm_regs *regs)
/*
* Read the fan status.
*/
-static int i8k_get_fan_status(const struct dell_smm_data *data, int fan)
+static int i8k_get_fan_status(const struct dell_smm_data *data, u8 fan)
{
- struct smm_regs regs = { .eax = I8K_SMM_GET_FAN, };
+ struct smm_regs regs = {
+ .eax = I8K_SMM_GET_FAN,
+ .ebx = fan,
+ };
if (data->disallow_fan_support)
return -EINVAL;
- regs.ebx = fan & 0xff;
return i8k_smm(®s) ? : regs.eax & 0xff;
}
/*
* Read the fan speed in RPM.
*/
-static int i8k_get_fan_speed(const struct dell_smm_data *data, int fan)
+static int i8k_get_fan_speed(const struct dell_smm_data *data, u8 fan)
{
- struct smm_regs regs = { .eax = I8K_SMM_GET_SPEED, };
+ struct smm_regs regs = {
+ .eax = I8K_SMM_GET_SPEED,
+ .ebx = fan,
+ };
if (data->disallow_fan_support)
return -EINVAL;
- regs.ebx = fan & 0xff;
return i8k_smm(®s) ? : (regs.eax & 0xffff) * data->i8k_fan_mult;
}
/*
* Read the fan type.
*/
-static int _i8k_get_fan_type(const struct dell_smm_data *data, int fan)
+static int _i8k_get_fan_type(const struct dell_smm_data *data, u8 fan)
{
- struct smm_regs regs = { .eax = I8K_SMM_GET_FAN_TYPE, };
+ struct smm_regs regs = {
+ .eax = I8K_SMM_GET_FAN_TYPE,
+ .ebx = fan,
+ };
if (data->disallow_fan_support || data->disallow_fan_type_call)
return -EINVAL;
- regs.ebx = fan & 0xff;
return i8k_smm(®s) ? : regs.eax & 0xff;
}
-static int i8k_get_fan_type(struct dell_smm_data *data, int fan)
+static int i8k_get_fan_type(struct dell_smm_data *data, u8 fan)
{
/* I8K_SMM_GET_FAN_TYPE SMM call is expensive, so cache values */
if (data->fan_type[fan] == INT_MIN)
@@ -305,14 +312,16 @@ static int i8k_get_fan_type(struct dell_smm_data *data, int fan)
/*
* Read the fan nominal rpm for specific fan speed.
*/
-static int __init i8k_get_fan_nominal_speed(const struct dell_smm_data *data, int fan, int speed)
+static int __init i8k_get_fan_nominal_speed(const struct dell_smm_data *data, u8 fan, int speed)
{
- struct smm_regs regs = { .eax = I8K_SMM_GET_NOM_SPEED, };
+ struct smm_regs regs = {
+ .eax = I8K_SMM_GET_NOM_SPEED,
+ .ebx = fan | (speed << 8),
+ };
if (data->disallow_fan_support)
return -EINVAL;
- regs.ebx = (fan & 0xff) | (speed << 8);
return i8k_smm(®s) ? : (regs.eax & 0xffff) * data->i8k_fan_mult;
}
@@ -333,7 +342,7 @@ static int i8k_enable_fan_auto_mode(const struct dell_smm_data *data, bool enabl
/*
* Set the fan speed (off, low, high, ...).
*/
-static int i8k_set_fan(const struct dell_smm_data *data, int fan, int speed)
+static int i8k_set_fan(const struct dell_smm_data *data, u8 fan, int speed)
{
struct smm_regs regs = { .eax = I8K_SMM_SET_FAN, };
@@ -341,33 +350,35 @@ static int i8k_set_fan(const struct dell_smm_data *data, int fan, int speed)
return -EINVAL;
speed = (speed < 0) ? 0 : ((speed > data->i8k_fan_max) ? data->i8k_fan_max : speed);
- regs.ebx = (fan & 0xff) | (speed << 8);
+ regs.ebx = fan | (speed << 8);
return i8k_smm(®s);
}
-static int __init i8k_get_temp_type(int sensor)
+static int __init i8k_get_temp_type(u8 sensor)
{
- struct smm_regs regs = { .eax = I8K_SMM_GET_TEMP_TYPE, };
+ struct smm_regs regs = {
+ .eax = I8K_SMM_GET_TEMP_TYPE,
+ .ebx = sensor,
+ };
- regs.ebx = sensor & 0xff;
return i8k_smm(®s) ? : regs.eax & 0xff;
}
/*
* Read the cpu temperature.
*/
-static int _i8k_get_temp(int sensor)
+static int _i8k_get_temp(u8 sensor)
{
struct smm_regs regs = {
.eax = I8K_SMM_GET_TEMP,
- .ebx = sensor & 0xff,
+ .ebx = sensor,
};
return i8k_smm(®s) ? : regs.eax & 0xff;
}
-static int i8k_get_temp(int sensor)
+static int i8k_get_temp(u8 sensor)
{
int temp = _i8k_get_temp(sensor);
@@ -500,6 +511,9 @@ static long i8k_ioctl(struct file *fp, unsigned int cmd, unsigned long arg)
if (copy_from_user(&val, argp, sizeof(int)))
return -EFAULT;
+ if (val > U8_MAX || val < 0)
+ return -EINVAL;
+
val = i8k_get_fan_speed(data, val);
break;
@@ -507,6 +521,9 @@ static long i8k_ioctl(struct file *fp, unsigned int cmd, unsigned long arg)
if (copy_from_user(&val, argp, sizeof(int)))
return -EFAULT;
+ if (val > U8_MAX || val < 0)
+ return -EINVAL;
+
val = i8k_get_fan_status(data, val);
break;
@@ -517,6 +534,9 @@ static long i8k_ioctl(struct file *fp, unsigned int cmd, unsigned long arg)
if (copy_from_user(&val, argp, sizeof(int)))
return -EFAULT;
+ if (val > U8_MAX || val < 0)
+ return -EINVAL;
+
if (copy_from_user(&speed, argp + 1, sizeof(int)))
return -EFAULT;
@@ -924,7 +944,8 @@ static int __init dell_smm_init_hwmon(struct device *dev)
{
struct dell_smm_data *data = dev_get_drvdata(dev);
struct device *dell_smm_hwmon_dev;
- int i, state, err;
+ int state, err;
+ u8 i;
for (i = 0; i < DELL_SMM_NO_TEMP; i++) {
data->temp_type[i] = i8k_get_temp_type(i);
@@ -1245,7 +1266,8 @@ static int __init dell_smm_probe(struct platform_device *pdev)
{
struct dell_smm_data *data;
const struct dmi_system_id *id, *fan_control;
- int fan, ret;
+ int ret;
+ u8 fan;
data = devm_kzalloc(&pdev->dev, sizeof(struct dell_smm_data), GFP_KERNEL);
if (!data)
--
2.30.2
