This is one of sub-device driver for Advantech embedded controller
AHC1EC0. This driver provides sysfs ABI for Advantech related
applications to monitor the system status.
Changed in V7:
Fix the patch according to reviewer's comment:
- add new document Documentation/hwmon/ahc1ec0-hwmon.rst to describe
the sensors attributes
- pass the checking by checkpatch --strict command
- remove unnecessary error checks
- check channel account, return 0 if the second sensor is not
supported
- make current sensor alone, not in hwmon sensors array
Changed in V6:
- remove unnecessary header files
- Using [devm_]hwmon_device_register_with_info() to register
HWMON driver based on reviewer's suggestion
Signed-off-by: Campion Kang <campion.kang@xxxxxxxxxxxxxxxx>
---
Documentation/hwmon/ahc1ec0-hwmon.rst | 73 +++
drivers/hwmon/Kconfig | 10 +
drivers/hwmon/Makefile | 1 +
drivers/hwmon/ahc1ec0-hwmon.c | 701 ++++++++++++++++++++++++++
4 files changed, 785 insertions(+)
create mode 100644 Documentation/hwmon/ahc1ec0-hwmon.rst
create mode 100644 drivers/hwmon/ahc1ec0-hwmon.c
diff --git a/Documentation/hwmon/ahc1ec0-hwmon.rst b/Documentation/hwmon/ahc1ec0-hwmon.rst
new file mode 100644
index 000000000000..7fcfb8b025d9
--- /dev/null
+++ b/Documentation/hwmon/ahc1ec0-hwmon.rst
@@ -0,0 +1,73 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver ahc1ec0-hwmon
+=================================
+
+Supported chips:
+
+ * Advantech AHC1 Embedded Controller Chip for Advantech Devices
+
+ Prefix: 'ahc1ec0-hwmon'
+
+ Datasheet: Datasheet is not publicly available.
+
+Author: Campion Kang <campion.kang@xxxxxxxxxxxxxxxx>
+
+
+Description
+-----------
+
+This driver adds the temperature, voltage, current support for the Advantech
+Devices with AHC1 Embedded Controller in Advantech IIoT Group.
+The AHC1EC0 firmware is responsible for sensor data sampling and recording in
+shared registers. The firmware is impleted by Advantech firmware team, it is
+a common design suitable for different hardware pins of Advantech devices.
+The host driver according to its hardware dynamic table and profile access its
+registers and exposes them to users as hwmon interfaces.
+
+The driver now is supports the AHC1EC0 for Advantech UNO, TPC series
+devices.
+
+Usage Notes
+-----------
+
+This driver will automatically probe and start via ahc1ec0 mfd driver
+according to the attributes in ACPI table or device tree. More detail settings
+you can refer the Documentation\devicetree\bindings\mfd\ahc1ec0.yaml.
+
+The ahc1ec0 driver will not probe automatic. You will have to instantiate
+devices explicitly. You can add it to /etc/modules.conf or insert module by
+the following command:
+
+ # insmod ahc1ec0
+
+
+Sysfs attributes
+----------------
+
+The following attributes are supported:
+
+- Advantech AHC1 Embedded Controller for Advantech UNO, TPC series:
+
+======================= =======================================================
+tempX_input Temperature of the component (specified by tempX_label)
+tempX_crit Temperature critical setpoint of the component
+temp1_label "CPU Temp"
+temp2_label "System Temp"
+
+inX_input Measured voltage of the component (specified by
+ inX_label and may different with devices)
+in0_label "VBAT"
+in1_label "5VSB"
+in2_label "Vin"
+in3_label "VCore"
+in4_label "Vin1"
+in5_label "Vin2"
+in6_label "System Voltage"
+
+curr1_input Measured current of Vin
+curr1_label "Current"
+
+======================= =======================================================
+
+All the attributes are read-only.
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 87624902ea80..242ea59e994b 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -2147,6 +2147,16 @@ config SENSORS_INTEL_M10_BMC_HWMON
sensors monitor various telemetry data of different components on the
card, e.g. board temperature, FPGA core temperature/voltage/current.
+config SENSORS_AHC1EC0_HWMON
+ tristate "Advantech AHC1EC0 Hardware Monitor Function"
+ depends on MFD_AHC1EC0
+ help
+ This driver provide support for the hardware monitoring functionality
+ for Advantech AHC1EC0 embedded controller on the board.
+
+ This driver provides the sysfs attributes for applications to monitor
+ the system status, including system temperatures, voltages, current.
+
if ACPI
comment "ACPI drivers"
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 59e78bc212cf..2df3381bf124 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -44,6 +44,7 @@ obj-$(CONFIG_SENSORS_ADT7411) += adt7411.o
obj-$(CONFIG_SENSORS_ADT7462) += adt7462.o
obj-$(CONFIG_SENSORS_ADT7470) += adt7470.o
obj-$(CONFIG_SENSORS_ADT7475) += adt7475.o
+obj-$(CONFIG_SENSORS_AHC1EC0_HWMON) += ahc1ec0-hwmon.o
obj-$(CONFIG_SENSORS_AHT10) += aht10.o
obj-$(CONFIG_SENSORS_AMD_ENERGY) += amd_energy.o
obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o
diff --git a/drivers/hwmon/ahc1ec0-hwmon.c b/drivers/hwmon/ahc1ec0-hwmon.c
new file mode 100644
index 000000000000..5502e645048b
--- /dev/null
+++ b/drivers/hwmon/ahc1ec0-hwmon.c
@@ -0,0 +1,701 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * HWMON Driver for Advantech AHC1EC0 Embedded Controller
+ *
+ * Copyright 2021, Advantech IIoT Group
+ */
+
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/hwmon.h>
+#include <linux/module.h>
+#include <linux/platform_data/ahc1ec0.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+#define EC_ACPI_THERMAL1_LOCAL_TEMP 0x60
+#define EC_ACPI_THERMAL1_REMOTE_TEMP 0x61
+
+struct ec_hwmon_attrs {
+ const char *name;
+ umode_t mode;
+ int (*read)(struct device *dev, long *val);
+};
+
+struct adv_hwmon_profile {
+ int offset;
+ unsigned long resolution, resolution_vin, resolution_sys, resolution_curr, resolution_power;
+ unsigned long r1, r1_vin, r1_sys, r1_curr, r1_power;
+ unsigned long r2, r2_vin, r2_sys, r2_curr, r2_power;
+ int hwmon_in_list_cnt;
+ int curr_list_cnt;
+ int temp_list_cnt;
+ int *hwmon_in_list;
+ int *curr_list;
+ int *temp_list;
+};
+
+struct ec_hwmon_data {
+ struct device *dev;
+ struct device *hwmon_dev;
+ struct adv_ec_ddata *ddata;
+ unsigned long temperature[3];
+ unsigned long ec_current[5];
+ unsigned long power[5];
+ unsigned long voltage[7];
+
+ struct ec_hw_pin_table pin_tbl;
+ struct ec_smbuso_em0 ec_smboem0;
+ struct adv_hwmon_profile *profile;
+};
+
+enum ec_hwmon_in_type {
+ EC_HWMON_IN_VBAT,
+ EC_HWMON_IN_5VSB,
+ EC_HWMON_IN_12V,
+ EC_HWMON_IN_VCORE,
+ EC_HWMON_IN_VIN1,
+ EC_HWMON_IN_VIN2,
+ EC_HWMON_IN_SYS_VOL,
+};
+
+enum ec_curr_type {
+ EC_VIN_CURRENT,
+};
+
+enum ec_temp_type {
+ EC_TEMP_CPU,
+ EC_TEMP_SYS,
+};
+
+static int hwmon_in_list_0[] = {
+ EC_HWMON_IN_VBAT,
+ EC_HWMON_IN_5VSB,
+ EC_HWMON_IN_12V,
+ EC_HWMON_IN_VCORE,
+};
+
+static int hwmon_in_list_1[] = {
+ EC_HWMON_IN_VBAT,
+ EC_HWMON_IN_5VSB,
+ EC_HWMON_IN_12V,
+ EC_HWMON_IN_VCORE,
+};
+
+static int curr_list_0[] = {
+ EC_VIN_CURRENT,
+};
+
+static int temp_list_0[] = {
+ EC_TEMP_CPU,
+};
+
+static int temp_list_1[] = {
+ EC_TEMP_CPU,
+ EC_TEMP_SYS,
+};
+
+static struct adv_hwmon_profile advec_profile[] = {
+ /* [0] AHC1EC0_HWMON_PRO_TEMPLATE
+ * The following Advantech hardware devices are for this configuration:
+ * TPC-8100TR, TPC-651T-E3AE, TPC-1251T-E3AE, TPC-1551T-E3AE,
+ * TPC-1751T-E3AE, TPC-1051WP-E3AE, TPC-1551WP-E3AE, TPC-1581WP-433AE,
+ * TPC-1782H-433AE, UNO-1483G-434AE, UNO-2483G-434AE, UNO-3483G-374AE,
+ * UNO-2473G, UNO-2484G-6???AE, UNO-2484G-7???AE, UNO-3283G-674AE,
+ * UNO-3285G-674AE
+ */
+ {
+ .resolution = 2929,
+ .r1 = 1912,
+ .r2 = 1000,
+ .offset = 0,
+ .hwmon_in_list_cnt = ARRAY_SIZE(hwmon_in_list_0),
+ .hwmon_in_list = hwmon_in_list_0,
+ .temp_list_cnt = ARRAY_SIZE(temp_list_0),
+ .temp_list = temp_list_0,
+ .curr_list_cnt = ARRAY_SIZE(curr_list_0),
+ .curr_list = curr_list_0,
+ },
+ /* [1] AHC1EC0_HWMON_PRO_TPC5XXX
+ * The following Advantech hardware devices are for 2nd configuration:
+ * TPC-B500-6??AE, TPC-5???T-6??AE, TPC-5???W-6??AE, TPC-B200-???AE,
+ * TPC-2???T-???AE, TPC-2???W-???AE
+ */
+ {
+ .resolution = 2929,
+ .r1 = 1912,
+ .r2 = 1000,
+ .offset = 0,
+ .hwmon_in_list_cnt = ARRAY_SIZE(hwmon_in_list_1),
+ .hwmon_in_list = hwmon_in_list_1,
+ .temp_list_cnt = ARRAY_SIZE(temp_list_0),
+ .temp_list = temp_list_0,
+ .curr_list_cnt = 0,
+ },
+ /* [2] AHC1EC0_HWMON_PRO_PRVR4
+ * The PR/VR4 devices are this configuration.
+ */
+ {
+ .resolution = 2929,
+ .r1 = 1912,
+ .r2 = 1000,
+ .offset = 0,
+ .hwmon_in_list_cnt = ARRAY_SIZE(hwmon_in_list_1),
+ .hwmon_in_list = hwmon_in_list_1,
+ .temp_list_cnt = ARRAY_SIZE(temp_list_1),
+ .temp_list = temp_list_1,
+ .curr_list_cnt = 0,
+ },
+ /* [3] AHC1EC0_HWMON_PRO_UNO2271G
+ * The following Advantech hardware devices are using this configuration:
+ * UNO-2271G-E22AE/E23AE/E022AE/E023AE series and UNO-420 devices
+ */
+ {
+ .resolution = 2929,
+ .r1 = 1912,
+ .r2 = 1000,
+ .offset = 0,
+ .hwmon_in_list_cnt = ARRAY_SIZE(hwmon_in_list_1),
+ .hwmon_in_list = hwmon_in_list_1,
+ .temp_list_cnt = ARRAY_SIZE(temp_list_0),
+ .temp_list = temp_list_0,
+ .curr_list_cnt = 0,
+ },
+};
+
+static void adv_ec_init_hwmon_profile(u32 profile, struct ec_hwmon_data *lmsensor_data)
+{
+ int i;
+ struct ec_hw_pin_table *ptbl = &lmsensor_data->pin_tbl;
+ struct adv_ec_ddata *ddata = lmsensor_data->ddata;
+ struct ec_dynamic_table *dym_tbl = ddata->dym_tbl;
+
+ lmsensor_data->profile = &advec_profile[profile];
+
+ for (i = 0; i < EC_MAX_TBL_NUM ; i++) {
+ switch (dym_tbl[i].device_id) {
+ case EC_DID_CMOSBAT:
+ ptbl->vbat[0] = dym_tbl[i].hw_pin_num;
+ ptbl->vbat[1] = 1;
+ break;
+ case EC_DID_CMOSBAT_X2:
+ ptbl->vbat[0] = dym_tbl[i].hw_pin_num;
+ ptbl->vbat[1] = 2;
+ break;
+ case EC_DID_CMOSBAT_X10:
+ ptbl->vbat[0] = dym_tbl[i].hw_pin_num;
+ ptbl->vbat[1] = 10;
+ break;
+ case EC_DID_5VS0:
+ case EC_DID_5VS5:
+ ptbl->v5[0] = dym_tbl[i].hw_pin_num;
+ ptbl->v5[1] = 1;
+ break;
+ case EC_DID_5VS0_X2:
+ case EC_DID_5VS5_X2:
+ ptbl->v5[0] = dym_tbl[i].hw_pin_num;
+ ptbl->v5[1] = 2;
+ break;
+ case EC_DID_5VS0_X10:
+ case EC_DID_5VS5_X10:
+ ptbl->v5[0] = dym_tbl[i].hw_pin_num;
+ ptbl->v5[1] = 10;
+ break;
+ case EC_DID_12VS0:
+ ptbl->v12[0] = dym_tbl[i].hw_pin_num;
+ ptbl->v12[1] = 1;
+ break;
+ case EC_DID_12VS0_X2:
+ ptbl->v12[0] = dym_tbl[i].hw_pin_num;
+ ptbl->v12[1] = 2;
+ break;
+ case EC_DID_12VS0_X10:
+ ptbl->v12[0] = dym_tbl[i].hw_pin_num;
+ ptbl->v12[1] = 10;
+ break;
+ case EC_DID_VCOREA:
+ case EC_DID_VCOREB:
+ ptbl->vcore[0] = dym_tbl[i].hw_pin_num;
+ ptbl->vcore[1] = 1;
+ break;
+ case EC_DID_VCOREA_X2:
+ case EC_DID_VCOREB_X2:
+ ptbl->vcore[0] = dym_tbl[i].hw_pin_num;
+ ptbl->vcore[1] = 2;
+ break;
+ case EC_DID_VCOREA_X10:
+ case EC_DID_VCOREB_X10:
+ ptbl->vcore[0] = dym_tbl[i].hw_pin_num;
+ ptbl->vcore[1] = 10;
+ break;
+ case EC_DID_DC:
+ ptbl->vdc[0] = dym_tbl[i].hw_pin_num;
+ ptbl->vdc[1] = 1;
+ break;
+ case EC_DID_DC_X2:
+ ptbl->vdc[0] = dym_tbl[i].hw_pin_num;
+ ptbl->vdc[1] = 2;
+ break;
+ case EC_DID_DC_X10:
+ ptbl->vdc[0] = dym_tbl[i].hw_pin_num;
+ ptbl->vdc[1] = 10;
+ break;
+ case EC_DID_CURRENT:
+ ptbl->ec_current[0] = dym_tbl[i].hw_pin_num;
+ ptbl->ec_current[1] = 1;
+ break;
+ case EC_DID_SMBOEM0:
+ lmsensor_data->ec_smboem0.hw_pin_num = dym_tbl[i].hw_pin_num;
+ break;
+ default:
+ break;
+ }
+ }
+}
+
+static int get_ec_in_vbat_input(struct device *dev, long *val)
+{
+ unsigned int temp = 0;
+ unsigned long voltage = 0;
+ struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
+ struct ec_hw_pin_table *ptbl = &lmsensor_data->pin_tbl;
+ struct adv_hwmon_profile *profile = lmsensor_data->profile;
+ struct adv_ec_ddata *ddata = lmsensor_data->ddata;
+
+ temp = ahc1ec_read_adc_value(ddata, ptbl->vbat[0], ptbl->vbat[1]);
+
+ if (profile->r2 != 0)
+ voltage = temp * (profile->r1 + profile->r2) / profile->r2;
+
+ if (profile->resolution != 0)
+ voltage = temp * profile->resolution / 1000 / 1000;
+
+ if (profile->offset != 0)
+ voltage += (int)profile->offset * 100;
+
+ lmsensor_data->voltage[0] = 10 * voltage;
+
+ *val = lmsensor_data->voltage[0];
+ return 0;
+}
+
+static int get_ec_in_v5_input(struct device *dev, long *val)
+{
+ unsigned int temp;
+ unsigned long voltage = 0;
+ struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
+ struct ec_hw_pin_table *ptbl = &lmsensor_data->pin_tbl;
+ struct adv_hwmon_profile *profile = lmsensor_data->profile;
+ struct adv_ec_ddata *ddata = lmsensor_data->ddata;
+
+ temp = ahc1ec_read_adc_value(ddata, ptbl->v5[0], ptbl->v5[1]);
+
+ if (profile->r2 != 0)
+ voltage = temp * (profile->r1 + profile->r2) / profile->r2;
+
+ if (profile->resolution != 0)
+ voltage = temp * profile->resolution / 1000 / 1000;
+
+ if (profile->offset != 0)
+ voltage += (int)profile->offset * 100;
+
+ lmsensor_data->voltage[1] = 10 * voltage;
+
+ *val = lmsensor_data->voltage[1];
+ return 0;
+}
+
+static int get_ec_in_v12_input(struct device *dev, long *val)
+{
+ int temp;
+ unsigned long voltage = 0;
+ struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
+ struct ec_hw_pin_table *ptbl = &lmsensor_data->pin_tbl;
+ struct adv_hwmon_profile *profile = lmsensor_data->profile;
+ struct adv_ec_ddata *ddata = lmsensor_data->ddata;
+
+ temp = ahc1ec_read_adc_value(ddata, ptbl->v12[0], ptbl->v12[1]);
+ if (temp == -1)
+ temp = ahc1ec_read_adc_value(ddata, ptbl->vdc[0], ptbl->vdc[1]);
+
+ if (profile->r2 != 0)
+ voltage = temp * (profile->r1 + profile->r2) / profile->r2;
+
+ if (profile->resolution != 0)
+ voltage = temp * profile->resolution / 1000 / 1000;
+
+ if (profile->offset != 0)
+ voltage += profile->offset * 100;
+
+ lmsensor_data->voltage[2] = 10 * voltage;
+
+ *val = lmsensor_data->voltage[2];
+ return 0;
+}
+
+static int get_ec_in_vcore_input(struct device *dev, long *val)
+{
+ int temp;
+ unsigned int voltage = 0;
+ struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
+ struct ec_hw_pin_table *ptbl = &lmsensor_data->pin_tbl;
+ struct adv_hwmon_profile *profile = lmsensor_data->profile;
+ struct adv_ec_ddata *ddata = lmsensor_data->ddata;
+
+ temp = ahc1ec_read_adc_value(ddata, ptbl->vcore[0], ptbl->vcore[1]);
+
+ if (profile->r2 != 0)
+ voltage = temp * (profile->r1 + profile->r2) / profile->r2;
+
+ if (profile->resolution != 0)
+ voltage = temp * profile->resolution / 1000 / 1000;
+
+ if (profile->offset != 0)
+ voltage += profile->offset * 100;
+
+ lmsensor_data->voltage[3] = 10 * voltage;
+
+ *val = lmsensor_data->voltage[3];
+ return 0;
+}
+
+static int get_ec_current1_input(struct device *dev, long *val)
+{
+ int temp;
+ struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
+ struct ec_hw_pin_table *ptbl = &lmsensor_data->pin_tbl;
+ struct adv_hwmon_profile *profile = lmsensor_data->profile;
+ struct adv_ec_ddata *ddata = lmsensor_data->ddata;
+
+ temp = ahc1ec_read_adc_value(ddata, ptbl->ec_current[0], ptbl->ec_current[1]);
+
+ if (profile->r2 != 0)
+ temp = temp * (profile->r1 + profile->r2) / profile->r2;
+
+ if (profile->resolution != 0)
+ temp = temp * profile->resolution / 1000 / 1000;
+
+ if (profile->offset != 0)
+ temp += profile->offset * 100;
+
+ lmsensor_data->ec_current[3] = 10 * temp;
+
+ *val = lmsensor_data->ec_current[3];
+ return 0;
+}
+
+static int get_ec_cpu_temp(struct device *dev, long *val)
+{
+ int ret;
+ unsigned char value;
+ struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
+ struct adv_ec_ddata *ddata = lmsensor_data->ddata;
+
+ ret = ahc1ec_read_acpi_value(ddata, EC_ACPI_THERMAL1_REMOTE_TEMP, &value);
+ if (!ret)
+ *val = 1000 * value;
+ return ret;
+}
+
+static int get_ec_sys_temp(struct device *dev, long *val)
+{
+ int ret;
+ unsigned char value;
+ struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
+ struct adv_ec_ddata *ddata = lmsensor_data->ddata;
+
+ ret = ahc1ec_read_acpi_value(ddata, EC_ACPI_THERMAL1_LOCAL_TEMP, &value);
+ if (!ret)
+ *val = 1000 * value;
+ return ret;
+}
+
+const struct ec_hwmon_attrs ec_hwmon_in_attr_template[] = {
+ {"VBAT", 0444, get_ec_in_vbat_input},
+ {"5VSB", 0444, get_ec_in_v5_input},
+ {"Vin", 0444, get_ec_in_v12_input},
+ {"VCORE", 0444, get_ec_in_vcore_input},
+ {"Vin1", 0444, NULL},
+ {"Vin2", 0444, NULL},
+ {"System Voltage", 0444, NULL},
+ {"Current", 0444, get_ec_current1_input},
+};
+
+const struct ec_hwmon_attrs ec_curr_attr_template[] = {
+ {"Current", 0444, get_ec_current1_input},
+};
+
+const struct ec_hwmon_attrs ec_temp_attrs_template[] = {
+ {"CPU Temp", 0444, get_ec_cpu_temp},
+ {"System Temp", 0444, get_ec_sys_temp},
+};
+
+static int ahc1ec0_read_in(struct device *dev, u32 attr, int channel, long *val)
+{
+ struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
+
+ if (attr == hwmon_in_input) {
+ int index = lmsensor_data->profile->hwmon_in_list[channel];
+ const struct ec_hwmon_attrs *ec_hwmon_attr = &ec_hwmon_in_attr_template[index];
+
+ return ec_hwmon_attr->read(dev, val);
+ }
+
+ return -EOPNOTSUPP;
+}
+
+static int ahc1ec0_read_curr(struct device *dev, u32 attr, int channel, long *val)
+{
+ struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
+
+ if (attr == hwmon_curr_input) {
+ int index = lmsensor_data->profile->curr_list[channel];
+ const struct ec_hwmon_attrs *ec_hwmon_attr = &ec_curr_attr_template[index];
+
+ return ec_hwmon_attr->read(dev, val);
+ }
+
+ return -EOPNOTSUPP;
+}
+
+static int ahc1ec0_read_temp(struct device *dev, u32 attr, int channel, long *val)
+{
+ struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
+
+ switch (attr) {
+ case hwmon_temp_input: {
+ int index = lmsensor_data->profile->temp_list[channel];
+ const struct ec_hwmon_attrs *devec_hwmon_attr =
+ &ec_temp_attrs_template[index];
+
+ return devec_hwmon_attr->read(dev, val);
+ }
+ case hwmon_temp_crit:
+ /* both CPU temp and System temp are all this value */
+ *val = 100000;
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int ahc1ec0_read_string(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, const char **str)
+{
+ struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
+
+ if (type == hwmon_in && attr == hwmon_in_label) {
+ int index = lmsensor_data->profile->hwmon_in_list[channel];
+ const struct ec_hwmon_attrs *ec_hwmon_attr = &ec_hwmon_in_attr_template[index];
+
+ *str = ec_hwmon_attr->name;
+ return 0;
+ }
+
+ if (type == hwmon_curr && attr == hwmon_curr_label) {
+ int index = lmsensor_data->profile->curr_list[channel];
+ const struct ec_hwmon_attrs *ec_hwmon_attr = &ec_curr_attr_template[index];
+
+ *str = ec_hwmon_attr->name;
+ return 0;
+ }
+
+ if (type == hwmon_temp && attr == hwmon_temp_label) {
+ int index = lmsensor_data->profile->temp_list[channel];
+ const struct ec_hwmon_attrs *ec_hwmon_attr = &ec_temp_attrs_template[index];
+
+ *str = ec_hwmon_attr->name;
+ return 0;
+ }
+
+ return -EOPNOTSUPP;
+}
+
+static int ahc1ec0_read(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ switch (type) {
+ case hwmon_in:
+ return ahc1ec0_read_in(dev, attr, channel, val);
+ case hwmon_curr:
+ return ahc1ec0_read_curr(dev, attr, channel, val);
+ case hwmon_temp:
+ return ahc1ec0_read_temp(dev, attr, channel, val);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static umode_t ec_hwmon_in_visible(const void *data, u32 attr, int channel)
+{
+ struct ec_hwmon_data *lmsensor_data = (struct ec_hwmon_data *)data;
+
+ switch (attr) {
+ case hwmon_in_input:
+ case hwmon_in_label:
+ if (lmsensor_data->profile->hwmon_in_list_cnt > channel)
+ return 0444;
+ else
+ return 0;
+ default:
+ return 0;
+ }
+}
+
+static umode_t ec_curr_visible(const void *data, u32 attr, int channel)
+{
+ struct ec_hwmon_data *lmsensor_data = (struct ec_hwmon_data *)data;
+
+ switch (attr) {
+ case hwmon_curr_input:
+ case hwmon_curr_label:
+ if (lmsensor_data->profile->curr_list_cnt > channel)
+ return 0444;
+ else
+ return 0;
+ default:
+ return 0;
+ }
+}
+
+static umode_t ec_temp_visible(const void *data, u32 attr, int channel)
+{
+ struct ec_hwmon_data *lmsensor_data = (struct ec_hwmon_data *)data;
+
+ switch (attr) {
+ case hwmon_temp_input:
+ case hwmon_temp_crit:
+ case hwmon_temp_label:
+ if (lmsensor_data->profile->temp_list_cnt > channel)
+ return 0444;
+ else
+ return 0;
+ default:
+ return 0;
+ }
+}
+
+static umode_t ahc1ec0_is_visible(const void *data, enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ switch (type) {
+ case hwmon_in:
+ return ec_hwmon_in_visible(data, attr, channel);
+ case hwmon_curr:
+ return ec_curr_visible(data, attr, channel);
+ case hwmon_temp:
+ return ec_temp_visible(data, attr, channel);
+ default:
+ return 0;
+ }
+}
+
+static const u32 ahc1ec0_in_config[] = {
+ HWMON_I_INPUT | HWMON_I_LABEL,
+ HWMON_I_INPUT | HWMON_I_LABEL,
+ HWMON_I_INPUT | HWMON_I_LABEL,
+ HWMON_I_INPUT | HWMON_I_LABEL,
+ 0
+};
+
+static const struct hwmon_channel_info ahc1ec0_in = {
+ .type = hwmon_in,
+ .config = ahc1ec0_in_config,
+};
+
+static const u32 ahc1ec0_curr_config[] = {
+ HWMON_C_INPUT | HWMON_C_LABEL,
+ 0
+};
+
+static const struct hwmon_channel_info ahc1ec0_curr = {
+ .type = hwmon_curr,
+ .config = ahc1ec0_curr_config,
+};
+
+static const u32 ahc1ec0_temp_config[] = {
+ HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_LABEL,
+ 0
+};
+
+static const struct hwmon_channel_info ahc1ec0_temp = {
+ .type = hwmon_temp,
+ .config = ahc1ec0_temp_config,
+};
+
+static const struct hwmon_channel_info *ahc1ec0_info[] = {
+ &ahc1ec0_in,
+ &ahc1ec0_curr,
+ &ahc1ec0_temp,
+ NULL
+};
+
+static const struct hwmon_ops ahc1ec0_hwmon_ops = {
+ .is_visible = ahc1ec0_is_visible,
+ .read = ahc1ec0_read,
+ .read_string = ahc1ec0_read_string,
+};
+
+static const struct hwmon_chip_info ahc1ec0_chip_info = {
+ .ops = &ahc1ec0_hwmon_ops,
+ .info = ahc1ec0_info,
+};
+
+static int adv_ec_hwmon_probe(struct platform_device *pdev)
+{
+ int ret;
+ u32 profile;
+ struct device *dev = &pdev->dev;
+ struct adv_ec_ddata *ddata;
+ struct ec_hwmon_data *lmsensor_data;
+
+ ddata = dev_get_drvdata(dev->parent);
+ if (!ddata)
+ return -EINVAL;
+
+ ret = device_property_read_u32(dev->parent, "advantech,hwmon-profile", &profile);
+ if (ret < 0) {
+ dev_dbg(dev, "get hwmon-profile failed! (%d)", ret);
+ return ret;
+ }
+
+ if (profile >= ARRAY_SIZE(advec_profile)) {
+ dev_dbg(dev, "not support hwmon profile(%d)!\n", profile);
+ return -EINVAL;
+ }
+
+ lmsensor_data = devm_kzalloc(dev, sizeof(*lmsensor_data), GFP_KERNEL);
+ if (!lmsensor_data)
+ return -ENOMEM;
+
+ lmsensor_data->ddata = ddata;
+ lmsensor_data->dev = dev;
+ dev_set_drvdata(dev, lmsensor_data);
+
+ adv_ec_init_hwmon_profile(profile, lmsensor_data);
+
+ lmsensor_data->hwmon_dev =
+ devm_hwmon_device_register_with_info(dev, "ahc1ec0.hwmon", lmsensor_data,
+ &ahc1ec0_chip_info, NULL);
+
+ return PTR_ERR_OR_ZERO(lmsensor_data->hwmon_dev);
+}
+
+static struct platform_driver adv_hwmon_drv = {
+ .driver = {
+ .name = "ahc1ec0-hwmon",
+ },
+ .probe = adv_ec_hwmon_probe,
+};
+module_platform_driver(adv_hwmon_drv);
+
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_ALIAS("platform:ahc1ec0-hwmon");
+MODULE_DESCRIPTION("Advantech Embedded Controller HWMON Driver.");
+MODULE_AUTHOR("Campion Kang <campion.kang@xxxxxxxxxxxxxxxx>");
+MODULE_AUTHOR("Jianfeng Dai <jianfeng.dai@xxxxxxxxxxxxxxxx>");
+MODULE_VERSION("1.0");
--
2.17.1
