Adds support for reading the critical values of the temperature sensors
and the rail sensors (voltage and current) once and caches them. Updates
the naming of the constants following a more clear scheme. Also updates
the documentation and fixes a typo.
The new sensors output of a Corsair HX850i will look like this:
corsairpsu-hid-3-1
Adapter: HID adapter
v_in: 230.00 V
v_out +12v: 12.14 V (crit min = +8.41 V, crit max = +15.59 V)
v_out +5v: 5.03 V (crit min = +3.50 V, crit max = +6.50 V)
v_out +3.3v: 3.30 V (crit min = +2.31 V, crit max = +4.30 V)
psu fan: 0 RPM
vrm temp: +46.2°C (crit = +70.0°C)
case temp: +39.8°C (crit = +70.0°C)
power total: 152.00 W
power +12v: 108.00 W
power +5v: 41.00 W
power +3.3v: 5.00 W
curr in: N/A
curr +12v: 9.00 A (crit max = +85.00 A)
curr +5v: 8.31 A (crit max = +40.00 A)
curr +3.3v: 1.62 A (crit max = +40.00 A)
This patch changes:
- hwmon corsair-psu documentation
- hwmon corsair-psu driver
Signed-off-by: Wilken Gottwalt <wilken.gottwalt@xxxxxxxxxx>
---
Documentation/hwmon/corsair-psu.rst | 13 +-
drivers/hwmon/corsair-psu.c | 185 ++++++++++++++++++++++------
2 files changed, 157 insertions(+), 41 deletions(-)
diff --git a/Documentation/hwmon/corsair-psu.rst b/Documentation/hwmon/corsair-psu.rst
index 396b95c9a76a..b77e53810a13 100644
--- a/Documentation/hwmon/corsair-psu.rst
+++ b/Documentation/hwmon/corsair-psu.rst
@@ -45,19 +45,30 @@ Sysfs entries
-------------
======================= ========================================================
+curr2_crit Current max critical value on the 12v psu rail
+curr3_crit Current max critical value on the 5v psu rail
+curr4_crit Current max critical value on the 3.3v psu rail
curr1_input Total current usage
curr2_input Current on the 12v psu rail
curr3_input Current on the 5v psu rail
curr4_input Current on the 3.3v psu rail
fan1_input RPM of psu fan
+in1_crit Voltage max critical value on the 12v psu rail
+in2_crit Voltage max critical value on the 5v psu rail
+in3_crit Voltage max critical value on the 3.3v psu rail
in0_input Voltage of the psu ac input
in1_input Voltage of the 12v psu rail
in2_input Voltage of the 5v psu rail
-in3_input Voltage of the 3.3 psu rail
+in3_input Voltage of the 3.3v psu rail
+in1_lcrit Voltage min critical value on the 12v psu rail
+in2_lcrit Voltage min critical value on the 5v psu rail
+in3_lcrit Voltage min critical value on the 3.3v psu rail
power1_input Total power usage
power2_input Power usage of the 12v psu rail
power3_input Power usage of the 5v psu rail
power4_input Power usage of the 3.3v psu rail
+temp1_crit Temperature max cirtical value of the psu vrm component
+temp2_crit Temperature max critical value of psu case
temp1_input Temperature of the psu vrm component
temp2_input Temperature of the psu case
======================= ========================================================
diff --git a/drivers/hwmon/corsair-psu.c b/drivers/hwmon/corsair-psu.c
index b0953eeeb2d3..141a5079ea7e 100644
--- a/drivers/hwmon/corsair-psu.c
+++ b/drivers/hwmon/corsair-psu.c
@@ -53,11 +53,21 @@
#define CMD_TIMEOUT_MS 250
#define SECONDS_PER_HOUR (60 * 60)
#define SECONDS_PER_DAY (SECONDS_PER_HOUR * 24)
+#define RAIL_COUNT 3 /* 3v3 + 5v + 12v */
+#define CRIT_VALUES_COUNT 11 /* 2 temp crit + 6 rail volts (low and high) + 3 rails amps */
+#define TEMP_HCRIT 0
+#define VOLTS_RAIL_HCRIT 2
+#define VOLTS_RAIL_LCRIT 5
+#define AMPS_RAIL_HCRIT 8
#define PSU_CMD_SELECT_RAIL 0x00 /* expects length 2 */
-#define PSU_CMD_IN_VOLTS 0x88 /* the rest of the commands expect length 3 */
+#define PSU_CMD_RAIL_VOLTS_HCRIT 0x40 /* the rest of the commands expect length 3 */
+#define PSU_CMD_RAIL_VOLTS_LCRIT 0x44
+#define PSU_CMD_RAIL_AMPS_HCRIT 0x46
+#define PSU_CMD_TEMP_HCRIT 0x4F
+#define PSU_CMD_IN_VOLTS 0x88
#define PSU_CMD_IN_AMPS 0x89
-#define PSU_CMD_RAIL_OUT_VOLTS 0x8B
+#define PSU_CMD_RAIL_VOLTS 0x8B
#define PSU_CMD_RAIL_AMPS 0x8C
#define PSU_CMD_TEMP0 0x8D
#define PSU_CMD_TEMP1 0x8E
@@ -113,6 +123,7 @@ struct corsairpsu_data {
struct dentry *debugfs;
struct completion wait_completion;
struct mutex lock; /* for locking access to cmd_buffer */
+ long crit_values[CRIT_VALUES_COUNT];
u8 *cmd_buffer;
char vendor[REPLY_SIZE];
char product[REPLY_SIZE];
@@ -193,7 +204,10 @@ static int corsairpsu_request(struct corsairpsu_data *priv, u8 cmd, u8 rail, voi
mutex_lock(&priv->lock);
switch (cmd) {
- case PSU_CMD_RAIL_OUT_VOLTS:
+ case PSU_CMD_RAIL_VOLTS_HCRIT:
+ case PSU_CMD_RAIL_VOLTS_LCRIT:
+ case PSU_CMD_RAIL_AMPS_HCRIT:
+ case PSU_CMD_RAIL_VOLTS:
case PSU_CMD_RAIL_AMPS:
case PSU_CMD_RAIL_WATTS:
ret = corsairpsu_usb_cmd(priv, 2, PSU_CMD_SELECT_RAIL, rail, NULL);
@@ -229,9 +243,13 @@ static int corsairpsu_get_value(struct corsairpsu_data *priv, u8 cmd, u8 rail, l
*/
tmp = ((long)data[3] << 24) + (data[2] << 16) + (data[1] << 8) + data[0];
switch (cmd) {
+ case PSU_CMD_RAIL_VOLTS_HCRIT:
+ case PSU_CMD_RAIL_VOLTS_LCRIT:
+ case PSU_CMD_RAIL_AMPS_HCRIT:
+ case PSU_CMD_TEMP_HCRIT:
case PSU_CMD_IN_VOLTS:
case PSU_CMD_IN_AMPS:
- case PSU_CMD_RAIL_OUT_VOLTS:
+ case PSU_CMD_RAIL_VOLTS:
case PSU_CMD_RAIL_AMPS:
case PSU_CMD_TEMP0:
case PSU_CMD_TEMP1:
@@ -256,18 +274,70 @@ static int corsairpsu_get_value(struct corsairpsu_data *priv, u8 cmd, u8 rail, l
return ret;
}
+static void corsairpsu_get_criticals(struct corsairpsu_data *priv)
+{
+ long tmp;
+ int rail;
+ int ret;
+
+ ret = corsairpsu_get_value(priv, PSU_CMD_TEMP_HCRIT, 0, &tmp);
+ if (ret < 0)
+ pr_debug("%s: unable to read temp0 critical value\n", DRIVER_NAME);
+ else
+ priv->crit_values[TEMP_HCRIT] = tmp;
+
+ ret = corsairpsu_get_value(priv, PSU_CMD_TEMP_HCRIT, 1, &tmp);
+ if (ret < 0)
+ pr_debug("%s: unable to read temp1 cirtical value\n", DRIVER_NAME);
+ else
+ priv->crit_values[TEMP_HCRIT + 1] = tmp;
+
+ for (rail = 0; rail < RAIL_COUNT; ++rail) {
+ ret = corsairpsu_get_value(priv, PSU_CMD_RAIL_VOLTS_HCRIT, rail, &tmp);
+ if (ret < 0) {
+ pr_debug("%s: unable to read volts rail %d high critical value\n",
+ DRIVER_NAME, rail);
+ } else {
+ priv->crit_values[VOLTS_RAIL_HCRIT + rail] = tmp;
+ }
+ }
+
+ for (rail = 0; rail < RAIL_COUNT; ++rail) {
+ ret = corsairpsu_get_value(priv, PSU_CMD_RAIL_VOLTS_LCRIT, rail, &tmp);
+ if (ret < 0) {
+ pr_debug("%s: unable to read volts rail %d low critical value\n",
+ DRIVER_NAME, rail);
+ } else {
+ priv->crit_values[VOLTS_RAIL_LCRIT + rail] = tmp;
+ }
+ }
+
+ for (rail = 0; rail < RAIL_COUNT; ++rail) {
+ ret = corsairpsu_get_value(priv, PSU_CMD_RAIL_AMPS_HCRIT, rail, &tmp);
+ if (ret < 0) {
+ pr_debug("%s: unable to read amps rail %d hight critical value\n",
+ DRIVER_NAME, rail);
+ } else {
+ priv->crit_values[AMPS_RAIL_HCRIT + rail] = tmp;
+ }
+ }
+}
+
static umode_t corsairpsu_hwmon_ops_is_visible(const void *data, enum hwmon_sensor_types type,
u32 attr, int channel)
{
- if (type == hwmon_temp && (attr == hwmon_temp_input || attr == hwmon_temp_label))
+ if (type == hwmon_temp && (attr == hwmon_temp_input || attr == hwmon_temp_label ||
+ attr == hwmon_temp_crit))
return 0444;
else if (type == hwmon_fan && (attr == hwmon_fan_input || attr == hwmon_fan_label))
return 0444;
else if (type == hwmon_power && (attr == hwmon_power_input || attr == hwmon_power_label))
return 0444;
- else if (type == hwmon_in && (attr == hwmon_in_input || attr == hwmon_in_label))
+ else if (type == hwmon_in && (attr == hwmon_in_input || attr == hwmon_in_label ||
+ attr == hwmon_in_lcrit || attr == hwmon_in_crit))
return 0444;
- else if (type == hwmon_curr && (attr == hwmon_curr_input || attr == hwmon_curr_label))
+ else if (type == hwmon_curr && (attr == hwmon_curr_input || attr == hwmon_curr_label ||
+ attr == hwmon_curr_crit))
return 0444;
return 0;
@@ -277,11 +347,18 @@ static int corsairpsu_hwmon_ops_read(struct device *dev, enum hwmon_sensor_types
int channel, long *val)
{
struct corsairpsu_data *priv = dev_get_drvdata(dev);
- int ret;
-
- if (type == hwmon_temp && attr == hwmon_temp_input && channel < 2) {
- ret = corsairpsu_get_value(priv, channel ? PSU_CMD_TEMP1 : PSU_CMD_TEMP0, channel,
- val);
+ int ret = 0;
+
+ if (type == hwmon_temp && channel < 2) {
+ if (attr == hwmon_temp_input) {
+ ret = corsairpsu_get_value(priv, channel ? PSU_CMD_TEMP1 : PSU_CMD_TEMP0,
+ channel, val);
+ } else if (attr == hwmon_temp_crit) {
+ if (priv->crit_values[TEMP_HCRIT + channel] != -EOPNOTSUPP)
+ *val = priv->crit_values[TEMP_HCRIT + channel];
+ else
+ ret = -EOPNOTSUPP;
+ }
} else if (type == hwmon_fan && attr == hwmon_fan_input) {
ret = corsairpsu_get_value(priv, PSU_CMD_FAN, 0, val);
} else if (type == hwmon_power && attr == hwmon_power_input) {
@@ -295,27 +372,48 @@ static int corsairpsu_hwmon_ops_read(struct device *dev, enum hwmon_sensor_types
default:
return -EOPNOTSUPP;
}
- } else if (type == hwmon_in && attr == hwmon_in_input) {
- switch (channel) {
- case 0:
- ret = corsairpsu_get_value(priv, PSU_CMD_IN_VOLTS, 0, val);
- break;
- case 1 ... 3:
- ret = corsairpsu_get_value(priv, PSU_CMD_RAIL_OUT_VOLTS, channel - 1, val);
- break;
- default:
- return -EOPNOTSUPP;
+ } else if (type == hwmon_in) {
+ if (attr == hwmon_in_input) {
+ switch (channel) {
+ case 0:
+ ret = corsairpsu_get_value(priv, PSU_CMD_IN_VOLTS, 0, val);
+ break;
+ case 1 ... 3:
+ ret = corsairpsu_get_value(priv, PSU_CMD_RAIL_VOLTS, channel - 1,
+ val);
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+ } else if (attr == hwmon_in_crit && channel > 0 && channel < 4) {
+ if (priv->crit_values[VOLTS_RAIL_HCRIT + channel - 1] != -EOPNOTSUPP)
+ *val = priv->crit_values[VOLTS_RAIL_HCRIT + channel - 1];
+ else
+ ret = -EOPNOTSUPP;
+ } else if (attr == hwmon_in_lcrit && channel > 0 && channel < 4) {
+ if (priv->crit_values[VOLTS_RAIL_LCRIT + channel - 1] != -EOPNOTSUPP)
+ *val = priv->crit_values[VOLTS_RAIL_LCRIT + channel - 1];
+ else
+ ret = -EOPNOTSUPP;
}
- } else if (type == hwmon_curr && attr == hwmon_curr_input) {
- switch (channel) {
- case 0:
- ret = corsairpsu_get_value(priv, PSU_CMD_IN_AMPS, 0, val);
- break;
- case 1 ... 3:
- ret = corsairpsu_get_value(priv, PSU_CMD_RAIL_AMPS, channel - 1, val);
- break;
- default:
- return -EOPNOTSUPP;
+ } else if (type == hwmon_curr) {
+ if (attr == hwmon_curr_input) {
+ switch (channel) {
+ case 0:
+ ret = corsairpsu_get_value(priv, PSU_CMD_IN_AMPS, 0, val);
+ break;
+ case 1 ... 3:
+ ret = corsairpsu_get_value(priv, PSU_CMD_RAIL_AMPS, channel - 1,
+ val);
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+ } else if (attr == hwmon_curr_crit && channel > 0 && channel < 4) {
+ if (priv->crit_values[AMPS_RAIL_HCRIT + channel - 1] != -EOPNOTSUPP)
+ *val = priv->crit_values[AMPS_RAIL_HCRIT + channel - 1];
+ else
+ ret = -EOPNOTSUPP;
}
} else {
return -EOPNOTSUPP;
@@ -360,8 +458,8 @@ static const struct hwmon_channel_info *corsairpsu_info[] = {
HWMON_CHANNEL_INFO(chip,
HWMON_C_REGISTER_TZ),
HWMON_CHANNEL_INFO(temp,
- HWMON_T_INPUT | HWMON_T_LABEL,
- HWMON_T_INPUT | HWMON_T_LABEL),
+ HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT,
+ HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT),
HWMON_CHANNEL_INFO(fan,
HWMON_F_INPUT | HWMON_F_LABEL),
HWMON_CHANNEL_INFO(power,
@@ -371,14 +469,14 @@ static const struct hwmon_channel_info *corsairpsu_info[] = {
HWMON_P_INPUT | HWMON_P_LABEL),
HWMON_CHANNEL_INFO(in,
HWMON_I_INPUT | HWMON_I_LABEL,
- HWMON_I_INPUT | HWMON_I_LABEL,
- HWMON_I_INPUT | HWMON_I_LABEL,
- HWMON_I_INPUT | HWMON_I_LABEL),
+ HWMON_I_INPUT | HWMON_I_LABEL | HWMON_I_LCRIT | HWMON_I_CRIT,
+ HWMON_I_INPUT | HWMON_I_LABEL | HWMON_I_LCRIT | HWMON_I_CRIT,
+ HWMON_I_INPUT | HWMON_I_LABEL | HWMON_I_LCRIT | HWMON_I_CRIT),
HWMON_CHANNEL_INFO(curr,
HWMON_C_INPUT | HWMON_C_LABEL,
- HWMON_C_INPUT | HWMON_C_LABEL,
- HWMON_C_INPUT | HWMON_C_LABEL,
- HWMON_C_INPUT | HWMON_C_LABEL),
+ HWMON_C_INPUT | HWMON_C_LABEL | HWMON_C_CRIT,
+ HWMON_C_INPUT | HWMON_C_LABEL | HWMON_C_CRIT,
+ HWMON_C_INPUT | HWMON_C_LABEL | HWMON_C_CRIT),
NULL
};
@@ -472,6 +570,7 @@ static void corsairpsu_debugfs_init(struct corsairpsu_data *priv)
static int corsairpsu_probe(struct hid_device *hdev, const struct hid_device_id *id)
{
struct corsairpsu_data *priv;
+ int i;
int ret;
priv = devm_kzalloc(&hdev->dev, sizeof(struct corsairpsu_data), GFP_KERNEL);
@@ -482,6 +581,9 @@ static int corsairpsu_probe(struct hid_device *hdev, const struct hid_device_id
if (!priv->cmd_buffer)
return -ENOMEM;
+ for (i = 0; i < CRIT_VALUES_COUNT; ++i)
+ priv->crit_values[i] = -EOPNOTSUPP;
+
ret = hid_parse(hdev);
if (ret)
return ret;
@@ -513,6 +615,9 @@ static int corsairpsu_probe(struct hid_device *hdev, const struct hid_device_id
goto fail_and_stop;
}
+ /* this can fail and is considered non-fatal */
+ corsairpsu_get_criticals(priv);
+
priv->hwmon_dev = hwmon_device_register_with_info(&hdev->dev, "corsairpsu", priv,
&corsairpsu_chip_info, 0);
--
2.30.2
