Re: Errant readings on LM81 with T2080 SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 3/7/21 8:37 PM, Chris Packham wrote:
[ ... ]
>> That's from -ENXIO which is used in only one place in i2c-mpc.c. I'll 
>> enable some debug and see what we get.
> 
> For the errant readings there was nothing abnormal reported by the driver.
> 
> For the "No such device or address" I saw "mpc-i2c ffe119000.i2c: No 
> RXAK" which matches up with the -ENXIO return.
> 

Id suggest to check the time until not busy and stop in mpc_xfer().
Those hot loops are unusual, and may well mess up the code especially
if preempt is enabled. Also, are you using interrupts or polling in
your system ? The interrupt handler looks a bit odd, with "Read again
to allow register to stabilise".

Do you have fsl,timeout set in the devicetree properties and, if so,
have you played with it ?

Other than that, the only other real idea I have would be to monitor
the i2c bus.

Guenter



[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux