Hi Chris,
On Thu, Sep 24, 2020 at 08:51:00PM +1200, Chris Packham wrote:
> Use loops for reading temp_max and initialising FAN_MIN/TEMP_MAX rather
> than duplicating code.
>
> Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
Series applied (and module tested).
Thanks a lot for the clean submission.
Guenter
> ---
> drivers/hwmon/adm9240.c | 24 ++++++++++++------------
> 1 file changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c
> index 496d47490e10..f95dde1b9c7f 100644
> --- a/drivers/hwmon/adm9240.c
> +++ b/drivers/hwmon/adm9240.c
> @@ -223,10 +223,10 @@ static struct adm9240_data *adm9240_update_device(struct device *dev)
> data->fan_min[i] = i2c_smbus_read_byte_data(client,
> ADM9240_REG_FAN_MIN(i));
> }
> - data->temp_max[0] = i2c_smbus_read_byte_data(client,
> - ADM9240_REG_TEMP_MAX(0));
> - data->temp_max[1] = i2c_smbus_read_byte_data(client,
> - ADM9240_REG_TEMP_MAX(1));
> + for (i = 0; i < 2; i++) {
> + data->temp_max[i] = i2c_smbus_read_byte_data(client,
> + ADM9240_REG_TEMP_MAX(i));
> + }
>
> /* read fan divs and 5-bit VID */
> i = i2c_smbus_read_byte_data(client, ADM9240_REG_VID_FAN_DIV);
> @@ -687,14 +687,14 @@ static void adm9240_init_client(struct i2c_client *client)
> i2c_smbus_write_byte_data(client,
> ADM9240_REG_IN_MAX(i), 255);
> }
> - i2c_smbus_write_byte_data(client,
> - ADM9240_REG_FAN_MIN(0), 255);
> - i2c_smbus_write_byte_data(client,
> - ADM9240_REG_FAN_MIN(1), 255);
> - i2c_smbus_write_byte_data(client,
> - ADM9240_REG_TEMP_MAX(0), 127);
> - i2c_smbus_write_byte_data(client,
> - ADM9240_REG_TEMP_MAX(1), 127);
> + for (i = 0; i < 2; i++) {
> + i2c_smbus_write_byte_data(client,
> + ADM9240_REG_FAN_MIN(i), 255);
> + }
> + for (i = 0; i < 2; i++) {
> + i2c_smbus_write_byte_data(client,
> + ADM9240_REG_TEMP_MAX(i), 127);
> + }
>
> /* start measurement cycle */
> i2c_smbus_write_byte_data(client, ADM9240_REG_CONFIG, 1);
