Use loops for reading temp_max and initialising FAN_MIN/TEMP_MAX rather than duplicating code. Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx> --- drivers/hwmon/adm9240.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c index 496d47490e10..f95dde1b9c7f 100644 --- a/drivers/hwmon/adm9240.c +++ b/drivers/hwmon/adm9240.c @@ -223,10 +223,10 @@ static struct adm9240_data *adm9240_update_device(struct device *dev) data->fan_min[i] = i2c_smbus_read_byte_data(client, ADM9240_REG_FAN_MIN(i)); } - data->temp_max[0] = i2c_smbus_read_byte_data(client, - ADM9240_REG_TEMP_MAX(0)); - data->temp_max[1] = i2c_smbus_read_byte_data(client, - ADM9240_REG_TEMP_MAX(1)); + for (i = 0; i < 2; i++) { + data->temp_max[i] = i2c_smbus_read_byte_data(client, + ADM9240_REG_TEMP_MAX(i)); + } /* read fan divs and 5-bit VID */ i = i2c_smbus_read_byte_data(client, ADM9240_REG_VID_FAN_DIV); @@ -687,14 +687,14 @@ static void adm9240_init_client(struct i2c_client *client) i2c_smbus_write_byte_data(client, ADM9240_REG_IN_MAX(i), 255); } - i2c_smbus_write_byte_data(client, - ADM9240_REG_FAN_MIN(0), 255); - i2c_smbus_write_byte_data(client, - ADM9240_REG_FAN_MIN(1), 255); - i2c_smbus_write_byte_data(client, - ADM9240_REG_TEMP_MAX(0), 127); - i2c_smbus_write_byte_data(client, - ADM9240_REG_TEMP_MAX(1), 127); + for (i = 0; i < 2; i++) { + i2c_smbus_write_byte_data(client, + ADM9240_REG_FAN_MIN(i), 255); + } + for (i = 0; i < 2; i++) { + i2c_smbus_write_byte_data(client, + ADM9240_REG_TEMP_MAX(i), 127); + } /* start measurement cycle */ i2c_smbus_write_byte_data(client, ADM9240_REG_CONFIG, 1); -- 2.28.0